FabioT. FT Paints 2.75 L Kit Chassis Paint - Satin Gloss Finish - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 2.75L kit of FabioT. FT Paints 2K PU265 HS Chassis Paint is designed for professionals and serious DIYers seeking robust, long-lasting protection for truck and commercial vehicle chassis. Its key benefit is superior corrosion and weather resistance due to a high-build polyurethane acrylic formula reinforced with zinc phosphate. A potential caveat is the need for proper ventilation and personal protective equipment due to its chemical composition.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 2K PU265 HS |
| Brand | FT Paints |
| Container Volume | 2750 |
Extended Product Information
FAQs
What is the shelf life of the mixed paint?
The mixed paint has a limited pot life, typically a few hours. Always refer to the product's technical data sheet for specific pot life information and recommended usage times after mixing.
Do I need a special primer for this paint?
For optimal adhesion and corrosion resistance, especially on bare metal, a compatible primer is recommended. Consult the manufacturer's guidelines for specific primer recommendations based on the substrate.
What is the recommended temperature for application?
The ideal application temperature is typically between 10°C and 30°C (50°F and 86°F). Avoid applying in extreme temperatures or high humidity. Refer to the technical data sheet for precise recommendations.
How long does it take for the paint to fully cure?
Under standard conditions, the paint becomes dust-dry in 15-30 minutes. However, it requires approximately 7-8 days for a full cure, during which it reaches its maximum hardness and resistance properties.
Can this paint be used on surfaces other than vehicle chassis?
While specifically formulated for chassis, its durable and protective properties might make it suitable for other heavy-duty metal applications requiring strong corrosion and weather resistance. Always test on a small area first and consult the manufacturer.
What kind of thinner should be used?
A specific polyurethane thinner, usually included or recommended by the manufacturer, is required. Do not use general-purpose thinners, as they may affect the coating's performance and drying characteristics.
Troubleshooting
Poor adhesion
Ensure the surface is properly prepared, clean, dry, and free from contaminants. Verify the correct mixing ratios and application conditions.
Uneven finish or runs
Adjust application technique (e.g., spray pattern, distance, speed) and viscosity. Ensure proper temperature and humidity conditions during application.
Slow drying time
Check ambient temperature and humidity; conditions may be too cold or humid. Ensure correct hardener and thinner ratios were used.
Coating bubbling
Ensure surface is completely dry before application. Avoid applying in direct sunlight or excessively high temperatures. Check for contamination on the surface or in the application equipment.
Pros and Cons
Pros
- Provides excellent, long-term protection against corrosion and environmental damage.
- The semi-gloss finish offers a professional and attractive appearance.
- Good adhesion to various metal substrates commonly found in chassis construction.
- Heat resistant properties make it suitable for demanding operational conditions.
- Fast drying times improve workflow efficiency.
Cons
- Requires a two-component mixing process (paint, hardener, thinner), demanding accuracy.
- Proper ventilation and Personal Protective Equipment (PPE) are essential during application.
- Full cure takes several days, during which the surface may still be vulnerable.
- Not suitable for all substrate types without appropriate surface preparation.
Setup, Compatibility & Care
Setup: This is a two-component system requiring precise mixing of the paint, hardener, and thinner. Always refer to the product's technical data sheet for the exact mixing ratios. Ensure surfaces are clean, dry, and free from grease, oil, and previous coatings before application. A primer may be necessary depending on the substrate and desired finish. Application methods include electrostatic, Airmix, Airless, and brush.
Compatibility: The paint is designed for strong adhesion to steel, galvanized steel, and aluminum. Ensure compatibility with any existing coatings or primers if not applying to bare metal.
Care: Once fully cured, the finish is durable and resistant to many chemicals. Clean with mild detergents and water. Avoid abrasive cleaners or solvents that could damage the coating. Store unused mixed product according to manufacturer guidelines, as it has a limited pot life.