Ft Paints Chassis Paint - 2750ml - Ultramarine Blue
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Ft Paints RT 2K PU265 HS Chassis Topcoat is designed for professionals and serious DIYers needing durable, high-performance protection for truck and commercial vehicle chassis. Its key benefit is superior corrosion and weather resistance thanks to a zinc phosphate reinforcement and a tough polyurethane acrylic formula. A potential caveat is the need for proper ventilation and personal protective equipment due to its chemical composition and application methods.
All features
| Colour | Blue |
|---|---|
| Model Part Number | 2K PU265 HS |
| Brand | FT Paints |
| Container Volume | 2750 |
Extended Product Information
FAQs
What is the coverage rate of this chassis paint?
Coverage depends on the application method and substrate porosity, but typically a 2.75L kit can cover a significant portion of a commercial vehicle chassis. Refer to the product's technical data sheet for precise coverage estimations.
Can I use this paint on a painted surface?
Yes, provided the existing paint is sound, clean, and appropriately keyed (sanded). For best results, consult the product's technical data sheet for primer recommendations or surface preparation guidelines.
What is the shelf life of the mixed paint?
The pot life (working time) of the mixed paint is limited, typically ranging from 2-4 hours depending on temperature. Ensure you only mix what you can use within this timeframe.
How long should I wait between coats?
A general guideline is to wait until the previous coat is touch-dry or has flashed off sufficiently, typically 15-30 minutes, before applying the next coat. Consult the technical data sheet for specific recoat intervals.
Is this paint suitable for exterior exposed chassis parts?
Yes, its formulation provides outstanding resistance to UV rays and outdoor exposure, making it ideal for the exterior of truck and commercial vehicle chassis.
What type of thinner should I use?
Use a reputable polyurethane-grade thinner. The product information suggests a specific thinner is included in the kit, or a compatible one should be used as per the technical data sheet.
What PPE is required?
Always wear appropriate Personal Protective Equipment, including a solvent-resistant respirator, chemical-resistant gloves, eye protection (goggles or face shield), and protective clothing.
Troubleshooting
Paint not drying or curing properly
Ensure correct mixing ratio of paint and hardener. Verify ambient temperature and humidity are within recommended application range. Check for incompatible contaminants on the surface.
Poor adhesion or blistering
The surface may not have been adequately prepared (cleaned, degreased, or primed). Ensure the substrate is free of rust, oil, and moisture. Check that the paint was applied to a compatible surface.
Uneven finish or visible brush marks
If brushing, use a high-quality brush and apply thin, even coats. For spraying, adjust pressure, fluid tip, and spray distance. Ensure the paint is thinned to the correct viscosity for the application method.
Runs or sags in the finish
Coats may have been applied too thickly or the paint was thinned excessively. Reduce the amount of paint applied per coat and allow adequate flash-off time between coats if necessary.
Pros and Cons
Pros
- Offers superior corrosion and rust prevention.
- Provides long-lasting protection against weather and UV damage.
- Adheres well to various metal surfaces.
- Can withstand high temperatures.
- Multiple application methods are supported for flexibility.
Cons
- Requires careful handling and appropriate safety equipment.
- Fast drying time may require experienced application to avoid defects.
- A two-component system necessitates proper mixing ratios.
- Full cure takes up to 7-8 days, requiring patience before heavy use.
Setup, Compatibility & Care Instructions
Setup:
This is a two-component (2K) system. Ensure you have the paint, hardener, and thinner as provided in the kit. Mix the paint and hardener according to the manufacturer's specified ratio (typically 4:1 or 5:1 by volume, refer to product data sheet for exact figures). Add thinner to achieve the desired application viscosity, again following recommended guidelines. Proper mixing is crucial for performance and cure.
Compatibility:
This topcoat is designed to adhere strongly to properly prepared surfaces including:
- Steel
- Galvanised Steel
- Aluminium
Ensure surfaces are clean, dry, and free from contaminants like oil, grease, or existing loose paint. A suitable primer may be recommended for optimal adhesion and corrosion protection, especially on bare metal.
Care:
- Application: Use electrostatic, Airmix, Airless spray, or brush. Ensure adequate ventilation and wear appropriate Personal Protective Equipment (PPE), including respirator, gloves, and eye protection.
- Drying: The coating will be dust-dry in 15-30 minutes. Handle with care during the initial cure period.
- Full Cure: Allow 7-8 days for the coating to reach full hardness and chemical resistance under standard conditions (approx. 20°C and 50% relative humidity). Avoid heavy use or exposure to chemicals until fully cured.
- Cleaning: Clean application equipment immediately after use with a suitable solvent.