Ft Paints Chassis Paint - Black - 1100ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Ft Paints 2K PU265 HS Chassis Topcoat in Black is designed for professionals and serious DIYers seeking robust protection for truck and commercial vehicle chassis. Its key benefit is superior, long-lasting defense against corrosion and the elements, thanks to its high-build polyurethane acrylic formulation and zinc phosphate reinforcement. A potential caveat is the need for proper mixing and application of a two-part system, along with appropriate ventilation and personal protective equipment.
All features
| Colour | Black |
|---|---|
| Model Part Number | 2K PU265 HS |
| Brand | FT Paints |
| Container Volume | 1100 |
Extended Product Information
FAQs
What is the mix ratio for the 2K PU265 HS Chassis Topcoat?
The kit includes 0.76L Paint, 0.19L Hardener, and 0.15L Thinner for a total of 1.10L. The specific mix ratio is typically 4:1:0.75 (Paint:Hardener:Thinner). Always refer to the product data sheet for precise ratios and induction times.
What surfaces can I apply this paint to?
This topcoat is designed for robust adhesion to prepared steel, galvanised steel, and aluminium surfaces. Ensure the surfaces are properly cleaned and primed if necessary.
How long does it take to fully cure?
The paint achieves dust-dry in 15-30 minutes, but a full cure takes approximately 7-8 days, after which it will reach its maximum hardness and chemical resistance.
Can I apply this paint with a brush?
Yes, the Ft Paints 2K PU265 HS Chassis Topcoat is suitable for brush application, though care must be taken to achieve an even finish. Spray application methods are generally recommended for larger areas.
What is the temperature resistance of this paint?
This coating is heat resistant up to 180°C, making it suitable for applications where components may experience elevated temperatures.
Is this paint suitable for exterior use?
Yes, it offers outstanding weather and UV resistance, making it ideal for protecting vehicle chassis exposed to outdoor conditions.
How do I clean up after using this paint?
Clean all application tools and equipment immediately after use with a suitable solvent such as lacquer thinner or a dedicated 2K cleaner.
Troubleshooting
Paint is not curing or drying properly.
Ensure the correct ratio of paint, hardener, and thinner was used. Verify the ambient temperature is within the recommended range for application and curing. Check if the hardener has expired or been contaminated.
Poor adhesion to the substrate.
The surface was not properly prepared. Ensure it was clean, dry, and free from grease, oil, or rust. A suitable primer may be required for optimal adhesion depending on the substrate's condition.
Uneven finish or runs.
Improper application technique. Reduce spray pressure or flow rate, maintain a consistent distance from the surface, and avoid applying too much paint in one coat. For brush application, use light, even strokes.
Bubbling or blistering.
This can occur if moisture is present on the surface during application, or if applied too thickly, trapping solvents. Ensure the substrate is completely dry and apply thin, even coats.
Pros and Cons
Pros
- Excellent corrosion and rust prevention.
- Durable and long-lasting finish.
- Resistant to UV, weather, and chemicals.
- Good adhesion to various metal substrates.
- Fast drying time reduces project downtime.
- High heat resistance suitable for demanding environments.
Cons
- Requires proper mixing of paint and hardener.
- May require specialized application equipment for best results.
- Needs adequate ventilation and personal protective equipment during use.
- Full cure time is several days.
- Limited to semi-gloss finish.
Setup, Compatibility & Care
Setup: This is a two-part system requiring mixing of the paint, hardener, and thinner in the specified ratios before application. Ensure all components are at room temperature. Use a clean mixing pot and stir thoroughly. Allow for a brief induction period if recommended by the manufacturer (check specific product documentation for exact times).
Compatibility: The 2K PU265 HS Chassis Topcoat is designed for direct application onto prepared steel, galvanised steel, and aluminium surfaces. Ensure surfaces are clean, dry, and free from grease, oil, and existing rust or paint that is not well-adhered. It can be applied over appropriate primers. Avoid application on plastics or non-metallic surfaces.
Care: Clean application equipment immediately after use with a suitable solvent. For the coated chassis, regular washing with water and mild detergents is sufficient. Avoid abrasive cleaners or high-pressure washing directly onto the painted surface for extended periods, as this could compromise the coating's integrity over time. Store unopened tins in a cool, dry place away from direct sunlight.