FabioT. Chassis Paint - 5500ml - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This high-build polyurethane acrylic coating is designed for professionals seeking durable, heavy-duty protection for truck and commercial vehicle chassis. Its key benefit is the reinforced zinc phosphate for active corrosion resistance, ensuring longevity in harsh environments. A potential caveat is the need for proper ventilation and personal protective equipment due to its professional-grade formulation. The 5.50L kit includes paint, hardener, and thinner, offering a semi-gloss finish with excellent weather, UV, and solvent resistance.
All features
| Colour | Green |
|---|---|
| Model Part Number | FT-PU265-P3.81L-H0.95L-T0.74L-SG-UC |
| Brand | FabioT. |
| Container Volume | 5500ml |
Extended Product Information
FAQs
What is the shelf life of this product?
Unmixed components have a typical shelf life of 12 months when stored in a cool, dry place in their original, sealed containers. Refer to product packaging for specific expiry dates.
What is the recommended application thickness?
The recommended dry film thickness (DFT) is typically between 50-100 microns per coat. Consult the product's technical data sheet for precise recommendations based on application method.
Can this coating be applied over existing paint?
Yes, provided the existing paint is sound, clean, and properly prepared (e.g., lightly abraded and degreased). Compatibility with the existing paint system should be confirmed.
What is the pot life after mixing?
The pot life (working time) of the mixed product is typically 2-3 hours at 20°C. This can be reduced in warmer temperatures. Do not use material that has exceeded its pot life.
How should I clean my application equipment?
Clean spray guns and other equipment immediately after use with an appropriate solvent thinner as recommended by the manufacturer to prevent the coating from curing in the equipment.
Is this product suitable for interior chassis applications?
While designed for heavy-duty protection, its robust formulation and potential for solvent release during curing mean it is best suited for applications where ventilation is adequate. For interior applications, ensure comprehensive ventilation and safety measures are in place.
What is the coverage rate of this product?
The theoretical coverage rate depends on the dry film thickness applied. For example, at 75 microns DFT, coverage is approximately 10-12 square meters per litre of mixed product. This is a guideline and actual coverage will vary with application conditions.
Troubleshooting
Coating not drying properly
Ensure correct mixing ratios of paint, hardener, and thinner. Check ambient temperature and humidity; avoid application in excessively cold or humid conditions. Ensure sufficient induction time after mixing.
Poor adhesion or peeling
Verify that the substrate was properly cleaned and prepared (free of grease, oil, dust). Ensure compatibility with any existing coatings or primers. Surface may have been contaminated during application or drying.
Runs or sags in the finish
Application too thick, or viscosity too low. Reduce the amount of thinner or apply thinner coats. Ensure appropriate spray gun setup and technique.
Surface imperfections (e.g., orange peel)
Adjust spray gun settings (pressure, nozzle size), reduce spray distance, or adjust thinner amount. Ensure paint is mixed thoroughly and has adequate induction time.
Pros and Cons
Pros
- Exceptional corrosion and rust prevention due to zinc phosphate.
- Durable, high-build formula protects against physical damage and environmental factors.
- Excellent resistance to UV, weather, and solvents ensures long-term performance.
- Strong adhesion to a variety of common chassis materials.
- Fast drying times improve application efficiency.
Cons
- Requires proper ventilation and personal protective equipment (PPE) for safe application.
- Professional-grade product, may require experience for optimal results.
- Full cure takes 7-8 days, necessitating patience before heavy use.
- Specific thinner included in the kit may limit options if a different type is preferred.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) system that requires mixing the paint, hardener, and thinner in the specified ratios. Ensure a well-ventilated area and wear appropriate PPE, including a respirator, gloves, and eye protection. Mix thoroughly using a mechanical stirrer or by hand for several minutes until a uniform consistency is achieved. Allow for a brief induction time as recommended by the manufacturer before application.
Compatibility: The coating is designed to adhere strongly to properly prepared surfaces of steel, galvanised steel, and aluminium. Ensure all surfaces are clean, dry, and free from grease, oil, and existing contaminants. For optimal adhesion and performance, a compatible primer is recommended for bare metal surfaces.
Care: To maintain the protective qualities of the finish, clean the chassis regularly with mild detergents and water. Avoid using abrasive cleaners or solvents that could damage the coating. Inspect the chassis periodically for any signs of wear or damage, and address them promptly by re-coating the affected areas after proper surface preparation to prevent further corrosion.