FabioT. Chassis Paint - 5500ml - Sky Blue
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for vehicle maintenance professionals and fleet owners needing robust chassis protection. The key benefit is superior, long-lasting defense against corrosion and environmental damage for trucks and commercial vehicles. A caveat is that proper surface preparation and mixing are crucial for optimal performance. The FabioT. Chassis Paint is a high-build, 2K polyurethane acrylic coating designed for heavy-duty use, offering semi-gloss protection reinforced with zinc phosphate for active rust prevention, alongside excellent resistance to weather, UV, and solvents. The 5500ml kit includes paint, hardener, and thinner.
All features
| Colour | Blue |
|---|---|
| Model Part Number | 2K PU265 |
| Brand | FabioT. |
| Container Volume | 5500ml |
Extended Product Information
FAQs
What is the typical pot life of the mixed paint?
Pot life varies depending on temperature, but it is typically a limited time after mixing the paint, hardener, and thinner. Refer to the product data sheet for specific times.
Can this paint be applied in cold weather?
It is best to apply the paint within the recommended temperature range specified by the manufacturer to ensure proper curing and adhesion. Cold temperatures can significantly affect drying and curing times.
How do I clean up application equipment?
Clean spray guns, brushes, and other equipment immediately after use with a suitable solvent recommended for polyurethane coatings.
What is the expected durability of this coating?
The coating offers durable, long-lasting protection due to its high-build polyurethane acrylic formula and zinc phosphate reinforcement, designed for heavy-duty chassis protection.
What is the sheen of the final finish?
The finish is a semi-gloss.
Can this paint be used on aluminum surfaces?
Yes, the coating bonds reliably to aluminium surfaces when properly prepared.
What is the coverage rate?
Coverage rate depends on the application method and film thickness. Consult the product's technical data sheet for specific coverage estimates.
Troubleshooting
Coating is not adhering properly
Ensure the surface was thoroughly cleaned, degreased, and adequately prepared (e.g., abraded). Verify the correct mixing ratios of paint, hardener, and thinner were used.
Uneven or rough finish
Check for proper spray gun setup, correct viscosity, and consistent application technique. Ensure adequate ventilation during application.
Paint remains tacky after application
Verify that the correct hardener was used and mixed in the proper ratio. Ensure application occurred within the recommended temperature and humidity range. Check the pot life of the mixed product.
Poor coverage
Ensure the paint is applied at the recommended film thickness. Check for blockages in the spray equipment. Mix the product thoroughly before and during application.
Pros and Cons
Pros
- Provides excellent long-term protection against corrosion and environmental wear.
- Durable semi-gloss finish enhances appearance and resists fading.
- Fast drying times reduce vehicle downtime.
- Suitable for a wide range of application methods.
- Strong adhesion to common chassis materials.
Cons
- Requires careful surface preparation for optimal adhesion.
- Mixing of paint, hardener, and thinner is critical and must be done accurately.
- A full cure takes several days, requiring patience before heavy use.
- May require specific safety equipment due to its chemical composition.
Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and free from contaminants like grease, oil, and rust. Abrade surfaces for optimal adhesion.
- Accurately mix the paint, hardener, and thinner according to the specified ratios (refer to product data sheet for exact proportions). Stir thoroughly until homogenous.
- Apply using a suitable method (electrostatic, Airmix, Airless, or brush) at the recommended temperature.
Compatibility:
- Bonds reliably to prepared steel, galvanised steel, and aluminium surfaces.
- Suitable for use with electrostatic, Airmix, Airless, and brush application equipment.
Care:
- Clean application equipment immediately after use with a suitable solvent.
- Avoid abrasive cleaning methods on the coated surface after curing.
- For maintenance, use mild detergents and water. Wipe dry.