Ft Paints Chassis Paint - 5500ml - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for vehicle maintenance professionals and DIY enthusiasts looking for a durable, protective coating for truck and commercial vehicle chassis. The key benefit is its high-build, corrosion-resistant formula that offers long-lasting protection in harsh environments. A potential caveat is the need for proper ventilation and protective equipment due to its industrial nature. The Ft Paints RT 2K PU265 HS Chassis Topcoat is a semi-gloss, polyurethane acrylic coating designed for heavy-duty applications, featuring zinc phosphate for active rust prevention, excellent resistance to weather, UV, and solvents, and strong adhesion to various metal surfaces.
All features
| Colour | Green |
|---|---|
| Model Part Number | FT-PU265-P3.81L-H0.95L-T0.74L-SG-SS |
| Brand | FT Paints |
| Container Volume | 5500ml |
Extended Product Information
FAQs
What is the shelf life of the RT 2K PU265 HS Chassis Topcoat?
Unopened containers should be stored in a cool, dry place. Refer to the product packaging or FT Paints technical data sheet for specific shelf-life information.
How long does it take to fully cure?
Under standard conditions, the coating achieves dust-dryness in 15-30 minutes and reaches full cure in 7-8 days. Cooler temperatures or higher humidity may extend cure times.
Can this be applied over existing paint?
Yes, provided the existing paint is sound, clean, and properly prepared (e.g., scuffed/sanded). It is best to consult the product's technical data sheet for specific substrate compatibility and preparation advice.
What thinner should be used?
A specific thinner is typically required for 2K polyurethane coatings. Always use the thinner recommended by FT Paints for the RT 2K PU265 HS Chassis Topcoat to ensure optimal performance and compatibility.
Is this product suitable for exterior chassis that are exposed to salt spray?
Yes, the formula is reinforced with zinc phosphate for active corrosion protection and offers outstanding resistance to weather and solvents, making it highly suitable for harsh environments including those with salt spray.
What is the recommended film thickness?
Recommended film thickness varies by application method. Consult the FT Paints technical data sheet for specific dry film thickness (DFT) recommendations to achieve optimal performance and durability.
Can this product be tinted?
This product is available in various colours, but tinting by the end-user is generally not recommended for 2K systems without specific guidance and compatible tinting bases, as it can affect performance and curing properties. Consult with FT Paints for custom colour options.
Troubleshooting
Product not curing properly
Verify correct mixing ratio of paint, hardener, and thinner. Ensure application and curing temperatures are within the recommended range. Check expiry dates of components.
Poor adhesion to surface
Ensure the surface was properly prepared, cleaned, and degreased before application. Re-prime and re-coat if necessary, following surface preparation guidelines.
Uneven or rough finish
Adjust spray gun settings (pressure, fluid tip, fan pattern) or brush technique. Ensure paint viscosity is correct by using the recommended thinner amount. Check for contaminants in the air supply or on the surface.
Runs or sags in the coating
Reduce paint flow rate or increase spray gun speed. Apply thinner coats. Ensure proper paint viscosity and atomization.
Pros and Cons
Pros
- Exceptional durability for heavy-duty chassis protection.
- Excellent corrosion resistance due to zinc phosphate.
- Withstands harsh environmental conditions (weather, UV, solvents).
- Fast drying and application efficiency.
- Versatile application methods to suit user needs.
Cons
- Requires proper ventilation and personal protective equipment (PPE).
- 7-8 day full cure time may be a limitation for urgent projects.
- Professional application may be required for optimal results.
- Not suitable for all plastic or flexible surfaces without proper preparation.
Setup, Compatibility & Care
Preparation is Key: Ensure the surface to be coated is clean, dry, and free from rust, grease, oil, and previous coatings. Abrade surfaces for optimal adhesion. For steel, prepare to bare metal. For galvanized steel and aluminum, use appropriate primers.
Mixing Instructions: This is a 2K (two-component) system. The paint, hardener, and thinner must be mixed in the correct proportions as specified by FT Paints for optimal performance. Typically, this involves mixing the paint and hardener first, then adding the thinner to achieve the desired viscosity for application. Always refer to the product data sheet for precise ratios and induction times.
Application Methods: Suitable for spraying (electrostatic, Airmix, Airless) or brush application. Ensure adequate ventilation and use appropriate spray equipment for the chosen method.
Compatibility: Bonds well to properly prepared steel, galvanized steel, and aluminum. Not recommended for direct application on plastic or flexible materials without specialized primers.
Care and Maintenance: Once fully cured, the surface is durable and resistant to washing with standard automotive cleaners. Avoid abrasive cleaning methods that could damage the semi-gloss finish. Regularly inspect for any damage and touch up as needed to maintain protective integrity.