FabioT. FT Paints Chassis Paint - 5.50 L - Moss Green - Satin Gloss Finish
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for owners and operators of heavy-duty trucks and commercial vehicles seeking a durable, protective coating for chassis. The key benefit is robust, long-lasting protection against corrosion and environmental damage, leading to extended vehicle lifespan and reduced maintenance. A minor caveat is the need for proper ventilation and protective gear during application due to its professional-grade formulation. The FabioT. FT Paints Chassis Paint is a high-build polyurethane acrylic coating, reinforced with zinc phosphate for active corrosion protection, delivering a semi-gloss finish with excellent resistance to weather, UV, and solvents.
All features
| Colour | Green |
|---|---|
| Model Part Number | RT 2K PU265 HS |
| Brand | FT Paints |
| Container Volume | 5500 |
Extended Product Information
FAQs
What is the shelf life of the paint and hardener?
The shelf life depends on storage conditions. Unopened, properly stored products typically have a shelf life of at least one year. Refer to the product packaging or manufacturer's documentation for specific dates and storage recommendations.
Can this paint be applied in cold weather?
Application in very cold temperatures can significantly affect drying and curing times, and may compromise the final film properties. It is generally recommended to apply within the temperature range specified on the product's Technical Data Sheet, typically above 10°C (50°F).
How much thinner should I add?
The amount of thinner to add depends on the application method and ambient conditions. Always refer to the Technical Data Sheet for recommended thinning ratios. Over-thinning can negatively impact film build and performance.
Is this paint suitable for painting the entire vehicle body?
This product is specifically formulated as a chassis topcoat for heavy-duty protection. While it offers durable protection, its semi-gloss finish and formulation may not be ideal for the exterior body panels of vehicles where a different aesthetic or specific OEM specifications are required.
What is the recommended recoat time?
The recoat time depends on temperature and humidity. Generally, you can recoat within the 'recoat window' specified on the Technical Data Sheet. Applying too soon or too late can affect adhesion between coats.
How do I clean up application equipment?
Clean tools and equipment immediately after use with appropriate solvent, typically a polyurethane-grade thinner. Dried paint can be difficult to remove.
Troubleshooting
Paint is not drying properly or remains tacky.
Ensure the correct hardener-to-paint ratio was used and thoroughly mixed. Check ambient temperature and humidity; application in cold or very humid conditions can slow curing. Ensure sufficient ventilation.
Poor adhesion or peeling after application.
The surface may not have been adequately cleaned or prepared before application. Ensure the substrate was free of grease, oil, or rust, and properly abraded if necessary.
Uneven finish or visible brush marks.
This could be due to incorrect application technique, using the wrong type or size of brush, or applying the paint too thickly. Ensure consistent strokes and appropriate thinning if necessary, following the manufacturer's guidelines.
Bubbling or pinholing in the coating.
Bubbles can result from trapped moisture or air during application, or from improper mixing. Ensure adequate surface preparation and smooth application. Check for excessive air pressure if using spray methods.
Pros and Cons
Pros
- Provides superior, long-lasting protection for vehicle chassis.
- Excellent resistance to corrosion, weather, UV, and solvents.
- Enhances the aesthetic appeal with a professional semi-gloss finish.
- Suitable for a wide range of metal surfaces.
- Can withstand high temperatures encountered in certain operating conditions.
Cons
- Requires proper ventilation and personal protective equipment during application.
- Full cure takes 7-8 days, requiring patience before heavy use.
- As a 2K product, it requires precise mixing of paint and hardener.
- Not suitable for interior or non-automotive applications without specific testing.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the surface is clean, dry, and free from contaminants like grease, oil, or old paint. Prepare metal surfaces by abrading if necessary for optimal adhesion.
- Carefully mix the paint (3.81L), hardener (0.95L), and thinner (0.74L) in the recommended ratio provided with the kit. Stir thoroughly until a uniform consistency is achieved. *Always refer to the product's Technical Data Sheet for precise mixing ratios and induction times.* Use appropriate personal protective equipment (PPE), including gloves, eye protection, and respiratory protection, especially when working in enclosed spaces.
- Apply using a suitable method: electrostatic, Airmix, Airless, or brush.
Compatibility:
This product is designed for application on:
- Steel
- Galvanised Steel
- Aluminium
It is a 2K polyurethane acrylic coating and should not be mixed with incompatible coatings or thinners. Always test on a small, inconspicuous area if unsure.
Care:
- To maintain the finish, wash the chassis regularly with mild detergent and water. Avoid abrasive cleaners or high-pressure washing directly on coated areas.
- Inspect for damage periodically and touch up as needed following the application guidelines.
- Store unused, properly sealed product in a cool, dry place away from direct sunlight and extreme temperatures.