FabioT. Chassis Paint - Satin Gloss Finish - Jet Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and DIYers working on truck and commercial vehicle chassis. Its key benefit is providing robust, long-lasting protection against corrosion and environmental damage with a semi-gloss finish. A potential consideration is the need for proper ventilation and protective gear due to its 2K polyurethane acrylic formulation. The FabioT. RT 2K PU265 HS Chassis Topcoat is a high-build coating reinforced with zinc phosphate for active corrosion protection. This kit includes 2.75L of product (1.90L Paint, 0.48L Hardener, 0.37L Thinner), offering a durable, semi-gloss finish with excellent resistance to weather, UV, and solvents.
All features
| Colour | Black |
|---|---|
| Model Part Number | FT-PU265-P1.90L-H0.48L-T0.37L-SG-GS |
| Brand | FT Paints |
| Container Volume | 2750 |
Extended Product Information
FAQs
What is the shelf life of the unopened product?
Unopened components should be stored in a cool, dry place away from direct sunlight. Refer to the product packaging or manufacturer's technical data sheet for specific shelf-life information.
Can this product be applied in cold weather?
While the product can be applied in cooler temperatures, the drying and curing times will be significantly extended. For optimal results, apply within the manufacturer's recommended temperature range.
What is the mixing ratio for the kit?
The standard mixing ratio for this kit is 1.90L of Paint to 0.48L of Hardener and 0.37L of Thinner. Always refer to the latest technical data sheet for precise instructions.
How long does it take for the coating to be fully cured?
Under standard conditions (e.g., 20°C and 50% relative humidity), the coating will achieve full cure in approximately 7 to 8 days.
Is this paint suitable for exterior metal facades?
This specific product, RT 2K PU265 HS Chassis Topcoat, is formulated for heavy-duty chassis protection. While it offers excellent weather resistance, FabioT. may offer other products specifically designed for metal facades that might be more appropriate depending on the aesthetic and performance requirements.
Can I recoat the surface after the initial application?
Yes, recoating is possible. Ensure the previous coat is clean and free from contaminants. Check the manufacturer's guidelines for recommended recoat windows and surface preparation between coats.
What kind of PPE is required?
Due to the 2K nature of the product, it is essential to wear appropriate Personal Protective Equipment (PPE), including a solvent-resistant respirator, chemical-resistant gloves, and eye protection. Ensure adequate ventilation during application and curing.
Troubleshooting
Coating is not drying or curing properly
Ensure the correct mix ratio of paint and hardener was used. Check ambient temperature and humidity; curing is slower in cold or damp conditions. Verify product expiry dates.
Poor adhesion to the surface
The substrate may not have been properly cleaned or prepared. Ensure surfaces are free from grease, oil, rust, and old paint. A suitable primer may be required for optimal adhesion.
Uneven finish or visible brush marks
If brushing, use a high-quality brush and apply thin, even coats. If spraying, adjust pressure, nozzle size, and spray pattern. Ensure proper thinning if necessary.
Runs or sags in the coating
Applied too thickly or improperly thinned. Reduce the thickness of subsequent coats or adjust thinner ratio. Ensure correct spray technique or brushing method.
Pros and Cons
Pros
- Excellent durability and protection for heavy-duty chassis.
- Active corrosion resistance due to zinc phosphate content.
- Resistant to UV, weather, and solvents, ensuring longevity.
- Good adhesion to common chassis materials.
- Suitable for high-temperature environments.
- Fast drying improves application efficiency.
Cons
- Requires proper ventilation and personal protective equipment (PPE) due to 2K formulation.
- Full cure takes 7-8 days, requiring patience for maximum durability.
- Not suitable for direct food contact applications.
- Application may require specialized equipment for certain methods (e.g., electrostatic).
Setup, Compatibility & Care
Setup:
- Ensure the application area is well-ventilated and free from dust. Wear appropriate PPE, including a respirator, gloves, and eye protection.
- Mix the paint, hardener, and thinner in the correct proportions as specified by the manufacturer (typically 1.90L paint : 0.48L hardener : 0.37L thinner for this kit).
- Stir thoroughly until a homogenous mixture is achieved.
- Allow a short induction time (if recommended by the manufacturer) before application.
Compatibility:
- Substrates: Bonds well to properly prepared steel, galvanised steel, and aluminium.
- Application Methods: Suitable for electrostatic, Airmix, Airless spray, and brush application.
Care:
- Clean tools and equipment immediately after use with an appropriate solvent.
- Store unused mixed product in a sealed container in a cool, dry place. Unmixed components should be stored according to manufacturer guidelines.
- The coated surface should be cleaned using mild detergents and water. Avoid abrasive cleaners.