FabioT. FT Paints Chassis Paint - 400ml - Signal Yellow
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for vehicle owners, fleet managers, and auto body professionals seeking a durable, high-performance coating for truck and commercial vehicle chassis. The key benefit is its robust protection against corrosion and environmental damage, ensuring longevity. A potential caveat is its specific formulation for chassis protection, which may not be ideal for all automotive surfaces. The FabioT. FT Paints Chassis Paint is a 2K polyurethane acrylic coating designed for heavy-duty applications, offering a semi-gloss finish with excellent resistance properties and strong adhesion.
All features
| Colour | Yellow |
|---|---|
| Model Part Number | FT-PU265-400AER-SG-TC |
| Brand | FT Paints |
| Container Volume | 400ml |
Extended Product Information
FAQs
What surfaces can this chassis paint be applied to?
The paint bonds reliably to steel, galvanised steel, and aluminium surfaces. Proper surface preparation is crucial for all materials.
How long does it take for the paint to fully cure?
Under standard conditions, the paint achieves full cure in approximately 7-8 days. It is dust-dry in 15-30 minutes.
Can I use this paint on other parts of a vehicle besides the chassis?
While designed for heavy-duty chassis protection, it can be used on other metal components requiring similar durable, corrosion-resistant coating. However, test in an inconspicuous area if unsure.
What is the heat resistance of this coating?
The coating can withstand short-term exposure to temperatures up to 180°C, making it suitable for components that experience heat.
Is this product suitable for DIY application?
Yes, with proper preparation and safety precautions, it can be applied using spray or brush methods. Ensure adequate ventilation and use personal protective equipment.
How should I store the unused product?
Store in a cool, dry place away from direct sunlight and sources of ignition. Ensure the container is tightly sealed.
Does the 400ml size come as a complete kit?
The product information specifies a 'Kit Bundle: 400ml Aerosol'. This implies it is a ready-to-use aerosol can.
Troubleshooting
Poor adhesion or peeling
Ensure the surface was properly prepared (clean, dry, abraded) and free from contaminants. Check for compatibility issues with underlying coatings.
Uneven finish or runs
Adjust spray technique, distance, or pressure. Ensure correct viscosity for the application method. Avoid over-application in one coat.
Slow drying or curing
Ensure application within recommended temperature and humidity ranges. Thicker coats may take longer to cure. Verify product has not expired.
Bubbling or blistering
Ensure moisture or contaminants were not present during application. Check for incompatible solvents. Apply in thin, even coats.
Pros and Cons
Pros
- Provides excellent, long-lasting protection for vehicle chassis.
- Offers strong resistance to corrosion, weather, UV, and solvents.
- Achieves a professional-looking finish with good coverage.
- Fast drying times improve application efficiency.
- Suitable for application on various metal surfaces.
Cons
- Requires specific application methods for optimal results.
- Formulated primarily for chassis and may not be suitable for all vehicle parts.
- Requires proper ventilation and personal protective equipment during use.
- Full cure takes several days, during which it should be protected.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from grease, oil, rust, and old paint. For best results, abrade surfaces before application. For bare steel, consider a suitable primer.
Application Methods: This product is versatile and can be applied using electrostatic, Airmix, Airless spray, or brush methods. Ensure consistent application thickness for optimal protection. Refer to the product's technical data sheet for specific spraying pressures and nozzle recommendations for each method.
Compatibility: Bonds reliably to steel, galvanised steel, and aluminium. Ensure compatibility with any primers or undercoats used.
Care: Once fully cured, the coating is durable and requires minimal care beyond routine vehicle cleaning. Avoid abrasive cleaners or tools that could scratch the surface. For cleaning, a mild detergent and water solution is recommended.