Ft Paints Chassis Paint - 400ml - Traffic Red
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for automotive professionals and DIY enthusiasts looking to protect and enhance the chassis of trucks and commercial vehicles. The FabioT. RT 2K PU265 HS Chassis Topcoat offers durable, high-build protection with a professional semi-gloss finish and active corrosion resistance, a key benefit for longevity in harsh conditions. A caveat is that it is a 2K system requiring proper mixing and ventilation.
All features
| Colour | Red |
|---|---|
| Model Part Number | FT-PU265-400AER-S-TC |
| Brand | FabioT. |
| Container Volume | 400ml |
Extended Product Information
FAQs
What is the best way to prepare the surface before application?
The surface must be clean, dry, and free from grease, oil, dirt, and any loose material. Mechanical abrasion (sanding) and degreasing are recommended for optimal adhesion.
Can this paint be used on plastic parts?
This product is formulated for metal surfaces like steel, galvanised steel, and aluminium. Compatibility with plastics is not guaranteed and testing in an inconspicuous area is advised.
How long does it take for the paint to fully cure?
Under standard conditions, the paint will be dust-dry in 15-30 minutes, but it requires 7-8 days for a full cure. Avoid heavy use or harsh cleaning until fully cured.
What temperature range is suitable for application?
Ideal application temperatures are typically between 10°C and 25°C. Avoid application in direct sunlight, high humidity, or freezing conditions.
Is this paint suitable for exterior body panels, or just the chassis?
While formulated for chassis, its durability and resistance properties make it suitable for other heavy-duty exterior metal components where a semi-gloss finish and protection are desired.
How should I store the unused aerosol can?
Store in a cool, dry place away from direct sunlight and heat sources. Ensure the nozzle is clear after use by inverting the can and spraying until only propellant emerges.
What PPE is required when using this product?
Always use in a well-ventilated area and wear appropriate PPE, including chemical-resistant gloves, safety glasses or goggles, and a respirator suitable for organic vapours.
Troubleshooting
Uneven spray or poor finish
Ensure the can is properly shaken and held at the correct distance from the surface. Check for nozzle blockages and clean if necessary. Apply in consistent, overlapping strokes.
Coating not drying properly
Verify that the 2K components were mixed correctly and that environmental conditions (temperature, humidity) are within the recommended range for application and drying. Ensure adequate ventilation.
Poor adhesion to surface
The surface may not have been adequately prepared. Re-clean, degrease, and potentially re-prime the surface before reapplication. Ensure the substrate is compatible.
Runs or drips forming
The product may have been applied too thickly or from too close a distance. Apply in thin, even coats and allow flash-off time between them. Maintain correct spray distance.
Pros and Cons
Pros
- Provides robust, long-lasting protection for vehicle chassis.
- Excellent resistance to corrosion, weather, UV, and solvents.
- Achieves a professional semi-gloss finish with good coverage.
- Suitable for high-temperature applications.
- Versatile application methods cater to various user needs.
Cons
- Requires proper mixing of the 2K components.
- Adequate ventilation is necessary during application due to its chemical nature.
- Full cure time of 7-8 days may require extended downtime for vehicles.
- The 400ml aerosol format might be insufficient for very large projects, requiring multiple cans.
Setup, Compatibility & Care
Setup: As a 2K (two-component) product in an aerosol can, ensure thorough mixing by shaking the can vigorously for at least two minutes before and occasionally during use. Activate the second component as per specific can instructions if applicable to the aerosol format. Use in a well-ventilated area and wear appropriate personal protective equipment (PPE), including gloves, eye protection, and a respirator.
Compatibility: This coating strongly adheres to properly prepared surfaces of steel, galvanised steel, and aluminium. Ensure surfaces are clean, dry, and free from grease, oil, and existing loose paint or rust. A suitable primer may be recommended for optimal adhesion and corrosion protection, especially on bare metals.
Care: Once fully cured, the coated surface is durable and resistant to most cleaning agents. Clean with mild detergents and water. Avoid abrasive cleaners or solvents that could damage the finish. Regular washing will help maintain the protective qualities and appearance.