Ft Paints Chassis Paint - 2.75 L Kit - Traffic Red
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for owners and operators of trucks and commercial vehicles who need robust, long-lasting protection for their chassis. The Ft Paints RT 2K PU265 HS Chassis Topcoat offers a durable, semi-gloss finish with excellent corrosion and weather resistance, but it requires proper mixing and application techniques for optimal results.
All features
| Colour | Red |
|---|---|
| Model Part Number | 265 |
| Brand | FT Paints |
| Container Volume | 2750 |
Extended Product Information
FAQs
What is the shelf life of the mixed product?
Once mixed, the product has a limited pot life, typically a few hours, during which it must be used. Refer to the product's technical data sheet for the exact pot life at a given temperature.
Can this be applied over existing paint?
Yes, it can be applied over existing, well-adhered paint systems after proper surface preparation (cleaning, scuffing, and degreasing). For best results and maximum durability, a compatible primer is recommended.
What thinner should I use?
The product information states it comes with a thinner. For thinning beyond what is included or for cleaning, use a compatible polyurethane thinner. Always refer to the technical data sheet for specific recommendations.
How long should I wait before using the vehicle after painting?
While the paint may be dust-dry quickly, a full cure takes 7-8 days. Avoid heavy use, washing, or exposing the chassis to extreme conditions until the full cure is achieved to prevent damage.
Is personal protective equipment (PPE) required?
Yes, as with most industrial coatings, appropriate PPE including gloves, eye protection, and respiratory protection (especially during spraying) is essential for safe application.
What surfaces can this product be applied to?
It is designed for steel, galvanized steel, and aluminum. Proper surface preparation is crucial for all substrates.
What is the coverage rate?
Coverage rates vary based on application method and surface porosity. Consult the technical data sheet for specific coverage information per liter or gallon.
Troubleshooting
Paint not drying or curing properly
Ensure correct mixing ratios of paint, hardener, and thinner. Check ambient temperature and humidity; application is best between 15-25°C and 50-75% humidity. Insufficient ventilation can also slow curing.
Poor adhesion to the surface
Verify the surface was properly prepared (cleaned, degreased, free from rust and old coatings). Ensure the correct primer was used if necessary, and that the surface was not contaminated after preparation.
Runs or sags in the finish
Avoid applying the coating too thickly. Reduce the amount of thinner if the viscosity is too low for the application method. Ensure spray application has the correct fan pattern and distance.
Uneven finish or texture
Ensure thorough mixing of all components. Maintain consistent application technique (spray pattern, speed, or brush strokes). Check for blockages or issues with application equipment.
Pros and Cons
Pros
- Provides superior protection against corrosion and weathering.
- Durable, long-lasting finish for heavy-duty applications.
- Achieves a professional semi-gloss appearance.
- Fast drying times reduce project turnaround.
- Good adhesion to common chassis materials.
Cons
- Requires proper mixing of paint, hardener, and thinner.
- Full cure takes several days, requiring careful handling during this period.
- Application may require specialized equipment for best results (e.g., spray guns).
- Specific temperature and humidity conditions may affect drying and curing.
- Two-component system means components can expire if not stored correctly.
Setup, Compatibility & Care
Setup:
This product is a kit containing paint, hardener, and thinner. It requires precise mixing ratios before application. Consult the product's technical data sheet for the exact proportions of each component and the recommended induction time. Ensure the application area is well-ventilated and free from dust and contaminants.
Compatibility:
Suitable for direct application onto prepared steel, galvanized steel, and aluminum surfaces. Ensure surfaces are clean, dry, and free from grease, oil, rust, and old paint. A suitable primer may be recommended for optimal adhesion and protection, especially on bare metal.
Care:
Clean application equipment immediately after use with the recommended thinner. Avoid exposing the painted surface to heavy cleaning chemicals or high-pressure washing until the coating has fully cured.