FabioT. FT Paints Chassis Paint - 5.50 L Kit - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 5.50L kit of FabioT. FT Paints 2K PU265 HS Chassis Topcoat in White is designed for professionals and serious DIYers seeking robust protection for truck and commercial vehicle chassis. Its key benefit is superior durability and active corrosion resistance, offering a professional semi-gloss finish. A potential caveat is the need for proper ventilation and protective equipment due to its 2K formulation.
All features
| Colour | White |
|---|---|
| Model Part Number | 2K PU265 |
| Brand | FT Paints |
| Container Volume | 5500ml |
Extended Product Information
FAQs
What is the mixing ratio for this 2K paint kit?
The kit contains 3.81L paint, 0.95L hardener, and 0.74L thinner. Always refer to the product's technical data sheet for the precise mixing ratio and any induction times.
How long does it take for the paint to fully cure?
The paint achieves dust-dry in 15-30 minutes, but a full cure, meaning it reaches its maximum hardness and durability, typically takes 7-8 days under standard conditions.
Can this paint be applied with a brush?
Yes, this coating is suitable for brush application, along with electrostatic, Airmix, and Airless methods.
What surfaces can I apply this chassis paint to?
The paint offers strong adhesion to steel, galvanized steel, and aluminum surfaces.
Is this paint suitable for areas that get hot?
Yes, it is heat resistant and can withstand short-term exposure up to 180°C, making it suitable for components near high-heat areas.
What is the main benefit of the zinc phosphate in this paint?
Zinc phosphate provides active corrosion protection, meaning it helps to prevent rust and protect the underlying metal from degradation, especially in harsh environments.
How should I clean the chassis after painting?
Clean with mild detergents and water. Avoid using abrasive cleaners or harsh solvents that could damage the coating.
Troubleshooting
Coating is too thick or difficult to apply
Ensure correct mixing ratios of paint, hardener, and thinner. Adjust thinner amount within recommended limits based on temperature and application method.
Poor adhesion or peeling
Verify surface preparation was adequate. Ensure the surface was clean, dry, and free of contaminants. Check compatibility with the substrate and any previous coatings.
Orange peel or uneven finish
Adjust spray gun settings (pressure, fan pattern, flow rate) and application technique. Ensure proper viscosity and drying conditions. Reduce application speed if necessary.
Bubbles or pinholes in the finish
Ensure proper ventilation during application to allow gases to escape. Check for contamination on the surface or in the air. Avoid over-thinning.
Pros and Cons
Pros
- Excellent corrosion and rust prevention due to zinc phosphate.
- Durable, high-build finish suitable for demanding commercial use.
- Resistant to UV, weather, and solvents for longevity.
- Good adhesion to common chassis materials.
- Professional semi-gloss aesthetic.
Cons
- Requires a 2K mixing process (paint, hardener, thinner).
- Requires proper ventilation and personal protective equipment.
- Full cure takes 7-8 days, requiring patience before heavy use.
- May require specialized application equipment for best results with certain methods.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) system that requires mixing. The kit includes 3.81L of paint, 0.95L of hardener, and 0.74L of thinner. Follow the manufacturer's recommended mixing ratio precisely. Ensure all surfaces are clean, dry, and free from contaminants such as grease, oil, and existing loose paint. Proper surface preparation, including priming if necessary, is crucial for optimal adhesion and performance. Stir components thoroughly before mixing and allow for a brief induction period if specified by the manufacturer.
Compatibility: This topcoat is designed for application over steel, galvanized steel, and aluminum surfaces. It is suitable for use with various application methods including electrostatic, Airmix, Airless, and brush. Ensure compatibility with any existing primer or undercoat layers before full application.
Care: Once fully cured, the finish is durable and resistant. Clean surfaces with mild detergents and water. Avoid abrasive cleaners or solvents that could damage the coating. Inspect the chassis periodically for any signs of damage and touch up as needed, following the same preparation and application guidelines.