FabioT. FT Paints Chassis Paint - 400ml - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for owners and operators of commercial vehicles and trucks seeking a durable, protective coating for their chassis. The key benefit is robust, long-lasting protection against corrosion and environmental damage. A caveat is that proper application requires attention to detail and suitable conditions. The FabioT. RT 2K PU265 HS Chassis Topcoat is a high-build polyurethane acrylic coating, available in a 400ml aerosol, designed for heavy-duty protection. It features zinc phosphate for active corrosion resistance, a semi-gloss finish, and exceptional resistance to weather, UV, and solvents.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 2K PU265 HS |
| Brand | FabioT. |
| Container Volume | 400ml |
Extended Product Information
FAQs
What is the expected durability of this chassis paint?
The 2K polyurethane acrylic formula with zinc phosphate reinforcement provides heavy-duty, long-lasting protection against corrosion and environmental factors, designed for the harsh conditions faced by commercial vehicle chassis.
How long does it take for the paint to fully cure?
The paint is dust-dry in 15-30 minutes. However, it requires a full cure, which typically takes 7-8 days under standard conditions, before the chassis is subjected to heavy use.
Can this paint be used on plastic parts of the chassis?
No, this coating is specifically formulated for metal surfaces like steel, galvanised steel, and aluminium. It is not recommended for use on plastic components.
What surfaces does this chassis paint adhere to?
It offers strong adhesion to steel, galvanised steel, and aluminium surfaces.
Is this product heat resistant?
Yes, it is heat resistant and can withstand short-term exposure up to 180°C, making it suitable for areas near heat sources like exhaust systems.
What is the finish of the FabioT. RT 2K PU265 HS Chassis Topcoat?
The coating provides a semi-gloss finish, offering a professional and decorative appearance.
How should I prepare the surface before applying?
The surface must be clean, dry, and free from rust, grease, oil, and loose paint. Lightly abrade bare metal for optimal adhesion. Ensure existing coatings are sound and prepped.
Troubleshooting
Uneven spray pattern or sputtering
Ensure the can is adequately shaken. Check the nozzle for blockages; if blocked, clear it or use a new can.
Poor adhesion or peeling
Surface was not properly prepared (e.g., not clean, oily, or rusty). Ensure thorough cleaning and degreasing before application.
Runs or sags in the coating
Applied too thickly or too close to the surface. Apply in thinner, even coats and maintain consistent distance.
Coating remains tacky after extended drying
Application occurred in humid or cold conditions, or the coat was applied too heavily. Ensure application within recommended temperature and humidity ranges and apply in thin coats.
Pros and Cons
Pros
- Provides excellent long-term protection for vehicle chassis.
- Offers superior resistance to corrosion, UV, and solvents.
- Suitable for a variety of metal surfaces.
- Fast drying time minimizes application downtime.
- Withstands high temperatures encountered in automotive use.
Cons
- Requires careful preparation and application for optimal results.
- Full cure takes several days, requiring patience before heavy use.
- Aerosol format may be less economical for very large applications compared to bulk options.
Setup, Compatibility & Care
Preparation: Ensure the surface to be coated is clean, dry, and free from rust, grease, oil, and old, loose paint. For best adhesion, lightly abrade bare metal surfaces. If painting over existing coatings, ensure they are sound and properly prepared.
Application: Shake the aerosol can vigorously for at least two minutes before use. Apply in thin, even coats. Maintain an application distance of approximately 15-25 cm. Recommended application methods include electrostatic, Airmix, Airless, and brush, though the 400ml aerosol is designed for direct spray application. Work in a well-ventilated area.
Compatibility: Bonds well to steel, galvanised steel, and aluminium. Not recommended for use on plastic components.
Care: Once fully cured, the coating is durable and requires minimal specific care beyond routine vehicle washing. Avoid abrasive cleaners or high-pressure washing directly on the coated surface for extended periods.