Ft Paints Chassis Paint - 400ml - Red
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 400ml aerosol of FabioT. RT 2K PU265 HS Chassis Topcoat in Red is designed for heavy-duty protection of truck and commercial vehicle chassis. Its key benefit is providing durable, corrosion-resistant, and weatherproof coating with a professional semi-gloss finish. A caveat is its specific formulation for chassis; it may not be ideal for all metal surfaces without proper preparation. This high-build polyurethane acrylic coating offers excellent adhesion, heat resistance, and fast drying times for efficient application.
All features
| Colour | Red |
|---|---|
| Model Part Number | FT-PU265-400AER-SG-TC |
| Brand | FT Paints |
| Container Volume | 400 |
Extended Product Information
FAQs
What is the best way to prepare the surface before applying this paint?
The surface must be clean, dry, and free from contaminants like grease, oil, and rust. For best results, lightly abrade the surface and ensure it is completely free of dust before application.
How long does it take for the paint to fully cure?
The paint becomes dust-dry in 15-30 minutes under standard conditions. However, a full cure, where the coating reaches its maximum hardness and durability, typically takes 7 to 8 days.
Can this paint be used on surfaces other than vehicle chassis?
While primarily formulated for heavy-duty chassis protection, it can adhere well to steel, galvanised steel, and aluminium. However, ensure the surface is properly prepared and suitable for a high-build polyurethane coating.
What is the temperature resistance of this coating?
The coating can withstand short-term exposure to temperatures up to 180°C, making it suitable for applications near heat sources.
How should I clean the painted surface?
Clean the surface with mild detergents and water. Avoid using abrasive cleaners or strong solvents, as these can damage the protective coating.
What is the volume of this product?
This specific product is a 400ml aerosol can.
Does the zinc phosphate provide ongoing protection?
Yes, the zinc phosphate is an active anti-corrosive additive that provides continuous protection against rust and corrosion, especially in challenging environments.
Troubleshooting
Uneven spray pattern or sputtering
Ensure the nozzle is clear. Shake the can more frequently during application. Test spray on a scrap surface.
Coating runs or sags
Application distance may be too close, or coats applied too thickly. Reduce spray pressure (if applicable), increase distance, and apply thinner coats. Allow proper drying between coats.
Poor adhesion or peeling
Surface was not properly prepared (e.g., still greasy, dusty, or not primed). Ensure thorough cleaning and degreasing before application.
Rust spots appearing quickly
The initial surface may have had significant rust that was not fully removed or treated. Ensure all rust is removed or treated with a rust converter before applying the topcoat.
Pros and Cons
Pros
- Provides excellent heavy-duty protection for vehicle chassis.
- Offers superior corrosion and weather resistance.
- Achieves a professional semi-gloss finish.
- Strong adhesion to multiple metal types.
- Good heat resistance for demanding applications.
Cons
- Specific formulation for chassis may limit its use on other surfaces.
- Requires proper surface preparation for optimal adhesion.
- Full cure time of 7-8 days may be lengthy for some urgent projects.
- Aerosol application may lead to overspray if not carefully managed.
Setup, Compatibility & Care
Setup: Ensure the surface to be coated is clean, dry, and free from grease, oil, and rust. For optimal adhesion, lightly abrade the surface if necessary. Shake the aerosol can vigorously for at least two minutes before use, and periodically during application. Apply in thin, even coats, maintaining a consistent distance of approximately 20-25 cm from the surface. Allow adequate drying time between coats as specified.
Compatibility: This product is designed to adhere strongly to steel, galvanised steel, and aluminium. It is not recommended for use on plastics or flexible materials without appropriate priming. It is compatible with electrostatic, Airmix, and Airless spray systems, as well as brush application, though the aerosol format is optimized for spray use.
Care: Once fully cured, the coated surface can be cleaned using mild detergents and water. Avoid using abrasive cleaners or solvents that could damage the coating. Regular cleaning will help maintain the protective properties and appearance of the finish.