Ft Paints Chassis Paint - Black - 100ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for owners and mechanics of trucks and commercial vehicles seeking durable, professional-grade chassis protection. The key benefit is robust, long-lasting defense against corrosion and environmental damage with a semi-gloss finish. A caveat to note is that this is a 2K (two-component) product requiring specific mixing and application procedures. The Ft Paints RT 2K PU265 HS Chassis Topcoat is a high-build polyurethane acrylic coating, reinforced with zinc phosphate for active corrosion protection, offering excellent resistance to weather, UV, and solvents.
All features
| Colour | Black |
|---|---|
| Model Part Number | FT-PU265-100SAM-S-TC |
| Brand | FT Paints |
| Container Volume | 100ml |
Extended Product Information
FAQs
What is a 2K coating?
A 2K coating, or two-component coating, requires the mixing of a base product with a hardener or activator immediately before application. This chemical reaction creates a more durable, resistant, and long-lasting finish compared to single-component coatings.
How much surface area can the 100ml sample cover?
The coverage of the 100ml sample will depend on the application thickness and method. It is generally intended for small touch-up jobs or testing application on a very small area rather than coating an entire chassis.
What is the best way to apply this chassis paint?
This paint is versatile and suitable for electrostatic, Airmix, Airless, and brush application. Spraying methods (Airmix, Airless, electrostatic) typically provide the most even and professional finish for large areas like a vehicle chassis.
How long does the paint last once mixed?
Once mixed, the pot life of a 2K coating is limited. Refer to the product's technical data sheet for the specific pot life of the RT 2K PU265 HS Chassis Topcoat, as it will vary based on temperature. It must be used within this timeframe.
Can I apply this over existing paint?
Yes, provided the existing paint is sound, clean, and degreased. For optimal adhesion and performance, it's recommended to lightly abrade the old surface and consider using a suitable primer if the existing coating is unknown or in poor condition.
What temperature is ideal for application?
Generally, 2K coatings perform best in temperatures between 15°C and 25°C. Always consult the product's technical data sheet for specific recommended application temperatures, as extreme heat or cold can affect drying, curing, and finish quality.
Does this product come with a hardener?
The 100ml sample is a kit bundle, implying it includes the necessary hardener. For larger quantities, always verify if the hardener is included or sold separately, and ensure you purchase the correct type for the RT 2K PU265 HS Chassis Topcoat.
Troubleshooting
Uneven finish or poor coverage
Ensure correct mixing ratio of base and hardener. Check for proper application technique and viscosity. Clean spray gun or brush thoroughly.
Coating not drying or curing properly
Verify the temperature and humidity are within the recommended application range. Ensure the correct mixing ratio was used. Check for contamination on the surface being coated.
Bubbles or pinholes in the finish
Ensure the surface is completely dry and free from contaminants. Reduce spray pressure or apply thinner coats. Ensure proper ventilation during application and drying.
Poor adhesion to the surface
Ensure the surface was properly prepared and is free from rust, grease, and old paint. Use an appropriate primer if recommended for the substrate. Abide by the substrate compatibility guidelines (steel, galvanised steel, aluminium).
Pros and Cons
Pros
- Provides heavy-duty, long-lasting protection for commercial vehicle chassis.
- Offers excellent resistance to corrosion, UV rays, and solvents.
- Achieves a professional semi-gloss finish.
- Suitable for application via various methods, including spray and brush.
- Withstands high temperatures, making it suitable for demanding applications.
Cons
- Requires a two-component mixing process, demanding precision.
- Full cure takes 7-8 days, requiring patience before heavy use.
- Application may require specialized equipment for optimal results.
- The 100ml sample size is best suited for touch-ups or small areas.
Setup, Compatibility & Care
Setup: As a 2K (two-component) product, the RT 2K PU265 HS Chassis Topcoat requires precise mixing of the base and hardener. Always follow the manufacturer's recommended mixing ratio. Ensure the application surface is clean, dry, and free from grease, oil, and old coatings. A suitable primer may be necessary depending on the substrate. For spraying, use appropriate personal protective equipment (PPE) including a respirator, gloves, and eye protection.
Compatibility: This coating is designed to adhere to steel, galvanised steel, and aluminium. It is compatible with electrostatic, Airmix, Airless, and brush application methods. Ensure all application equipment is clean before use.
Care: To maintain the finish, regularly clean the chassis with mild detergents and water. Avoid abrasive cleaners or high-pressure washing directly at coated seams or edges. Inspect periodically for any signs of damage and touch up as needed.