FabioT. FT Paints 2K PU265 HS Chassis Paint - 20000ml - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and serious DIYers working on truck and commercial vehicle chassis. The FabioT. FT Paints 2K PU265 HS Chassis Paint in Green offers a high-build, semi-gloss finish with exceptional durability and corrosion protection. While its robust formula provides excellent resistance, it requires proper ventilation and safety precautions during application.
All features
| Colour | Green |
|---|---|
| Model Part Number | 2K PU265 HS |
| Brand | FabioT. |
| Container Volume | 20000ml |
Extended Product Information
FAQs
What is the shelf life of the paint kit?
The shelf life depends on storage conditions. Store in a cool, dry place away from direct sunlight. Refer to the product packaging for specific 'use by' dates.
Can this paint be applied over existing paint?
Yes, provided the existing paint is sound, clean, and properly prepared (e.g., sanded and degreased). Compatibility with very old or unknown coatings should be tested on a small area first.
How much thinner should I add?
The amount of thinner depends on the application method, temperature, and desired viscosity. Consult the product's technical data sheet for specific recommendations for electrostatic, Airmix, Airless, or brush application.
What safety precautions are necessary?
Always work in a well-ventilated area. Wear appropriate personal protective equipment (PPE), including solvent-resistant gloves, safety glasses or goggles, and a respirator approved for organic vapors and particulates.
How long does it take for the chassis to be ready for use?
The coating is dust-dry in 15-30 minutes, but a full cure takes 7-8 days under standard conditions. Avoid heavy use or exposure to harsh elements until full cure is achieved.
Is this product suitable for indoor chassis applications?
While the product provides excellent protection, its application requires significant ventilation due to the nature of 2K coatings. It is best suited for environments where professional spray booths or adequate outdoor ventilation can be utilized.
Troubleshooting
Paint not drying or curing properly
Ensure the correct mixing ratio of paint, hardener, and thinner. Verify ambient temperature and humidity are within recommended ranges. Check if the product has passed its shelf life.
Poor adhesion to the surface
Ensure the substrate was properly cleaned, degreased, and prepared (e.g., lightly abraded if necessary). Check for contamination on the surface before application.
Uneven finish or "orange peel"
Adjust spray gun settings (pressure, nozzle size, fan width) and application technique. Ensure correct viscosity by using the appropriate amount of thinner for the application method and temperature.
Runs or sags in the coating
Apply thinner coats rather than one heavy coat. Reduce the amount of thinner used, if excessive. Increase spraying distance or reduce speed.
Pros and Cons
Pros
- Provides excellent long-lasting protection for heavy-duty chassis.
- Offers superior resistance to environmental factors and chemicals.
- The semi-gloss finish is both aesthetically pleasing and practical for maintenance.
- Fast drying times minimize downtime during application.
- Suitable for a variety of application techniques, offering flexibility.
Cons
- Requires proper safety equipment due to potential fumes and chemical exposure.
- Full cure takes 7-8 days, meaning the chassis cannot be fully utilized immediately.
- A 20000ml kit is a large volume, potentially excessive for smaller projects.
- Requires specific thinners and hardeners for optimal performance, not typically included in basic kits.
Setup, Compatibility & Care
Setup: This is a two-component (2K) system requiring mixing of paint, hardener, and potentially thinner. Ensure the correct ratios are used as per the product data sheet. Optimal application occurs in temperatures between 10°C and 30°C with relative humidity below 70%. Prepare surfaces by cleaning and degreasing thoroughly. Light abrasion may be necessary for optimal adhesion on some substrates.
Compatibility: The coating is designed to bond reliably to prepared steel, galvanized steel, and aluminum surfaces. It is compatible with electrostatic, Airmix, Airless, and brush application methods. Always use recommended thinners for the specific application method and environmental conditions.
Care: Once fully cured, the surface is durable and resistant. Clean with mild detergents and water. Avoid abrasive cleaners or solvents that could damage the finish. Regular inspection for any damage is recommended to address potential issues promptly.