Ft Paints Chassis Paint - 400ml - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for owners and operators of trucks and commercial vehicles seeking robust chassis protection. The FabioT. 2K PU265 HS Chassis Topcoat offers a high-build, durable finish with excellent corrosion resistance, but its professional formulation requires specific application knowledge. This guide covers its features, benefits, and practical application to ensure optimal performance.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 2K PU265 HS |
| Brand | FabioT. |
| Container Volume | 400ml |
Extended Product Information
FAQs
What is the primary use of FabioT. 2K PU265 HS Chassis Topcoat?
It is designed for heavy-duty protection of truck and commercial vehicle chassis, offering durable, corrosion-resistant, and weatherproof coating.
How long does it take to dry?
The coating is dust-dry in 15-30 minutes under standard conditions. Full cure takes approximately 7-8 days.
Can this product be applied with a brush?
Yes, the versatile formulation allows for application by brush, electrostatic, Airmix, and Airless spray methods.
What surfaces can this topcoat be applied to?
It adheres strongly to steel, galvanised steel, and aluminium. Priming may be necessary for some surfaces.
Is this coating resistant to heat?
Yes, it can withstand short-term exposure up to 180°C, making it suitable for areas near engine components or exhaust systems.
What is the benefit of the zinc phosphate reinforcement?
Zinc phosphate provides active corrosion protection, actively preventing rust formation and extending the lifespan of the chassis.
What is the recommended environmental condition for application?
Optimal application and curing occur under standard conditions, avoiding excessively high humidity or low temperatures, which can affect drying and curing times.
Troubleshooting
Poor adhesion or peeling
Ensure the surface was properly cleaned and prepared. Remove any grease, oil, or loose rust before application. Check for incompatible primers or substrates.
Uneven finish or runs
Adjust spray gun settings (pressure, distance, speed). Ensure consistent application technique. Reduce application thickness if necessary.
Coating remains tacky
This may be due to insufficient mixing of components (if applicable to specific application methods), low ambient temperature, or high humidity. Ensure correct mixing ratios and appropriate environmental conditions for application and curing.
Corrosion visible through coating
Surface was not adequately de-rusted or treated before application. Ensure all rust is removed and an appropriate anti-corrosive primer is used if necessary. Apply a second coat if coverage is insufficient.
Pros and Cons
Pros
- Excellent corrosion and rust prevention due to zinc phosphate content.
- Durable, high-build formula withstands heavy-duty use.
- Offers strong adhesion to a variety of metal substrates.
- Resistant to UV, weather, and solvents for longevity.
- Fast drying time improves application efficiency.
Cons
- Requires specific application knowledge for optimal results.
- Not suitable for direct application on plastics or non-metal surfaces without proper priming.
- Full cure time of 7-8 days means it needs protection during this period.
- Aerosol format (400ml) may be insufficient for very large chassis.
- Professional formulation may require good ventilation and personal protective equipment.
Setup, Compatibility & Care
Surface Preparation: Ensure surfaces are clean, dry, and free from grease, oil, and rust. For best results, abrasive blasting or mechanical cleaning to remove rust and old coatings is recommended. Prime steel, galvanised steel, and aluminium surfaces with an appropriate primer if necessary.
Application: This product can be applied using electrostatic, Airmix, Airless spray, or brush methods. Ensure adequate ventilation and wear appropriate personal protective equipment (PPE) such as gloves, eye protection, and respiratory protection.
Compatibility: Compatible with steel, galvanised steel, and aluminium. Avoid application on plastics or non-ferrous metals without a suitable primer.
Care: Once fully cured, the surface is durable and easy to clean with standard automotive cleaning agents. Avoid abrasive cleaners or high-pressure washing directly on coated seams.