FabioT. FT Paints 2K PU265 HS Chassis Paint - 5500ml - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for owners and operators of trucks and commercial vehicles seeking a durable, high-performance coating for chassis protection. The FabioT. FT Paints 2K PU265 HS Chassis Paint offers a semi-gloss finish with robust corrosion and weather resistance, acting as a strong defense against harsh environmental conditions. A key consideration is that it's a 2K (two-component) system requiring proper mixing of paint, hardener, and thinner for optimal results.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 2K PU265 HS |
| Brand | FT Paints |
| Container Volume | 5500ml |
Extended Product Information
FAQs
What is the shelf life of the product?
Refer to the product packaging or manufacturer's technical data sheet for specific shelf life information. Store in a cool, dry place away from direct sunlight.
How much area does the 5.50L kit cover?
Coverage varies based on application method and film thickness. Consult the product's technical data sheet for estimated coverage rates.
Can this paint be used on the body of a truck, not just the chassis?
While formulated for heavy-duty chassis protection, its properties may be suitable for other exterior metal parts. However, always test on a small, inconspicuous area first to ensure compatibility and desired finish.
What is the recommended surface preparation before application?
Surfaces should be clean, dry, and free from oil, grease, rust, and old, loose paint. Abrasive blasting or sanding may be required for optimal adhesion, followed by appropriate cleaning.
What is the full cure time?
Under standard conditions, a full cure is typically achieved in 7-8 days. However, it is dust-dry in 15-30 minutes, allowing for handling sooner.
Is this paint safe for use in food processing environments?
This product is designed for chassis protection and is not specified as food-safe. For food-safe applications, a different product line would be required.
What type of thinner should be used?
Use a high-quality polyurethane-grade thinner. Refer to the product's technical data sheet or label for the specific type recommended by FabioT.
Troubleshooting
Paint is not drying properly
Ensure correct mixing ratios of paint, hardener, and thinner. Verify ambient temperature and humidity are within recommended application ranges. Incomplete mixing can inhibit curing.
Poor adhesion or peeling
The surface may not have been adequately prepared. Ensure the chassis is clean, dry, and free from rust, grease, or old coatings. Proper priming may be necessary for certain substrates.
Uneven finish or runs
Adjust spray gun settings (pressure, fan width, fluid tip) for the chosen application method. Apply thin, even coats rather than a single thick one. Ensure consistent movement during application.
Coating is too thick or viscous
Add the specified amount of thinner if the product is too viscous for the application method. Do not exceed recommended thinner ratios, as this can compromise coating integrity.
Pros and Cons
Pros
- Excellent durability and protection for heavy-duty vehicle chassis.
- Active corrosion resistance due to zinc phosphate content.
- Broad adhesion to common chassis materials like steel and aluminum.
- Fast drying time minimizes downtime during application.
- Resistant to UV, weather, and solvents for long-lasting finish.
Cons
- Requires careful mixing of two components (paint and hardener) plus thinner.
- Specific application knowledge may be needed for optimal results across different methods.
- High-temperature tolerance is for short-term exposure only.
- The semi-gloss finish may not be suitable for all aesthetic preferences.
Setup, Compatibility & Care Instructions
Setup:
This is a 2K (two-component) product. It requires the precise mixing of the paint base, hardener, and thinner according to the manufacturer's specified ratios. Ensure a well-ventilated area for mixing and application.
Compatibility:
- Surfaces: Bonds well to properly prepared steel, galvanized steel, and aluminum.
- Application Methods: Suitable for electrostatic, Airmix, Airless spray guns, and brush application.
Care:
- Clean application tools immediately after use with an appropriate solvent.
- Avoid abrasive cleaning methods on the coated surface to preserve the finish.
- Regularly inspect the chassis for any signs of damage that may require touch-up.