Ft Paints Chassis Paint - 2750ml - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for vehicle owners and professional detailers looking to protect and enhance the chassis of trucks and commercial vehicles. The key benefit is durable, long-lasting protection against corrosion and the elements with a professional semi-gloss finish. A potential caveat is the need for proper application techniques and ventilation due to its chemical composition. The product is a high-build polyurethane acrylic coating, available in a 2.75L kit, designed for heavy-duty chassis protection. It features a semi-gloss finish and offers excellent resistance to weather, UV, and solvents.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 2K PU265 |
| Brand | FT Paints |
| Container Volume | 2750ml |
Extended Product Information
FAQs
What is the shelf life of the product?
Refer to the product packaging or manufacturer's technical data sheet for specific shelf life information. Store in a cool, dry place away from direct sunlight.
How much area does a 2.75L kit cover?
Coverage varies based on application thickness and method. Consult the product's technical data sheet for estimated coverage rates.
Can this be used on car chassis?
While designed for heavy-duty trucks and commercial vehicles, it can be used on car chassis if similar heavy-duty protection is required and the surface is properly prepared. However, its finish might be coarser than typical automotive finishes.
What is the recommended temperature for application?
The recommended application temperature range is typically between 10°C and 30°C. Refer to the technical data sheet for precise environmental conditions.
How long should I wait before washing the vehicle?
Allow the coating to fully cure for the recommended period (7-8 days) before subjecting the chassis to high-pressure washing or aggressive cleaning agents.
Do I need a primer?
For optimal adhesion and corrosion protection, especially on bare steel or aluminium, a compatible primer is recommended. Check the manufacturer's guidelines for specific primer recommendations.
Is this product available in other colours?
Yes, this product line is available in various colours, including Green, Grey, and Red, with different kit sizes.
Troubleshooting
Paint is not drying properly
Check the mixing ratio of paint, hardener, and thinner. Ensure application temperature is within the recommended range and humidity levels are not too high. Verify that the correct hardener for this specific product was used.
Poor adhesion to the surface
The surface may not have been adequately prepared. Ensure it was clean, dry, and free from rust, grease, or old coatings. A proper primer might be necessary for certain substrates.
Uneven or rough finish
Adjust spray gun settings (pressure, nozzle size) or application technique. Ensure consistent distance from the surface and maintain a steady movement. Check for blockages in the spray equipment.
Visible brush marks
If applying by brush, use a high-quality brush suitable for polyurethane paints. Apply thin, even coats and avoid over-brushing. Consider using a roller or spray application for a smoother finish.
Pros and Cons
Pros
- Provides robust, long-lasting protection for vehicle chassis.
- Excellent resistance to corrosion, weather, UV, and solvents.
- Suitable for a variety of application methods.
- Fast drying time improves workflow efficiency.
- Enhances the aesthetic appeal with a professional semi-gloss finish.
- Effective adhesion on multiple metal substrates.
Cons
- Requires proper ventilation during application due to its formulation.
- Full cure takes 7-8 days, necessitating careful handling during this period.
- Application may require specialized equipment for optimal results (e.g., spray gun).
- Not suitable for interior or non-automotive applications.
- Requires a hardener and thinner, sold as a kit.
Setup, Compatibility & Care
Setup:
This product is a kit that includes paint, hardener, and thinner. Ensure all components are mixed in the correct ratios as specified by the manufacturer's technical data sheet before application. Stir thoroughly.
Compatibility:
Suitable for application on properly prepared steel, galvanised steel, and aluminium surfaces. It is designed for use on truck and commercial vehicle chassis.
Care:
- Ensure surfaces are clean, dry, and free from contaminants before application.
- Apply in a well-ventilated area, wearing appropriate personal protective equipment (PPE).
- Allow the recommended drying and curing times before exposing the chassis to heavy use or extreme conditions.
- Clean application equipment immediately after use with an appropriate solvent.