Ft Paints 20.0 L Kit Chassis Paint - Black - Semi Gloss Finish
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 20.0L kit of Ft Paints RT 2K PU265 HS Chassis Topcoat in Black is designed for professionals and serious DIYers needing heavy-duty protection for truck and commercial vehicle chassis. Its key benefit is exceptional durability and corrosion resistance, offering a long-lasting semi-gloss finish. A minor caveat is the need for proper ventilation and protective gear due to its industrial formulation.
All features
| Colour | Black |
|---|---|
| Model Part Number | FT-PU265-P13.8L-H3.4L-T2.8L-S-SS |
| Brand | FT Paints |
| Container Volume | 20000 |
Extended Product Information
FAQs
What is the shelf life of this product?
Unmixed components typically have a shelf life of 12 months when stored in cool, dry conditions in their original sealed containers. Refer to the product's technical data sheet for specific details.
What safety precautions should I take when using this product?
Always use in a well-ventilated area. Wear appropriate personal protective equipment, including chemical-resistant gloves, eye protection (goggles or face shield), and a respirator suitable for organic vapors and particulates.
Can I apply this paint over existing paint?
Yes, provided the existing paint is sound, clean, and properly prepared. For best results and maximum adhesion, it is recommended to apply over a compatible primer. Remove any loose or flaking paint.
What is the recommended application thickness?
The recommended dry film thickness (DFT) for optimal performance is typically between 75-100 microns per coat. Refer to the product's technical data sheet for precise recommendations based on application method.
How long does it take to fully cure?
The paint will be dust-dry in 15-30 minutes under standard conditions. However, it requires approximately 7-8 days to achieve a full, hard cure before it can withstand heavy use or exposure to harsh conditions.
Can I use a different thinner if I run out of the included one?
It is highly recommended to use only the thinner provided in the kit or one specifically recommended by FT Paints for this product. Using an incorrect thinner can negatively affect drying, adhesion, and finish quality.
What is the coverage rate of this kit?
The coverage rate depends on the application thickness and method. A general estimate for a high-build coating like this is typically around 8-10 square meters per liter at the recommended film thickness. The 20.0L kit (13.8L paint) should provide significant coverage for large chassis projects.
Troubleshooting
Paint not drying properly
Ensure the correct ratio of paint, hardener, and thinner has been used. Check ambient temperature and humidity, as low temperatures or high humidity can slow curing. Ensure adequate ventilation.
Poor adhesion or peeling
Surface preparation is critical. Ensure the surface was thoroughly cleaned, degreased, and free from rust or contaminants before application. A compatible primer may be necessary.
Uneven or rough finish
Check application technique and equipment settings. Ensure consistent spray patterns if using spray methods. Stir the paint thoroughly during application. Viscosity may need adjustment with the correct thinner.
Rust spots appearing
This indicates insufficient coating thickness or a breach in the protective layer. Ensure full coverage, especially in crevices and welds. Reapply if necessary after ensuring the surface is clean and dry.
Pros and Cons
Pros
- Provides robust, long-lasting protection for heavy-duty applications.
- Excellent resistance to corrosion, UV, and solvents ensures durability.
- Fast drying time improves application efficiency.
- Suitable for a wide range of professional application methods.
- High-build formula offers superior coverage and a smooth finish.
Cons
- Requires proper safety equipment and ventilation due to its industrial nature.
- Full cure takes 7-8 days, requiring patience before heavy use.
- Not suitable for interior residential use.
- Requires a specific hardener and thinner included in the kit.
- May require specialized equipment for optimal application with certain methods.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) system. Ensure you have the correct ratio of paint, hardener, and thinner as specified by the manufacturer for optimal performance. Mix thoroughly before application.
Compatibility: This coating is designed to adhere strongly to steel, galvanised steel, and aluminium. Ensure surfaces are clean, dry, and free from contaminants, grease, or rust before application. For best results, use with appropriate primers designed for automotive chassis applications.
Care: Once fully cured (7-8 days), the coating is highly durable. Clean surfaces with mild detergents and water. Avoid abrasive cleaners or solvents that could damage the finish. Regular washing will help maintain its appearance and protective qualities.