FabioT. FT Paints Chassis Paint Kit - 20000ml - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This high-build polyurethane acrylic coating is designed for heavy-duty protection of truck and commercial vehicle chassis. It offers exceptional durability and a professional semi-gloss finish, crucial for maintaining vehicle appearance and preventing corrosion. A potential consideration is the multi-component nature requiring careful mixing and application.
All features
| Colour | Black |
|---|---|
| Model Part Number | FT-PU265-P13.8L-H3.4L-T2.8L-SG-SS |
| Brand | FabioT. |
| Container Volume | 20000ml |
Extended Product Information
FAQs
What is the mixing ratio for the paint, hardener, and thinner?
The specific mixing ratio is detailed in the product's technical data sheet. It is crucial to follow these instructions precisely for optimal performance and curing. Typically, it involves a specific volume of paint, hardener, and thinner.
What surfaces can this chassis paint be applied to?
This coating is designed to bond reliably to properly prepared steel, galvanized steel, and aluminum surfaces.
How long does it take for the paint to fully cure?
The paint achieves dust-dry in 15-30 minutes, but a full cure, meaning it reaches its maximum hardness and chemical resistance, takes approximately 7-8 days under standard conditions.
Can this paint be applied with a brush?
Yes, this coating is versatile and suitable for application via electrostatic, Airmix, Airless, and brush methods.
What is the temperature resistance of the coating?
The coating can withstand short-term exposure to temperatures up to 180°C.
Does the '20000ml' refer to the total volume of the kit?
Yes, the 20000ml (20.0L) refers to the total kit bundle, which includes the paint, hardener, and thinner in their specified volumes (e.g., 13.8L Paint, 3.4L Hardener, 2.8L Thinner).
Is this paint suitable for automotive bodywork or just chassis?
This product is specifically formulated as a high-build polyurethane acrylic coating for heavy-duty protection of truck and commercial vehicle chassis. It is not intended for general automotive bodywork.
Troubleshooting
Paint not drying or curing properly
Ensure the correct ratio of paint, hardener, and thinner was used. Verify that the ambient temperature and humidity are within the recommended application range. Insufficient mixing can also impede curing.
Poor adhesion to the surface
The surface may not have been properly prepared. Ensure it was clean, dry, and free from contaminants like grease or oil. Lightly abrading the surface before application can improve adhesion.
Uneven or streaky finish
This can be due to incorrect application technique, wrong viscosity, or inadequate mixing. Ensure consistent spray patterns and proper stirring. Dilution with the correct thinner may be required to achieve the right viscosity for the application method.
Coating sagging or running
This usually occurs when too much material is applied in one coat. Apply thinner, more even coats. Allow adequate flash-off time between coats as per the product's technical data sheet.
Pros and Cons
Pros
- Provides excellent, long-lasting protection for commercial vehicle chassis.
- Superior resistance to environmental factors like UV, weather, and solvents.
- Enhances vehicle appearance with a smooth, professional semi-gloss finish.
- Actively prevents corrosion due to zinc phosphate reinforcement.
- Versatile application methods including electrostatic, spray, and brush.
Cons
- Requires careful mixing of paint, hardener, and thinner for optimal performance.
- Full cure takes 7-8 days, requiring patience before heavy use.
- Professional application may be recommended for best results, especially with spray methods.
- The 20L kit size may be excessive for smaller projects.
- Requires specific safety precautions during application due to its chemical composition.
Setup, Compatibility & Care Instructions
Setup: This product is a kit that requires mixing. Ensure you have the correct proportions of paint, hardener, and thinner as specified in the technical data sheet. Stir thoroughly before and during application. Clean all application equipment immediately after use.
Compatibility: The coating adheres well to properly prepared steel, galvanized steel, and aluminum surfaces. Ensure surfaces are clean, dry, and free from grease, oil, and contaminants. Existing coatings should be well-adhered and may require light abrasion for optimal grip.
Care: To maintain the finish, wash the chassis regularly with mild detergents and water. Avoid abrasive cleaners or high-pressure washing directly on coated seams. Inspect periodically for any signs of damage and touch up as needed.