Ft Paints Chassis Paint Kit - 2750ml - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and serious DIYers working on truck and commercial vehicle chassis. The key benefit is superior, long-lasting protection against corrosion and the elements with a durable semi-gloss finish. A caveat to consider is that this is a 2K (two-component) system requiring careful mixing and application. The Ft Paints RT 2K PU265 HS Chassis Topcoat is a high-build polyurethane acrylic coating formulated for heavy-duty protection. It is reinforced with zinc phosphate for active corrosion protection and offers outstanding weather, UV, and solvent resistance. The 2.75L kit includes paint, hardener, and thinner for a complete solution.
All features
| Colour | Silver |
|---|---|
| Model Part Number | FT-PU265-P1.90L-H0.48L-T0.37L-SG-UC |
| Brand | FT Paints |
| Container Volume | 2750ml |
Extended Product Information
FAQs
What is the mix ratio for the 2.75L kit?
The exact mix ratio for paint, hardener, and thinner must be obtained from the product's technical data sheet, as it can vary based on application conditions. Always refer to the official documentation.
How long does it take to fully cure?
Under standard conditions (e.g., 20°C and 50% relative humidity), the coating will achieve a full cure in approximately 7-8 days. Curing time can be affected by temperature and humidity.
Can this product be applied with a brush?
Yes, the Ft Paints RT 2K PU265 HS Chassis Topcoat is suitable for brush application, alongside electrostatic, Airmix, and Airless methods.
What is the shelf life of the product?
Unopened components typically have a shelf life of at least one year when stored correctly. Once mixed, the pot life is limited and varies; refer to the technical data sheet.
Is this paint suitable for use on car bodies?
While it provides excellent protection, this product is specifically formulated as a chassis topcoat for heavy-duty trucks and commercial vehicles. For car bodies, other specialized automotive paints would be more appropriate.
How resistant is the coating to chemicals?
The coating offers outstanding resistance to solvents and various chemicals due to its polyurethane acrylic formulation. Specific chemical resistance data should be consulted from the manufacturer's technical documentation.
Can I apply this in cold weather?
Application is best performed within the recommended temperature range specified by the manufacturer. Applying in very cold conditions can negatively impact drying, curing, and final film properties.
Troubleshooting
Coating is too thick or difficult to apply
Ensure correct thinner is used and added in the recommended proportion. Ambient temperature may affect viscosity; adjust thinner if necessary within recommended limits.
Poor adhesion to the surface
Verify surface preparation was adequate. Ensure the substrate was clean, dry, and free from contaminants like oil, grease, or rust. Check compatibility with the primer used.
Uneven finish or 'orange peel' effect
Adjust spray gun settings (pressure, fan pattern, fluid tip) and application technique (distance, speed). Ensure proper mixing and viscosity. Avoid applying in adverse temperature or humidity conditions.
Coating remains soft or tacky after application
Confirm correct hardener ratio was used and thoroughly mixed. Check environmental conditions (temperature, humidity) during application and curing. Insufficient hardener or improper curing conditions will prevent full cure.
Runs or drips appear on the surface
Apply thinner coats rather than one heavy coat. Reduce fluid delivery or increase spray gun speed. Maintain a consistent application distance.
Pros and Cons
Pros
- Provides robust, long-lasting protection for heavy-duty chassis.
- Excellent resistance to environmental factors like UV, weather, and solvents.
- Active corrosion prevention due to zinc phosphate content.
- Suitable for a wide range of application methods.
- Achieves a professional semi-gloss finish.
Cons
- Requires a 2K mixing process, necessitating precision.
- May require specialized application equipment for optimal results.
- Full cure takes 7-8 days, requiring patience before heavy use.
- Specific thinner is included, limiting immediate use if thinner is depleted.
- Not suitable for all surfaces without proper preparation.
Setup, Compatibility & Care
Setup:
This is a 2K (two-component) product. Proper mixing is crucial for performance.
- Ensure you have the correct ratio of paint, hardener, and thinner as specified in the product's technical data sheet (typically provided with the kit or available from the manufacturer).
- Use appropriate mixing containers and tools.
- Mix thoroughly until a homogenous mixture is achieved. Avoid over-mixing, which can introduce air.
- Allow for a brief induction period (sweat-in time) as recommended by the manufacturer before application.
Compatibility:
- Substrates: Bonds well to properly prepared steel, galvanised steel, and aluminium.
- Primers: Compatible with appropriate primers for metal surfaces. Always consult the manufacturer's recommendations for compatible primer systems.
Care and Maintenance:
- Cleaning: Clean applied surfaces with mild detergents and water. Avoid abrasive cleaners or solvents that could damage the coating.
- Inspection: Regularly inspect the chassis for any signs of damage or wear and address them promptly to maintain protective integrity.
- Storage: Store unused components in tightly sealed original containers in a cool, dry, well-ventilated area, away from direct sunlight and heat sources. Follow manufacturer guidelines for shelf life.