Ft Paints Chassis Paint - 100ml - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This high-build polyurethane acrylic coating is designed for users needing durable protection for truck and commercial vehicle chassis. Its key benefit is active corrosion resistance due to zinc phosphate reinforcement, offering a semi-gloss finish. A potential caveat is that the 100ml sample size may be insufficient for very large projects, requiring multiple kits.
All features
| Colour | Grey |
|---|---|
| Model Part Number | FT-PU265-100SAM-SG-AL |
| Brand | FabioT. |
| Container Volume | 100ml |
Extended Product Information
FAQs
What surfaces can this chassis topcoat be applied to?
It adheres well to steel, galvanised steel, and aluminium surfaces, provided they are properly prepared.
How long does it take for the coating to fully cure?
The coating achieves full cure in approximately 7-8 days under standard conditions, though it will be dust-dry in 15-30 minutes.
Is this product suitable for DIY use?
While suitable for various application methods including brush, it is a professional-grade 2K coating. Proper safety precautions and preparation are essential for optimal results.
What is the temperature resistance of the coating?
It can withstand short-term exposure to temperatures up to 180°C.
How should I clean the coated chassis?
Clean with mild detergents and water. Avoid using abrasive materials or harsh solvents that could damage the semi-gloss finish.
What is the benefit of the zinc phosphate reinforcement?
Zinc phosphate provides active corrosion protection, helping to prevent rust and prolong the life of the chassis in demanding environments.
Can I use this product on other parts of a vehicle besides the chassis?
While formulated for chassis, its properties may make it suitable for other heavy-duty metal components requiring similar protection and durability. Always test on an inconspicuous area first.
Troubleshooting
Coating is not drying properly
Ensure correct mixing ratios of the two components. Verify application temperature and humidity are within recommended ranges. Check for contamination on the surface being coated.
Poor adhesion to the surface
Surface preparation may be inadequate. Ensure the surface is thoroughly cleaned, degreased, and free from rust or old coatings. Re-abrade the surface if necessary.
Uneven finish or brush marks
If applying by brush, use a high-quality brush and apply in thin, even coats. Ensure proper thinning if required by the application method. For spray applications, maintain consistent gun speed and distance.
Pinholes or bubbles in the coating
This can be caused by moisture or trapped air. Ensure the substrate is completely dry. Check spray gun pressure and technique to avoid introducing excessive air.
Pros and Cons
Pros
- Provides robust, long-lasting protection for vehicle chassis.
- Active corrosion resistance enhances durability and prevents rust.
- Good adhesion to common vehicle materials like steel and aluminium.
- Resistant to UV, weathering, and solvents.
- Suitable for various application methods.
Cons
- 100ml sample size might be too small for extensive coverage.
- Requires proper ventilation and personal protective equipment during application.
- Full cure takes 7-8 days, requiring patience before heavy use.
- Two-component (2K) system requires mixing before use.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) system. Ensure components are mixed thoroughly according to manufacturer instructions before application. Proper mixing is critical for achieving the advertised performance properties.
Compatibility: The coating strongly adheres to properly prepared surfaces of steel, galvanised steel, and aluminium. Ensure surfaces are clean, dry, and free from contaminants like grease or rust. It is suitable for electrostatic, Airmix, Airless, and brush application methods.
Care: Once fully cured (7-8 days), the surface is durable and resistant. For routine cleaning, use mild detergents and water. Avoid abrasive cleaners or solvents that could compromise the finish. Store unused, mixed product according to manufacturer guidelines, as pot life is limited.