FabioT. FT Paints Chassis Paint - 100ml - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for owners and operators of commercial vehicles and trucks requiring a durable, high-performance coating for chassis protection. The key benefit is robust, long-lasting protection against corrosion and environmental damage, ensuring vehicle longevity. A potential caveat is the need for proper application conditions and safety precautions due to its professional-grade formulation. This product is a 2K polyurethane acrylic coating designed for heavy-duty protection, featuring a semi-gloss finish and reinforced with zinc phosphate for active corrosion resistance. Its key features include high build, excellent weather and UV resistance, strong adhesion to various metal surfaces, heat resistance, and fast drying times.
All features
| Colour | White |
|---|---|
| Model Part Number | FT-PU265-100SAM-SG-TC |
| Brand | FT Paints |
| Container Volume | 100ml |
Extended Product Information
FAQs
What is the best way to prepare a surface before applying this paint?
The surface must be clean, dry, and free from grease, oil, and rust. Degreasing and mechanical preparation (sanding or abrasive blasting) followed by priming if necessary for the substrate are recommended for optimal adhesion.
How long does it take for the paint to be fully cured?
Under standard conditions, the paint achieves a full cure in approximately 7-8 days. It will be dust-dry within 15-30 minutes.
Can this paint be applied with a brush?
Yes, this paint is suitable for brush application, as well as electrostatic, Airmix, and Airless methods. Ensure even strokes for a consistent finish.
What is the heat resistance of this coating?
The coating can withstand short-term exposure to temperatures up to 180°C.
Is this paint suitable for indoor use on non-chassis metal parts?
While designed for heavy-duty chassis protection, its durability and resistance properties may make it suitable for other demanding metal applications, provided the finish and application method are appropriate for the specific use case.
What is the function of the zinc phosphate in the formula?
Zinc phosphate acts as an active corrosion inhibitor, providing an additional layer of protection against rust and metal degradation, especially in harsh environments.
Can I apply this paint over existing paint?
Compatibility with existing coatings depends on the type and condition of the original paint. It is generally recommended to apply to a properly prepared substrate or over compatible primers for best results. Test on a small area first if unsure.
Troubleshooting
Paint not drying or curing properly
Ensure correct mixing ratios if applicable for the 2K system and that environmental conditions (temperature, humidity) are within the recommended range for application and curing. Check for contamination on the surface.
Poor adhesion to surface
Verify that the surface was adequately prepared, cleaned, and free from contaminants like oil, grease, or rust. Ensure proper priming if required for the substrate.
Uneven finish or streaks
Adjust spray technique, viscosity, or application equipment settings (e.g., nozzle size, air pressure) as per the manufacturer's guidelines for the chosen application method.
Runs or sags in the coating
Apply thinner, more uniform coats rather than one heavy coat. Ensure the surface is not overloaded and allow adequate flash-off time between coats if recommended.
Pros and Cons
Pros
- Provides excellent, long-term protection for vehicle chassis.
- Reinforced with zinc phosphate for superior corrosion resistance.
- Durable semi-gloss finish that is both functional and aesthetic.
- Resistant to UV, weather, and solvents for extended performance.
- Fast drying properties improve application efficiency.
Cons
- Requires specific application conditions and safety equipment.
- Full cure takes several days, limiting immediate heavy use.
- 100ml sample size may be insufficient for large projects.
- Professional-grade product, potentially requiring experienced application.
Setup, Compatibility & Care
Setup: Ensure the application area is well-ventilated and that appropriate personal protective equipment (PPE) such as gloves, eye protection, and respiratory masks are worn. Surfaces must be clean, dry, and free from grease, oil, and rust. For best results, prepare the surface by degreasing and abrading or priming as recommended for the specific metal type.
Compatibility: This paint exhibits strong adhesion to steel, galvanised steel, and aluminium. It is formulated for use with electrostatic, Airmix, Airless, and brush application methods. Ensure all application equipment is clean before use.
Care: Once fully cured, the painted surface is durable and resistant to most common cleaning agents. Regular washing with mild soap and water is sufficient to maintain its appearance and protective qualities. Avoid abrasive cleaners or tools that could scratch the semi-gloss finish.