Ft Paints Chassis Paint - 2750ml - Blue
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for automotive professionals and DIY enthusiasts seeking a durable, high-build protective coating for truck and commercial vehicle chassis. The key benefit is robust, long-lasting protection against corrosion and environmental factors with a professional semi-gloss finish. A potential consideration is the need for specific application conditions and the 2K (two-component) nature requiring careful mixing.
All features
| Colour | Blue |
|---|---|
| Model Part Number | FT-PU265-P1.90L-H0.48L-T0.37L-SG-UC |
| Brand | FT Paints |
| Container Volume | 2750ml |
Extended Product Information
FAQs
What is the recommended mixing ratio for the 2.75L kit?
The 2.75L kit contains 1.90L of paint, 0.48L of hardener, and 0.37L of thinner. The approximate mixing ratio is 4 parts paint to 1 part hardener to 1 part thinner by volume. Always stir thoroughly after mixing.
How long does it take for the chassis paint to fully cure?
The paint is dust-dry in 15-30 minutes under standard conditions. However, a full cure, where the coating reaches its maximum hardness and durability, takes approximately 7-8 days.
Can this paint be applied directly to rust?
It is not recommended to apply directly to rust. The surface should be properly prepared, meaning rust should be removed and the surface cleaned and primed for optimal adhesion and corrosion protection.
What surfaces can this paint adhere to?
This paint offers strong adhesion to properly prepared surfaces of steel, galvanized steel, and aluminum.
What is the temperature resistance of this coating?
The coating can withstand short-term exposure to temperatures up to 180°C.
How should I clean my equipment after using this paint?
Application equipment should be cleaned immediately after use with an appropriate solvent to prevent the paint from drying and hardening in the lines or spray gun.
What is the sheen level of this paint?
This product provides a semi-gloss finish.
Troubleshooting
Paint not drying properly
Ensure the correct hardener ratio was used and thoroughly mixed. Check ambient temperature and humidity; application in excessively cold or humid conditions can affect drying times. Ensure the surface was clean and dry before application.
Poor adhesion to surface
The surface may not have been adequately prepared. Ensure it was clean, dry, and free from grease, rust, or old coatings. A suitable primer may be required for optimal adhesion on certain substrates like bare aluminum.
Uneven finish or sags
This can be due to over-application, incorrect spray gun settings, or improper mixing. Reduce the amount of paint applied per coat, adjust spray pressure and pattern, and ensure thorough mixing of components.
Brush marks visible
If applying by brush, ensure even strokes and a consistent application thickness. Consider using a high-quality brush and appropriate thinner for flow. For larger areas, spray application is recommended.
Pros and Cons
Pros
- Provides excellent, long-term protection for commercial vehicle chassis.
- Reinforced with zinc phosphate for superior corrosion resistance.
- Offers a professional semi-gloss finish with good coverage.
- Withstands harsh weather, UV exposure, and solvents.
- Suitable for application on various metal surfaces including steel and aluminum.
- Fast drying times improve application efficiency.
Cons
- Requires a 2K mixing process, necessitating careful ratio measurement.
- May require specific ventilation and personal protective equipment due to its formulation.
- Full cure takes 7-8 days, meaning the chassis will not be at maximum hardness immediately.
- The blue color may not be suitable for all aesthetic preferences or fleet color schemes.
Setup, Compatibility & Care
Setup: This is a two-component (2K) system. Ensure proper mixing of the paint (1.90L), hardener (0.48L), and thinner (0.37L) in the specified ratio (approximately 4:1:1 by volume) before application. Stir thoroughly. Use appropriate safety equipment, including a respirator, gloves, and eye protection, and ensure good ventilation.
Compatibility: Bonds well to properly prepared surfaces of steel, galvanized steel, and aluminum. Ensure surfaces are clean, dry, and free from grease, oil, and existing contaminants. For best results, apply over a suitable primer.
Care: Keep the container tightly sealed when not in use. Store in a cool, dry place away from direct sunlight and sources of ignition. Clean application equipment immediately after use with an appropriate solvent.