Ft Paints 2K PU265 HS Chassis Paint - Green - 2750ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Ft Paints 2K PU265 HS Chassis Paint is designed for professionals and serious DIYers seeking robust protection for truck and commercial vehicle chassis. Its key benefit is a durable, high-build coating with active corrosion resistance, offering a professional semi-gloss finish. A potential caveat is the need for specific application methods and curing times common with two-component coatings.
All features
| Colour | Green |
|---|---|
| Model Part Number | 2K PU265 HS |
| Brand | FT Paints |
| Container Volume | 2750 |
Extended Product Information
FAQs
What is the shelf life of the mixed paint?
Once mixed with the hardener, the pot life is limited, typically a few hours. Refer to the product data sheet for the exact pot life at your working temperature. Only mix what you can use within this timeframe.
Can this paint be applied by brush?
Yes, this paint can be applied by brush, although spray application is generally recommended for a more uniform and professional finish on chassis.
What is the coverage rate of the 2.75L kit?
Coverage varies depending on the film thickness applied. A typical coverage rate for high-build coatings like this is around 8-10 square meters per litre at the recommended dry film thickness. Consult the product's technical data sheet for precise figures.
How long should I wait between coats?
Recoatability depends on the temperature and humidity. Generally, it can be recoated within a few hours (touch dry) up to 24 hours. Beyond 24 hours, a light sanding may be required for optimal adhesion. Always check the manufacturer's technical data sheet.
Is this paint suitable for a car chassis?
While designed for heavy-duty commercial vehicles, it can be used on car chassis if the required surface preparation and application conditions are met. However, its heavy-duty nature and finish may differ from standard automotive paints.
What safety precautions should I take when using this product?
Always use in a well-ventilated area. Wear appropriate personal protective equipment (PPE), including a respirator, gloves, and eye protection. Refer to the Safety Data Sheet (SDS) for full details.
Can I paint over existing paint?
It is recommended to apply to bare, prepared metal. If painting over existing paint, ensure it is sound, clean, degreased, and lightly abraded. Compatibility should be tested if unsure.
Troubleshooting
Paint is too thick to apply
Ensure correct mixing ratios are used. Add the recommended amount of thinner for the application method if necessary, following manufacturer guidelines.
Poor adhesion to the surface
Verify that the surface was properly prepared, cleaned, and degreased before application. Ensure there was no rust or contamination present and that the paint was applied within its recoat window.
Uneven finish or 'orange peel' effect
Adjust spray gun settings (pressure, fan width, trigger control) or application speed. Ensure the paint viscosity is correct for the chosen application method.
Bubbles or pinholes in the coating
Check for surface contamination or moisture. Ensure adequate ventilation during application and curing. Avoid applying too thickly in one coat.
Coating remains soft or tacky after several days
Verify that the hardener was mixed correctly and that the ambient temperature and humidity are within the recommended application range. Insufficient curing can occur in cold or damp conditions.
Pros and Cons
Pros
- Provides excellent long-term protection against corrosion and weathering.
- Achieves a professional, smooth semi-gloss finish.
- High adhesion to common automotive metal substrates.
- Resistant to heat and common solvents found in workshop environments.
- Available in multiple kit sizes and colours for different project needs.
Cons
- Requires proper mixing of paint, hardener, and thinner (kit bundle recommended).
- Full cure takes 7-8 days, requiring patience before heavy use.
- Application may require specific equipment and ventilation due to its 2K nature.
- Not suitable for direct application on rust without proper surface preparation.
- Colour matching across different batches may require careful attention.
Setup, Compatibility & Care
Setup: This product is a two-component (2K) system. The kit bundle includes the paint, hardener, and thinner in pre-measured ratios. Ensure accurate mixing according to the manufacturer's instructions, typically a specific volume ratio of paint:hardener:thinner. Mix thoroughly until a homogeneous consistency is achieved.
Compatibility: The paint is designed for direct application onto prepared surfaces of steel, galvanised steel, and aluminium. Ensure surfaces are clean, dry, and free from grease, oil, and rust. It is not recommended for use over old, poorly adhering paintwork.
Application Methods: Suitable for electrostatic, Airmix, Airless spray guns, and brush application. Choose the method appropriate for your equipment and desired finish. For spray applications, ensure appropriate thinning for viscosity.
Curing: The coating is dust-dry in 15-30 minutes under standard conditions (e.g., 20°C). However, it requires 7-8 days for a full cure, after which it reaches maximum hardness and resistance. Avoid exposing the coated surface to heavy use or harsh chemicals before full cure.
Care: Clean tools and equipment immediately after use with a suitable solvent thinner. For the coated chassis, periodic washing with mild detergents and water is recommended. Avoid abrasive cleaners or high-pressure washing directly on the coated surface, especially before full cure.