FabioT. FT Paints 5.50 L Kit Chassis Paint - Semi Gloss Finish - Galvanised Steel - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This FabioT. 5.50L kit is designed for professionals and serious DIYers seeking robust protection for truck and commercial vehicle chassis. Its key benefit is a high-build polyurethane acrylic formula that provides durable, corrosion-resistant, and weather-proof finishing. A caveat to consider is the need for proper ventilation and personal protective equipment due to its industrial nature.
All features
| Colour | Silver |
|---|---|
| Model Part Number | FT-PU265-P3.81L-H0.95L-T0.74L-S-GS |
| Brand | FT Paints |
| Container Volume | 5500ml |
Extended Product Information
FAQs
What is the shelf life of the mixed product?
The pot life of the mixed product is limited and varies depending on temperature. Refer to the product's technical data sheet for specific pot life information. It is best to mix only what can be used within the specified pot life.
Can this paint be used on other metal surfaces besides chassis?
While formulated for chassis, its properties like corrosion resistance, adhesion, and durability make it suitable for other heavy-duty metal applications that require similar protection. Always test on a small, inconspicuous area first.
How much thinner should I use?
The amount of thinner depends on the application method and ambient conditions. A general guideline is provided in the product description, but refer to the technical data sheet for precise recommendations for electrostatic, Airmix, Airless, or brush applications.
Is this paint safe for use in enclosed spaces?
This is a professional-grade coating. Ensure adequate ventilation during application and curing. Use appropriate personal protective equipment (PPE), including a respirator rated for organic vapors.
What is the expected coverage rate?
Coverage rates vary based on the application thickness and method. For specific coverage details, consult the product's technical data sheet.
How long should I wait before the chassis can be exposed to harsh weather?
While dust-dry in 15-30 minutes, the paint achieves full cure in 7-8 days. It is recommended to avoid heavy exposure to harsh weather or demanding use until the full cure is achieved for maximum durability.
Can I recoat the chassis paint?
Yes, recoating is possible. Ensure the surface is clean and properly prepared. For subsequent coats of the same product, refer to the recoat times specified in the technical data sheet.
Troubleshooting
Coating is not drying properly or remains tacky
Ensure the correct hardener and thinner ratios were used. Verify ambient temperature and humidity are within recommended application ranges. Check for insufficient mixing or application of too thick a coat.
Poor adhesion to the substrate
The surface may not have been properly prepared. Ensure it was clean, dry, and free from grease, rust, or old coatings. Re-prepare the surface and reapply.
Uneven finish or brush marks
If brushing, use a high-quality brush suitable for paints. Apply with even strokes and avoid overworking the paint. If spraying, ensure correct pressure, nozzle size, and spray pattern are used. Consider a different application method if issues persist.
Orange peel effect during spraying
Adjust spray pressure, tip size, and spraying distance. Ensure the paint viscosity is correct for the application method by using the recommended thinner.
Pros and Cons
Pros
- Offers superior protection against corrosion and weather elements.
- Durable high-build formula ensures longevity on heavy-duty vehicles.
- Excellent adhesion to common chassis materials.
- Fast drying time increases application efficiency.
- Professional semi-gloss finish enhances appearance.
- Resistant to UV, solvents, and moderate heat.
Cons
- Requires a two-component mixing process (paint, hardener, thinner).
- Full cure takes 7-8 days, necessitating patience before full use.
- Application may require specialized equipment and safety precautions.
- Not suitable for food-contact surfaces.
- Availability of specific thinner may be required based on application method.
Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and free from contaminants. Prepare surfaces by degreasing and abrading or sandblasting as appropriate.
- Mix the components according to the product's specific ratio: 3.81L Paint, 0.95L Hardener, and 0.74L Thinner. Stir thoroughly until uniform.
- Allow the mixture to 'induction' or 'sweat-in' for the time specified by the manufacturer (refer to technical data sheet).
- Apply using a suitable method (electrostatic, Airmix, Airless, or brush).
Compatibility:
- Suitable for application over steel, galvanised steel, and aluminium.
- Primarily designed for truck and commercial vehicle chassis.
- Ensure any existing coatings are compatible or properly prepared.
Care:
- Clean application equipment immediately after use with appropriate thinners.
- Store in a cool, dry place away from direct sunlight and sources of ignition.
- Keep containers tightly sealed when not in use.
- Avoid harsh chemical cleaners on the cured finish unless compatibility is confirmed.