Ft Paints Chassis Paint - 400ml - Blue
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for owners and maintainers of commercial vehicles and trucks needing a durable, protective coating for chassis components. The key benefit is superior corrosion and weather resistance, ensuring longevity. A caveat is that professional application may be required for optimal results with certain application methods. The FT Paints RT 2K PU265 HS Chassis Topcoat is a high-build polyurethane acrylic coating offering heavy-duty protection, a semi-gloss finish, and excellent adhesion. It provides active corrosion protection, resists UV rays and solvents, and can withstand high temperatures.
All features
| Colour | Blue |
|---|---|
| Model Part Number | FT-PU265-400AER-S-UC |
| Brand | FT Paints |
| Container Volume | 400ml |
Extended Product Information
FAQs
What is the best way to prepare the surface before applying the topcoat?
The surface must be clean, dry, and free from grease, oil, and loose rust. For optimal adhesion, lightly abrade the surface before application.
How long does it take for the coating to fully cure?
Under standard conditions, the coating will be dust-dry in 15-30 minutes, but it achieves full cure in approximately 7-8 days.
Can this topcoat be used on surfaces other than vehicle chassis?
While formulated for heavy-duty chassis protection, its properties of durability and resistance may make it suitable for other metal applications requiring similar protection, provided compatibility is confirmed.
What is the recommended spraying distance for the aerosol can?
The recommended spraying distance is typically between 20-30 cm (8-12 inches) to ensure an even coat and prevent runs.
How should I store the unused aerosol can?
Store aerosol cans in a cool, dry place away from direct sunlight and heat sources. Ensure the cap is securely fitted after use.
What is the heat resistance rating of this topcoat?
The coating can withstand short-term exposure to temperatures up to 180°C.
Does the zinc phosphate provide active corrosion protection?
Yes, the coating is reinforced with zinc phosphate, which provides active corrosion protection to help prevent rust formation.
Troubleshooting
Uneven spray pattern or poor coverage
Ensure the aerosol can is held at the correct distance from the surface (typically 20-30 cm). Shake the can frequently during use. Check that the nozzle is not clogged; if so, clean it according to manufacturer instructions or replace the can.
Coating runs or sags
This usually indicates the paint is being applied too thickly or too close to the surface. Apply in thin, even coats, allowing adequate drying time between them. Maintain a consistent spraying distance.
Poor adhesion or peeling
The surface was likely not properly prepared. Ensure the substrate is clean, dry, and free from contaminants like oil or grease. Abrading the surface before application can significantly improve adhesion.
Aerosol can not spraying
Check that the nozzle is not blocked. If it is, try clearing it with a solvent and a fine needle. Ensure the can is at room temperature and has been shaken vigorously. If the issue persists, the can may be faulty.
Pros and Cons
Pros
- Provides robust protection against corrosion and environmental damage.
- Offers a professional, semi-gloss finish for improved aesthetics.
- Fast drying times reduce the duration of vehicle downtime.
- Versatile application methods cater to different user needs and equipment.
- Excellent adhesion to various metal surfaces.
- Resistant to UV, solvents, and high temperatures.
Cons
- Aerosol format may not be suitable for very large or complex applications without multiple cans.
- Requires proper surface preparation for optimal adhesion and performance.
- Full cure time of 7-8 days means the surface remains vulnerable to damage until fully hardened.
- Not ideal for extremely high-temperature continuous exposure.
- Potential for overspray and need for masking when using aerosol.
Setup, Compatibility & Care
Setup:
Ensure the surface to be coated is clean, dry, and free from grease, oil, and loose rust. For best results, lightly abrade surfaces before application. Shake the aerosol can vigorously for at least two minutes after the mixing ball is heard. Test spray on a small, inconspicuous area first.
Compatibility:
This topcoat is designed to adhere well to steel, galvanized steel, and aluminium. It can be applied over appropriate primers or directly to properly prepared bare metal surfaces. It is suitable for use with electrostatic, Airmix, Airless, and brush application methods.
Care:
Once fully cured, the coating is durable and requires minimal special care. Regular cleaning with mild detergents and water is sufficient. Avoid harsh abrasive cleaners or solvents that could degrade the finish. Inspect periodically for any signs of damage and touch up as needed.