FabioT. FT Paints Chassis Paint Kit - 2750ml - Signal Yellow
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 2.75L kit of FabioT. FT Paints Chassis Paint in Signal Yellow is designed for professionals and enthusiasts needing durable, high-build protection for truck and commercial vehicle chassis. Its key benefit is superior corrosion and weather resistance thanks to zinc phosphate reinforcement and a tough polyurethane acrylic formula. A potential caveat is the need for proper ventilation and personal protective equipment due to its solvent-based nature. This kit includes paint, hardener, and thinner, offering a semi-gloss finish with excellent adhesion and heat resistance.
All features
| Colour | Yellow |
|---|---|
| Model Part Number | FT-PU265-P1.90L-H0.48L-T0.37L-SG-TC |
| Brand | FT Paints |
| Container Volume | 2750ml |
Extended Product Information
FAQs
What is the pot life of the mixed paint?
The pot life (working time) of the mixed 2K PU265 HS Chassis Topcoat will depend on ambient temperature but is typically around 2-3 hours. It is crucial to mix only what can be applied within this timeframe.
Can I apply this paint over existing paint?
Yes, if the existing paint is sound, well-adhered, and properly degreased and abraded. For best results and maximum durability, applying over a compatible primer or directly onto properly prepared bare metal is recommended.
How long does it take for the paint to fully cure?
The paint will be dust-dry in 15-30 minutes. However, it requires 7-8 days under standard conditions to achieve a full cure and maximum hardness and chemical resistance.
What thinner should I use with this product?
The 2.75L kit includes 0.37L of thinner. For thinning beyond the kit's included amount, use a compatible polyurethane thinner. Refer to the product's technical data sheet for specific recommendations.
Is this paint suitable for interior applications?
While primarily designed for chassis, its durable and resistant properties could make it suitable for certain industrial interior applications where heavy-duty protection is needed. However, ensure adequate ventilation during application and curing due to its solvent base.
What is the coverage rate of this paint?
The theoretical coverage rate for this high-build coating is approximately 8-10 square meters per liter at a dry film thickness of 50 microns. Actual coverage will vary based on application method, surface porosity, and film thickness.
Can I apply this paint with a brush?
Yes, the product is suitable for brush application. For best results with brushing, apply thin, even coats and avoid overworking the paint. Ensure the paint is adequately thinned if necessary for brushing application.
Troubleshooting
Paint not drying or curing properly
Ensure the hardener and paint were mixed in the correct ratio and thoroughly. Check that the ambient temperature and humidity are within the recommended application range. Verify that the correct hardener and thinner were used.
Poor adhesion to the surface
Re-evaluate surface preparation. Ensure the metal was clean, dry, and free from grease, oil, or rust before application. A compatible primer might be necessary for certain substrates or heavily corroded areas.
Uneven or rough finish
Adjust spray gun settings (pressure, fluid tip, fan pattern) or application technique. Ensure the paint mixture is not too thick. Avoid applying in windy conditions or at temperatures too low or too high.
Runs or sags in the paint film
Apply thinner coats rather than one heavy coat. Reduce spray gun distance or decrease fluid flow. Ensure application temperature is not too high, which can cause sagging.
Bubbling or blistering
This can be caused by moisture or solvents trapped beneath the paint film. Ensure adequate surface preparation and allow thinners to flash off between coats if necessary. Avoid applying in humid conditions.
Pros and Cons
Pros
- Provides excellent, long-lasting protection for vehicle chassis.
- Superior resistance to corrosion, UV, and solvents.
- High-build formula offers a robust protective layer.
- Good adhesion to common automotive metals.
- Fast drying time speeds up the application process.
- Suitable for various professional application methods.
Cons
- Requires proper ventilation and personal protective equipment (PPE).
- Two-component system requires accurate mixing of paint, hardener, and thinner.
- Specific cure time of 7-8 days may be longer than some users expect for full durability.
- Signal Yellow color may not be suitable for all aesthetic preferences.
- Not suitable for application on plastics or non-metal surfaces without proper priming.
Setup, Compatibility & Care
Setup:
- Preparation: Ensure the surface is clean, dry, and free from grease, oil, and existing loose paint or rust. Bare metal surfaces like steel, galvanized steel, or aluminum are ideal.
- Mixing: Carefully mix the paint, hardener, and thinner in the proportions specified by FabioT. Ensure thorough mixing to activate the two-component system. Use the provided 1.90L Paint, 0.48L Hardener, and 0.37L Thinner for the 2.75L kit.
- Application Environment: Apply in a well-ventilated area, preferably with temperature and humidity control, within the recommended application temperature range.
Compatibility:
- Primarily for: Truck and commercial vehicle chassis.
- Suitable Surfaces: Steel, galvanized steel, aluminum.
- Application Methods: Electrostatic, Airmix, Airless spray, brush.
- Not Recommended For: Plastic parts, flexible materials, or surfaces not intended for automotive coatings without appropriate surface preparation and primers.
Care:
- Cleaning: Clean tools and equipment immediately after use with appropriate thinners. The cured paint surface can be cleaned with mild detergents and water. Avoid abrasive cleaners or solvents that could damage the finish.
- Storage: Store unused mixed product immediately, as it has a limited pot life. Store unopened containers in a cool, dry place away from direct sunlight and ignition sources.