FabioT. FT Paints 5.50 L Kit Chassis Paint - Satin Gloss Finish - Aluminium - Ral 9011-Graphite Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 5.50L kit of FabioT. FT Paints 2K PU265 HS Chassis Topcoat is designed for professionals and serious DIYers seeking robust protection for truck and commercial vehicle chassis. Its key benefit is offering high-build, durable protection with excellent corrosion and weather resistance, leading to a long-lasting professional finish. A potential caveat is the need for proper ventilation and protective equipment due to its chemical composition and application process.
All features
| Colour | Black |
|---|---|
| Model Part Number | FT-PU265-P3.81L-H0.95L-T0.74L-SG-AL |
| Brand | FabioT. |
| Container Volume | 5500 |
Extended Product Information
FAQs
What is the mixing ratio for the 2K PU265 HS Chassis Topcoat?
The exact mixing ratio for paint, hardener, and thinner will be detailed in the product's technical data sheet. It is critical to follow these precise instructions for proper curing and performance. Generally, 2K systems require specific volume or weight ratios.
How long does it take for the chassis paint to fully cure?
The paint achieves a dust-dry state in 15-30 minutes. However, a full cure, meaning the coating reaches its maximum hardness and chemical resistance, typically takes 7-8 days under standard conditions.
Can this paint be applied in cold weather?
Application temperatures significantly affect drying and curing. It is recommended to apply this coating within a specific temperature range, usually between 10°C and 30°C. Refer to the technical data sheet for precise temperature guidelines and potential adjustments for cold weather application.
What type of thinner should be used?
Use only the recommended thinner specified by FabioT. FT Paints for the 2K PU265 HS product line. Using an incorrect thinner can affect performance, drying, and finish quality.
Is this product suitable for interior chassis components?
Yes, its robust protection and resistance properties make it suitable for interior chassis components that require durable coating against wear and tear, though its primary design is for heavy-duty exterior protection.
What safety precautions are necessary?
Always use in a well-ventilated area. Wear appropriate personal protective equipment (PPE), including chemical-resistant gloves, eye protection, and a respirator approved for organic vapors and particulates. Consult the Safety Data Sheet (SDS) for comprehensive safety information.
Can I apply this over existing paint?
This product is designed for application on prepared bare metal (steel, galvanised steel, aluminium). Applying over existing paint requires careful assessment. If the existing coating is sound and well-adhered, it may be suitable after appropriate surface preparation (e.g., scuff sanding, cleaning). If the existing paint is peeling, damaged, or incompatible, it must be removed.
Troubleshooting
Coating is too thick or difficult to apply
Ensure the paint and hardener are mixed thoroughly. Add the recommended amount of thinner if required for your application method. Check ambient temperature as it can affect viscosity.
Poor adhesion to the surface
Verify that the surface was properly prepared, degreased, and free from contaminants. Ensure the correct adhesion to steel, galvanised steel, or aluminium was achieved. Re-prep the surface if necessary.
Runs or sags in the coating
Application is likely too thick or too much thinner was used. Apply thinner, more even coats. Reduce spray gun distance or pressure. Allow sufficient flash-off time between coats.
Uneven finish or texture
Ensure consistent application technique. Check spray equipment settings (pressure, nozzle size) and adjust as needed. Stir the product frequently during application.
Pros and Cons
Pros
- Provides robust, long-lasting protection for vehicle chassis.
- Excellent resistance to corrosion, UV, and solvents.
- Achieves a professional semi-gloss finish.
- Good adhesion to multiple metal substrates.
- Suitable for various application methods.
Cons
- Requires proper safety equipment and ventilation.
- Full cure takes 7-8 days, requiring patience.
- Not suitable for application on non-metal surfaces without proper priming.
- Application may require specialized equipment for optimal results.
Setup, Compatibility & Care Instructions
Setup: This is a 2K (two-component) system. The kit includes 3.81L of paint, 0.95L of hardener, and 0.74L of thinner. It is crucial to mix the paint and hardener at the correct ratio specified by the manufacturer before application. Use the provided thinner if thinning is required for your application method, adhering strictly to recommended percentages.
Compatibility: The coating exhibits strong adhesion to clean, bare steel, galvanised steel, and aluminium surfaces. Ensure all surfaces are free from grease, oil, rust, and existing loose coatings. Proper surface preparation, including degreasing and abrasion, is essential for optimal adhesion. It is not intended for direct application on plastics or non-ferrous metals without appropriate primers.
Care: To maintain the protective qualities and appearance of the chassis, regular cleaning with mild detergents and water is recommended. Avoid using harsh solvents or abrasive cleaners that could compromise the coating. Inspect the chassis periodically for any signs of damage and touch up as needed using the same product and preparation methods.