Ft Paints Chassis Paint - 400ml - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 400ml white aerosol of Ft Paints 2K PU265 HS Chassis Topcoat is designed for professionals and DIY enthusiasts seeking durable protection for truck and commercial vehicle chassis. Its key benefit is providing a high-build, semi-gloss finish with excellent corrosion and weather resistance, ensuring longevity in harsh environments. A potential caveat is the need for proper ventilation and protective gear due to its professional-grade formulation. Key features include its polyurethane acrylic base, zinc phosphate reinforcement, strong adhesion, and heat resistance.
All features
| Colour | White |
|---|---|
| Model Part Number | 2K PU265 HS |
| Brand | FT Paints |
| Container Volume | 400ml |
Extended Product Information
FAQs
What is the best way to prepare the chassis before painting?
Thoroughly clean the chassis to remove all dirt, grease, oil, and loose rust. Sand down any rough areas and ensure the surface is completely dry before applying the topcoat or a compatible primer.
How long does it take for the paint to be fully cured?
The paint will be dust-dry in 15-30 minutes. However, it requires 7-8 days under standard conditions to achieve a full cure.
Can this paint be used on other vehicle parts besides the chassis?
Yes, it is suitable for any steel, galvanised steel, or aluminium component requiring a durable, protective coating with good weather and corrosion resistance, provided the application method is suitable.
What is the coverage rate of the 400ml aerosol can?
Coverage varies depending on the surface texture and application thickness. Generally, a 400ml aerosol can cover approximately 1-1.5 square meters with a single coat.
Is this paint suitable for areas exposed to high heat?
Yes, the formulation is heat resistant and can withstand short-term exposure up to 180°C, making it suitable for areas near exhaust systems or engine components where heat is a factor.
What safety precautions should I take when using this product?
Always use in a well-ventilated area and wear appropriate personal protective equipment, including chemical-resistant gloves, safety goggles, and a respirator suitable for organic vapours.
Can I apply this paint over existing paint?
It is recommended to lightly abrade and clean existing paint. If the existing paint is sound and well-adhered, this topcoat can be applied. For best results, use a compatible primer.
Troubleshooting
Uneven spray pattern or sputtering
Ensure the can is shaken thoroughly before and during use. Clear the nozzle by inverting the can and spraying briefly. Check for blockages in the spray mechanism.
Coating not adhering properly
Verify the surface was properly cleaned, degreased, and free of rust before application. Ensure the surface was not contaminated between preparation and painting.
Runs or drips in the finish
Apply in thin, even coats. Avoid spraying too close to the surface or applying excessive material in one pass. Allow adequate flash-off time between coats.
Poor coverage
Apply additional thin coats. Ensure consistent spray distance and overlap. The white colour may require more coats for full opacity compared to darker colours.
Pros and Cons
Pros
- Provides robust, long-lasting protection for vehicle chassis.
- Excellent resistance to corrosion, UV, and solvents.
- Achieves a professional semi-gloss finish.
- Suitable for various application methods.
- Durable and heat-resistant formula.
Cons
- Requires proper ventilation and personal protective equipment.
- Full cure takes 7-8 days, limiting immediate heavy use.
- Aerosol format may be less economical for very large jobs compared to bulk options.
Setup, Compatibility & Care
Preparation:
Ensure the surface to be coated is clean, dry, and free from grease, oil, rust, and old paint. For optimal results, prime the surface with a compatible primer. Shake the aerosol can vigorously for at least two minutes after hearing the mixing ball. Remove the spray button and turn the can upside down, pressing the button briefly to clear the nozzle.
Application:
Apply in a well-ventilated area, wearing appropriate personal protective equipment (gloves, mask, eye protection). Hold the can approximately 25-30 cm from the surface and spray with smooth, even strokes. Apply multiple thin coats rather than one heavy coat, allowing flash-off time between coats as recommended.
Compatibility:
This topcoat is designed to adhere strongly to steel, galvanised steel, and aluminium. It is compatible with various application methods, including electrostatic, Airmix, Airless, and brush application when used with appropriate reducers and hardeners (refer to technical data sheet for specific product versions).
Care:
Clean spray nozzles immediately after use by inverting the can and spraying until clear propellant emerges. Store cans in a cool, dry place away from direct sunlight and sources of ignition. Once opened, the mixed product has a limited pot life; consult specific product documentation for details.