Ft Paints Chassis Paint - 5500ml - Blue
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Ft Paints RT 2K PU265 HS Chassis Topcoat in Blue is designed for owners of trucks and commercial vehicles seeking robust, long-lasting protection for their chassis. Its key benefit is superior durability and corrosion resistance, especially in harsh environments. A caveat is the need for proper ventilation and safety equipment during application due to its 2K (two-component) nature. This high-build polyurethane acrylic coating offers a semi-gloss finish and incorporates zinc phosphate for active rust prevention, ensuring excellent resistance to weather, UV rays, and solvents.
All features
| Colour | Blue |
|---|---|
| Model Part Number | 2K PU265 HS |
| Brand | FT Paints |
| Container Volume | 5500ml |
Extended Product Information
FAQs
What is the shelf life of the mixed product?
The pot life of the mixed product is typically limited, usually around 2-3 hours at 20°C. Refer to the product's technical data sheet for the exact pot life, as it can vary with temperature.
Can this be applied over existing paint?
Yes, it can be applied over existing, sound paintwork that has been properly cleaned and prepared. For best results, light abrasion might be recommended. Always check the technical data sheet for compatibility with specific existing coatings.
What safety precautions are necessary when using this product?
This is a 2K product and requires a well-ventilated area. Wear appropriate personal protective equipment (PPE), including chemical-resistant gloves, safety glasses or goggles, and a respirator fitted with organic vapor cartridges. Avoid skin and eye contact.
How should I prepare the surface before applying?
The surface must be clean, dry, and free from grease, oil, rust, and any loose or flaking material. For bare metal, degreasing and mechanical abrasion are recommended, potentially followed by a compatible primer for optimal adhesion and corrosion protection.
What is the recommended application temperature?
The product is typically best applied at temperatures between 10°C and 30°C. Avoid application in direct sunlight, high humidity, or when frost is expected. Refer to the technical data sheet for precise temperature ranges.
Can I thin this product if it's too thick?
Yes, this product can be thinned with a compatible polyurethane thinner. The amount of thinner to use depends on the application method and ambient conditions, but typically ranges from 5-15%. Always consult the technical data sheet for specific recommendations.
What is the coverage rate?
The coverage rate varies depending on the application thickness and method. As a general guideline for a high-build coating, a typical coverage rate might be around 6-8 square meters per liter at the recommended dry film thickness. Refer to the product's technical data sheet for precise figures.
Troubleshooting
Paint not drying or curing properly
Ensure the correct hardener ratio was used and mixed thoroughly. Verify ambient temperature and humidity are within the recommended range for curing. Insufficient mixing or incorrect temperature can significantly slow down or prevent curing.
Poor adhesion or peeling
The surface may not have been adequately prepared. Ensure it was clean, dry, and free from contaminants. Check for compatibility with any previous coatings or primers used. Ensure proper surface abrasion was performed if required.
Runs or sags in the coating
The paint may have been applied too thickly or at an incorrect viscosity. Reduce the amount applied per coat or adjust the thinner amount as per the technical data sheet. Ensure the application method is suitable for the product's viscosity.
Orange peel effect on finish
This can be caused by incorrect spray gun settings (air pressure, nozzle size), spraying too far from the surface, or the paint being too thick. Adjust spray technique, distance, and paint viscosity according to the product's application guidelines.
Pinholes or bubbles in the finish
Check for moisture or contaminants on the surface or in the air supply (if using air-assisted application). Ensure the paint was mixed correctly and allowed to 'flash off' (evaporate solvent) appropriately between coats if necessary. Trapped air or solvent can cause bubbling.
Pros and Cons
Pros
- Provides excellent long-term protection for vehicle chassis.
- Offers robust resistance to environmental factors like UV and moisture.
- Includes active corrosion inhibitors for added durability.
- Suitable for a wide range of application methods.
- Fast drying times improve application efficiency.
Cons
- Requires proper safety equipment (gloves, mask, eye protection) due to its 2K formulation.
- Application requires good ventilation to avoid fumes.
- Full cure takes several days, limiting immediate heavy use.
- Best applied by experienced users familiar with 2K coatings.
- Requires specific thinners for correct viscosity and application.
Setup, Compatibility & Care
Setup: This is a two-component (2K) product that requires mixing the paint, hardener, and thinner in the specified ratios before application. Ensure all components are at room temperature for optimal mixing and application. Use clean mixing containers and tools.
Compatibility: The RT 2K PU265 HS Chassis Topcoat is designed to adhere to properly prepared surfaces of steel, galvanised steel, and aluminium. It is recommended to use a compatible primer for optimal adhesion and protection, especially on bare metal. Always refer to the manufacturer's technical data sheet for specific primer recommendations.
Care:
- Surface Preparation: Ensure the surface to be coated is clean, dry, and free from grease, oil, rust, and old paint. Abrading the surface may be necessary for optimal adhesion.
- Application: Apply in a well-ventilated area. Use appropriate personal protective equipment (PPE), including chemical-resistant gloves, safety goggles, and a respirator suitable for organic vapors.
- Cleaning: Clean application tools immediately after use with the appropriate thinner.
- Storage: Store unused product in tightly sealed containers in a cool, dry place, away from direct sunlight and sources of ignition. Follow recommended pot life guidelines after mixing.