Ft Paints Chassis Paint - 1100ml - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for vehicle owners and professionals needing robust protection for truck and commercial vehicle chassis. The key benefit is superior, long-lasting defense against corrosion and environmental wear with a professional semi-gloss finish. A caveat is the need for proper ventilation and personal protective equipment due to its chemical composition. The Ft Paints 2K PU265 HS Chassis Topcoat is a high-build polyurethane acrylic coating designed for heavy-duty applications, offering excellent durability, weather resistance, and active corrosion protection.
All features
| Colour | Silver |
|---|---|
| Model Part Number | FT-PU265-P0.76L-H0.19L-T0.15L-S-AL |
| Brand | FT Paints |
| Container Volume | 1100ml |
Extended Product Information
FAQs
What is the shelf life of the mixed product?
The pot life of the mixed product is limited. Once mixed with the hardener, it should be used within the recommended time frame, typically a few hours, as specified by the manufacturer's technical data sheet. Unmixed components should be stored in a cool, dry place.
Can this be applied over existing paint?
Yes, it can be applied over existing, well-adhered paint finishes after proper surface preparation, including scuff sanding and cleaning. For best results and maximum durability, apply over a compatible primer.
How much area does the 1.10L kit cover?
Coverage varies depending on the application method and the surface porosity. A general guideline for high-build coatings is approximately 8-10 square meters per litre per coat. Refer to the product's technical data sheet for precise coverage estimates.
Is this product suitable for interior applications?
While the product offers excellent durability, it is specifically formulated for heavy-duty chassis protection and may not be ideal for interior applications where VOCs and specific finish requirements are different. Always ensure adequate ventilation if used in enclosed spaces.
What temperature is recommended for application?
Application is recommended within a temperature range of 5°C to 30°C. Avoid applying in direct sunlight or when temperatures are expected to drop below 5°C during the drying and curing process.
How do I clean application equipment?
Clean spray guns, brushes, and other equipment immediately after use with a suitable solvent, such as lacquer thinner or the thinner included in the kit, as recommended by the manufacturer.
Does the silver colour offer any specific advantages?
The silver colour provides a clean, professional look and can help reflect some heat. Its primary function, along with the other colours, is to provide durable protection.
Troubleshooting
Coating is too thick or difficult to apply.
Ensure correct mixing ratios are followed. The included thinner may be insufficient for certain application methods or environmental conditions; consult the technical data sheet for recommended thinner types and amounts.
Poor adhesion to the surface.
The surface may not have been adequately prepared. Re-clean and degrease the surface, and ensure all previous coatings or rust have been removed. Consider using a suitable primer recommended for the substrate.
Uneven finish or brush marks are visible.
For brush application, use a high-quality brush and apply thin, even coats. Ensure the paint has not started to set. For spray application, maintain a consistent distance and speed. Proper thinning can also improve flow.
Coating remains tacky after extended drying time.
This could be due to incorrect mixing ratios, insufficient ventilation, high humidity, or low temperatures. Ensure the hardener is fully reactive and mixed thoroughly. Improve ventilation and ensure the application environment is within the recommended temperature and humidity range.
Pros and Cons
Pros
- Provides excellent, long-lasting protection against rust and corrosion.
- Durable finish resists UV, weathering, and solvents.
- Suitable for a variety of application methods.
- Withstands high temperatures for demanding use.
- Achieves a professional semi-gloss appearance.
Cons
- Requires careful handling and appropriate safety equipment.
- Fast drying time can reduce application window if not managed.
- Full cure takes over a week, requiring patience before heavy use.
- Not suitable for all surfaces; primer may be needed for some materials.
- Kit includes thinner, but application specific thinner requirements may vary.
Setup, Compatibility & Care
Setup: This product is a kit containing paint, hardener, and thinner. Ensure components are mixed in the correct ratio as per the manufacturer's instructions. Proper ventilation is critical during mixing and application. Use appropriate personal protective equipment, including gloves, eye protection, and a respirator.
Compatibility: The topcoat is designed to adhere strongly to prepared surfaces of steel, galvanised steel, and aluminium. Ensure surfaces are clean, dry, and free from contaminants like grease, oil, or rust before application. A suitable primer may be required for optimal adhesion on certain substrates or for maximum corrosion protection.
Care: Once fully cured, the surface is durable and requires minimal care beyond regular cleaning. Use mild detergents and water for cleaning. Avoid abrasive cleaners or solvents that could damage the finish. Inspect periodically for any signs of wear or damage and address them promptly to maintain protection.