FabioT. FT Paints 5.50 L Kit Chassis Paint - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. 2K PU265 HS Chassis Topcoat is designed for professionals seeking a durable, high-build protective coating for truck and commercial vehicle chassis. Its key benefit is robust protection against corrosion and environmental factors, delivered in a semi-gloss black finish. A minor caveat is the need for proper ventilation and personal protective equipment due to its chemical composition.
All features
| Colour | Black |
|---|---|
| Model Part Number | 2K PU265 HS |
| Brand | FabioT. |
| Container Volume | 5500ml |
Extended Product Information
FAQs
What is the recommended application temperature?
Consult the product's technical data sheet for specific temperature and humidity guidelines, as optimal conditions are crucial for performance.
How long does it take for the chassis paint to fully cure?
The paint dries dust-free in 15-30 minutes, but a full cure, reaching maximum hardness and chemical resistance, typically takes 7-8 days.
Can this paint be applied over existing coatings?
Yes, it can be applied over properly prepared existing coatings. Ensure the old coating is sound and thoroughly cleaned and degreased. A test patch is recommended.
What is the shelf life of the product?
Unmixed components generally have a shelf life of 1-2 years when stored correctly in sealed containers. Refer to the product packaging for exact expiration dates.
Is this product suitable for automotive topcoats (bodywork)?
No, this product is specifically formulated as a chassis topcoat for heavy-duty protection. It is not intended for automotive bodywork or exterior finishing where aesthetic standards are higher.
What thinner should be used?
The kit typically includes a compatible thinner. If additional thinner is needed, use a high-quality polyurethane-grade thinner recommended for 2K systems.
Can I use this on galvanized steel?
Yes, the product bonds reliably to galvanized steel surfaces when properly prepared.
Troubleshooting
Product not mixing correctly
Double-check the mixing ratios for paint, hardener, and thinner. Ensure both components are at the recommended temperature before mixing.
Poor adhesion to surface
Verify that the surface was thoroughly cleaned, degreased, and free from any contaminants or existing coatings that were not properly prepared. Ensure the substrate is suitable (steel, galvanized steel, aluminum).
Uneven finish or runs
Adjust application technique, spray pattern, or pressure. Ensure correct viscosity for the chosen application method. Avoid applying too much material in one pass.
Slow drying time
Ensure application conditions are within the recommended temperature and humidity range. Thicker coats may take longer to dry; consider reducing coat thickness or applying a thinner second coat.
Pros and Cons
Pros
- Offers superior corrosion resistance with zinc phosphate.
- Provides excellent durability and protection against weather and solvents.
- Fast drying times increase application efficiency.
- Suitable for a wide range of vehicle chassis materials.
- Versatile application methods cater to different user needs.
Cons
- Requires proper ventilation and PPE due to its chemical nature.
- Full cure takes 7-8 days, requiring patience before full use.
- A specific kit bundle is provided, limiting initial color choice.
- High-build nature may require specific application techniques to avoid runs.
Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and free from grease, rust, and old paint.
- Mix the 2K PU265 HS components according to the manufacturer's instructions, typically a specific ratio of paint, hardener, and thinner.
- Use appropriate application equipment (electrostatic, Airmix, Airless, or brush).
- Apply in a well-ventilated area, wearing recommended personal protective equipment (gloves, respirator, eye protection).
Compatibility:
- Suitable for application on steel, galvanized steel, and aluminum surfaces.
- Ensure surfaces are properly prepared for optimal adhesion.
Care:
- Clean application tools immediately after use with a suitable solvent.
- Store unused product in a cool, dry place, away from direct sunlight and sources of ignition.
- Avoid exposing the coated surface to harsh chemicals or abrasive cleaning until fully cured.