FabioT. Chassis Paint - 20000ml - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 20.0L kit of FabioT. RT 2K PU265 HS Chassis Topcoat in Grey is designed for professionals and fleet owners seeking durable, high-build protection for truck and commercial vehicle chassis. Its key benefit is superior corrosion and weather resistance due to zinc phosphate reinforcement, offering a long-lasting semi-gloss finish. A potential caveat is the requirement for a two-component mixing process and appropriate application equipment.
All features
| Colour | Grey |
|---|---|
| Model Part Number | RT 2K PU265 HS |
| Brand | FabioT. |
| Container Volume | 20000ml |
Extended Product Information
FAQs
What is the coverage rate of the 20.0L kit?
Coverage varies based on application thickness and method. Typically, a high-build coating like this can cover approximately 4-6 m² per litre at the recommended film thickness. Consult the product's technical data sheet for precise figures.
Can this paint be applied with a brush or roller?
Yes, while spray application is recommended for best results, this product is suitable for brush and roller application, especially for smaller areas or touch-ups. Ensure even coats are applied.
What is the shelf life of the product?
Unmixed components typically have a shelf life of at least one year when stored in original, sealed containers in a cool, dry place. Refer to the container for specific expiry dates.
How long should I wait between coats?
The recoat window depends on temperature and humidity. Generally, if applied within the 'recoat to dissolve' window (often within a few hours), a second coat can be applied directly. If the first coat has fully cured, light abrasion may be needed. Refer to the technical data sheet for specific recoat times.
Is this paint suitable for other surfaces besides chassis?
While formulated for heavy-duty chassis protection, its properties of adhesion, durability, and resistance might make it suitable for other robust metal applications where similar protection is required. Always test on a small, inconspicuous area first.
What safety precautions should I take during application?
Always use in a well-ventilated area. Wear appropriate personal protective equipment, including a respirator with organic vapor cartridges, safety glasses or goggles, and chemical-resistant gloves. Refer to the Safety Data Sheet (SDS) for full details.
How is the hardener and thinner supplied?
The 20.0L kit includes separate containers for the hardener (3.4L) and thinner (2.8L) that must be mixed with the paint (13.8L) according to the manufacturer's instructions.
Troubleshooting
Paint not drying properly
Ensure correct hardener and thinner ratios were used. Check ambient temperature and humidity; application in cold or very humid conditions can slow drying. Verify the product has not expired.
Poor adhesion or blistering
Surface preparation was likely inadequate. Ensure the substrate was clean, dry, and free of contaminants. Re-prepare the surface and reapply according to specifications.
Uneven finish or sags
Improper application technique or incorrect viscosity. Adjust spray gun settings, maintain consistent distance and speed, and ensure the paint mixture has the correct viscosity for the chosen application method.
Coating is too thick or thin
Verify the mixing ratios of paint, hardener, and thinner. Adjust the amount of thinner based on application method (e.g., Airless may require less thinner than conventional spray) and ambient conditions.
Pros and Cons
Pros
- Provides robust, long-lasting protection for commercial vehicle chassis.
- Excellent resistance to corrosion, UV, and chemicals.
- Suitable for a wide range of metal surfaces.
- Professional semi-gloss finish enhances appearance.
- Withstands high temperatures common in heavy-duty use.
- Fast drying properties improve application efficiency.
Cons
- Requires mixing of paint, hardener, and thinner (2K system).
- May require specialized spray equipment for optimal application.
- Full cure takes several days, limiting immediate heavy use.
- Potential for overspray requires careful masking and ventilation.
- Specific surface preparation is essential for optimal adhesion.
Setup, Compatibility & Care
Setup: This product is a 2K (two-component) system, requiring the precise mixing of paint, hardener, and thinner. The kit includes 13.8L of paint, 3.4L of hardener, and 2.8L of thinner. Always follow the manufacturer's recommended mixing ratios (typically 4:1:0.5 or similar, consult product documentation for exact ratios) and stir thoroughly before application.
Compatibility: The coating demonstrates strong adhesion to prepared surfaces of steel, galvanised steel, and aluminium. Ensure all surfaces are clean, dry, and free from contaminants like grease, oil, or existing rust. For best results, use an appropriate primer if required for the specific substrate or condition.
Care: To maintain the protective finish, regularly clean the chassis with mild detergents and water. Avoid abrasive cleaners or high-pressure washing directly on coated areas. Inspect for any damage and touch up promptly to prevent corrosion from starting.