Ft Paints Chassis Paint Kit - 1100ml - Traffic Red
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for truck and commercial vehicle owners or fleet managers seeking a durable, protective coating for chassis. The key benefit is its high-build, semi-gloss finish that offers excellent corrosion and weather resistance for longevity. A caveat to consider is its 2K (two-component) nature, requiring proper mixing with a hardener and thinner for optimal performance. This product is a high-build polyurethane acrylic coating designed for heavy-duty protection, featuring zinc phosphate for active corrosion prevention, and providing outstanding weather, UV, and solvent resistance.
All features
| Colour | Red |
|---|---|
| Model Part Number | FT-PU265-P0.76L-H0.19L-T0.15L-S-TC |
| Brand | FabioT. |
| Container Volume | 1100ml |
Extended Product Information
FAQs
What is the shelf life of the unmixed product?
Refer to the product packaging for the exact expiry date. Store in a cool, dry place away from direct sunlight.
How long does the mixed product last (pot life)?
The pot life varies depending on temperature but is typically limited. Mix only what you can use within the specified time, usually around 2-4 hours at 20°C. Always consult the technical data sheet.
Can this be applied over existing paint?
Yes, provided the existing paint is in good condition, sound, and properly prepared (cleaned and lightly abraded). Test adhesion on a small area first.
What safety precautions are necessary?
Always wear appropriate personal protective equipment (PPE), including solvent-resistant gloves, eye protection, and a respirator suitable for organic vapors and particulates. Ensure good ventilation during application and drying.
What is the coverage rate?
Coverage depends on the application method and desired film thickness. Consult the product's technical data sheet for specific coverage rates.
How do I clean my spray equipment?
Clean spray guns and equipment immediately after use with a suitable solvent recommended for polyurethane paints.
Is this product suitable for interior chassis components?
Yes, its protective qualities make it suitable for both exterior and interior chassis parts that require durable, corrosion-resistant coating.
Troubleshooting
Coating is too thick or too thin.
Adjust the amount of thinner added according to the recommended dilution ratio for your application method. Ensure temperature is within the recommended range for mixing and application.
Poor adhesion to the surface.
Verify that the surface was thoroughly cleaned, degreased, and properly prepared (e.g., sanded if necessary). Ensure compatibility with the substrate and that a suitable primer was used.
Surface appears dull or uneven after drying.
Check for inconsistencies in application thickness or spraying technique. Ensure proper mixing of the 2K components and adequate ventilation during drying.
Coating remains tacky after extended drying time.
This can indicate incorrect mixing ratios, insufficient hardener, or application in temperatures below the recommended range. Ensure all components are thoroughly mixed and that environmental conditions are suitable.
Pros and Cons
Pros
- Provides robust, long-lasting protection for vehicle chassis.
- Excellent resistance to corrosion, UV, and chemicals.
- Fast drying time speeds up the application process.
- Suitable for various application methods, offering flexibility.
- Professional semi-gloss finish enhances appearance.
Cons
- Requires mixing with a hardener and thinner (2K system).
- Specific curing time of 7-8 days for full strength.
- Heat resistance is for short-term exposure only.
- Requires appropriate safety equipment for application.
- Not suitable for all plastic surfaces without proper priming.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) product. The 1.10L kit contains 0.76L of paint, 0.19L of hardener, and 0.15L of thinner. Proper mixing is crucial: combine the paint and hardener at the recommended ratio (typically 4:1, but always refer to the product's technical data sheet for exact proportions). Once mixed, add the appropriate amount of thinner to achieve the desired viscosity for your chosen application method. Mixed product has a limited pot life, so prepare only what can be used within that timeframe.
Compatibility: The coating adheres well to properly prepared surfaces of steel, galvanized steel, and aluminium. Ensure all surfaces are clean, dry, and free from grease, oil, and existing contaminants. For optimal results, use a suitable primer designed for automotive chassis applications.
Care: Once fully cured (7-8 days), the finish is durable. Clean the chassis using standard automotive cleaning agents and water. Avoid abrasive cleaners or high-pressure washing directly on vulnerable seams or edges. Inspect regularly for any signs of damage that may require touch-up.