Ft Paints Chassis Paint - Green - 1.10 L Kit
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for owners and mechanics of trucks and commercial vehicles looking for a durable, corrosion-resistant coating for chassis. The key benefit is robust protection against rust and environmental damage, ensuring longevity. A caveat to consider is the need for proper ventilation and protective equipment during application due to its professional-grade formulation. The Ft Paints RT 2K PU265 HS Chassis Topcoat is a high-build polyurethane acrylic coating designed for heavy-duty protection. It features zinc phosphate for active corrosion resistance and a semi-gloss finish offering excellent weather, UV, and solvent resistance. This 1.10L kit includes paint, hardener, and thinner for a complete solution.
All features
| Colour | Green |
|---|---|
| Model Part Number | FT-PU265-P0.76L-H0.19L-T0.15L-S-SS |
| Brand | FT Paints |
| Container Volume | 1100 |
Extended Product Information
FAQs
What is the coverage rate of this paint?
Coverage varies based on application method and surface porosity, but a general guideline for high-build coatings is around 8-10 square meters per liter at the recommended dry film thickness.
Can this paint be applied in cold weather?
Application is best between 10°C and 30°C. Performance and drying times can be significantly affected by temperatures below 10°C. Consult the product's technical data sheet for specific low-temperature application guidelines.
How long does the mixed paint remain usable?
The pot life (the time the mixed paint remains usable) is typically 2-4 hours at 20°C. This can be reduced by higher temperatures. Only mix what you can use within this period.
What personal protective equipment (PPE) is required?
Due to the nature of 2K polyurethane coatings, it is essential to use appropriate PPE, including a respirator with organic vapor cartridges, chemical-resistant gloves, safety glasses or goggles, and protective clothing. Ensure adequate ventilation.
Can I apply this over existing paint?
Yes, it can be applied over existing well-adhered coatings provided they are suitable and properly prepared. Light abrasion and cleaning are usually recommended. It's always best to test on an inconspicuous area first.
What thinner should be used?
The kit includes a specific thinner. If additional thinner is required, use only a compatible polyurethane-grade thinner recommended by FT Paints to ensure optimal performance and finish.
Is this paint available in other colors or sizes?
Yes, the RT 2K PU265 HS range is available in various colors, including blue, grey, and black, and in different kit sizes. Please check the product listings for available options.
Troubleshooting
Paint not drying or curing properly
Verify that the correct hardener ratio was used and that the components were mixed thoroughly. Ensure application temperature and humidity are within the recommended range. Insufficient ventilation can also slow down curing.
Poor adhesion to the surface
The surface may not have been adequately prepared. Ensure it was clean, dry, and free from contaminants like grease or oil. Re-prep the surface and consider using an appropriate primer if necessary.
Uneven or rough finish
Check spray equipment settings (pressure, nozzle size) and technique. Ensure the paint was mixed to a uniform consistency and strain if necessary. Proper surface preparation is also key to a smooth finish.
Runs or sags in the coating
This is often due to applying the paint too thickly or at incorrect spray gun speed. Apply in thinner, even coats and allow adequate flash-off time between coats if necessary.
Pros and Cons
Pros
- Excellent corrosion and rust protection due to zinc phosphate.
- Durable, high-build formula designed for demanding environments.
- Resistant to UV, weathering, and solvents for extended lifespan.
- Bonds well to various metal surfaces.
- Fast drying enhances application efficiency.
Cons
- Requires specific hardener and thinner for use (included in kit).
- Application may require professional equipment and expertise.
- Full cure takes several days, impacting immediate heavy use.
- Needs proper ventilation and protective gear due to its chemical nature.
Setup, Compatibility & Care
Setup: This product is a 2K (two-component) system. Ensure you mix the paint, hardener, and thinner in the correct ratios as specified by the manufacturer before application. Typically, this involves mixing 0.76L of paint with 0.19L of hardener and 0.15L of thinner for the 1.10L kit. Stir thoroughly until a homogeneous mixture is achieved.
Compatibility: The RT 2K PU265 HS Chassis Topcoat demonstrates strong adhesion to properly prepared surfaces, including:
- Steel
- Galvanised Steel
- Aluminium
Ensure surfaces are clean, dry, and free from grease, oil, and existing contaminants. Mechanical abrasion or suitable primers may be required for optimal adhesion.
Care:
- Storage: Store in a cool, dry place away from direct sunlight and sources of ignition. Keep containers tightly sealed.
- Cleaning (Post-Application): Once fully cured, the surface can be cleaned with standard automotive cleaning agents. Avoid abrasive cleaners that could damage the semi-gloss finish.
- Maintenance: Regularly inspect the chassis for any signs of damage or wear and touch up as needed following the same preparation and application guidelines.