Ft Paints Chassis Paint Kit - Silver - 5500ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Ft Paints Chassis Paint Kit in Silver (5.50L) is designed for vehicle owners and professional mechanics seeking durable, high-build protection for truck and commercial vehicle chassis. Its key benefit is robust corrosion and weather resistance, ensuring longevity in demanding conditions. A minor caveat is the need for proper ventilation and protective gear during application due to its industrial formulation. The kit includes paint, hardener, and thinner, providing a comprehensive solution for a professional, semi-gloss finish.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 2K PU265 |
| Brand | FT Paints |
| Container Volume | 5500 |
Extended Product Information
FAQs
What is the shelf life of the mixed paint?
The pot life (working time) of the mixed 2K paint is typically limited. Once the hardener is added, it must be used within a specified timeframe, usually around 4-6 hours, depending on temperature. Refer to the product's technical data sheet for precise information.
Can this paint be applied with a brush?
Yes, the product description states it is suitable for brush application, alongside electrostatic, Airmix, and Airless methods. However, using a brush may result in a less uniform finish compared to spray application.
How long does it take for the chassis paint to fully cure?
Under standard conditions, the paint achieves a full cure in approximately 7-8 days. While it dries to the touch much faster (dust-dry in 15-30 minutes), it's advisable to avoid heavy use or exposure to harsh conditions until the full cure is achieved.
Is primer required before applying this topcoat?
While the paint offers strong adhesion to bare metal, proper surface preparation is crucial. For best results and maximum protection, it is generally recommended to use a compatible primer suitable for metal chassis applications, especially on previously painted or slightly corroded surfaces.
What safety precautions should I take when using this product?
Always use in a well-ventilated area. Wear appropriate personal protective equipment, including a respirator with organic vapor cartridges, chemical-resistant gloves, and eye protection. Consult the Safety Data Sheet (SDS) for detailed safety information.
What is the coverage rate of this kit?
Coverage rates vary based on application method and surface porosity. A general guideline for high-build coatings is typically around 8-10 square meters per liter at the recommended dry film thickness. For the 5.50L kit, this would equate to a significant area, but precise figures depend on the specific application.
Troubleshooting
Paint not drying or curing properly
Ensure the correct ratio of paint, hardener, and thinner was used. Verify that the ambient temperature and humidity are within the recommended application range. Insufficient mixing can also be a cause.
Poor adhesion to the surface
The surface may not have been adequately prepared. Ensure it was clean, dry, and free from contaminants like oil, grease, or rust. A suitable primer may be necessary for optimal adhesion.
Uneven finish or runs
This is often due to incorrect application technique, such as spraying too close to the surface, moving too slowly, or applying too much material at once. Adjust spray gun settings, distance, and speed for a smoother finish.
Coating appears dull or lacks gloss
Check if the paint, hardener, or thinner was mixed correctly. Temperature and humidity can also affect gloss levels. Ensure the product was applied within its recommended pot life and drying conditions.
Pros and Cons
Pros
- Provides excellent, long-lasting protection against corrosion and weathering.
- Durable high-build formula suitable for demanding commercial vehicle applications.
- Offers a professional semi-gloss finish that enhances appearance.
- Strong adhesion to common chassis materials ensures a reliable coating.
- Fast drying allows for efficient project completion.
Cons
- Requires proper ventilation and personal protective equipment due to its formulation.
- Full cure takes several days, limiting immediate heavy use.
- Application may require specific spraying equipment for best results.
Setup, Compatibility & Care
Setup: This kit contains paint, hardener, and thinner. Ensure all components are mixed in the correct ratio as specified by the manufacturer's technical data sheet before application. Proper surface preparation, including cleaning and priming, is essential for optimal adhesion and performance.
Compatibility: The RT 2K PU265 HS Chassis Topcoat is designed to bond effectively with steel, galvanized steel, and aluminum surfaces. It is a two-component (2K) system, meaning the hardener must be mixed with the base coat for proper curing.
Care: For long-term durability, clean the coated chassis periodically with mild detergents and water. Avoid abrasive cleaners or high-pressure washing directly on the coated surface, which could damage the finish. Inspect for any chips or scratches and touch up promptly to prevent corrosion.