Ft Paints Chassis Paint - Satin Gloss Finish - 2.75 L Kit - Light Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Ft Paints RT 2K PU265 HS Chassis Topcoat is designed for professionals and serious DIYers seeking heavy-duty protection for truck and commercial vehicle chassis. Its key benefit is providing a durable, high-build finish with superior corrosion and weather resistance, ensuring longevity in demanding environments. A potential caveat is the need for proper ventilation and application equipment due to its professional formulation. This kit offers a semi-gloss finish and includes paint, hardener, and thinner for a complete solution.
All features
| Colour | Grey |
|---|---|
| Model Part Number | FT-PU265-P1.90L-H0.48L-T0.37L-SG-SS |
| Brand | FT Paints |
| Container Volume | 2750 |
Extended Product Information
FAQs
What is the mix ratio for the 2.75L kit?
The kit contains 1.90L of paint, 0.48L of hardener, and 0.37L of thinner. Always refer to the product's Technical Data Sheet (TDS) for precise mixing ratios and application instructions.
How long does it take to cure fully?
The coating achieves dust-dry in 15-30 minutes but requires 7-8 days for a full cure under standard conditions (e.g., 20°C and 50% relative humidity).
Can this be applied over existing paint?
Yes, if the existing coating is sound, clean, and properly prepared (e.g., lightly abraded). Ensure compatibility with the existing paint system; a test patch is recommended.
What is the recommended application method?
This product is versatile and can be applied using electrostatic, Airmix, Airless spray, or brush methods. Spray application is generally recommended for achieving the best finish on chassis.
What is the temperature range for application?
The product can withstand short-term exposure up to 180°C after curing. For application, it's best to work within moderate temperatures (typically 10°C to 30°C) and avoid high humidity.
How should I clean my equipment after use?
Clean spray guns, brushes, and other tools immediately after use with the recommended thinner specified in the product's technical documentation.
Does this product require a primer?
While the coating has strong adhesion properties, using a compatible primer is recommended for optimal corrosion protection and adhesion, especially on bare steel or galvanised surfaces.
Troubleshooting
Uneven finish or "orange peel" effect
Adjust spray gun settings (pressure, fan width), reduce spray-to-object distance, or adjust thinner amount if viscosity is too high or low.
Coating not drying or curing properly
Ensure correct mixing ratio of paint and hardener, check ambient temperature and humidity (avoid applying in extreme conditions), and verify product expiry dates.
Poor adhesion to the surface
Thoroughly clean and prepare the substrate. Ensure all grease, oil, and rust are removed. Use an appropriate primer if required for the substrate type.
Visible brush marks
Use a high-quality brush suitable for solvent-based paints and apply with light, even strokes. Thinning the product appropriately may also help.
Pros and Cons
Pros
- Provides exceptional durability and protection for heavy-duty applications.
- Offers strong resistance to corrosion, weather, UV, and solvents.
- Achieves a professional semi-gloss finish with good coverage.
- Suitable for use on various metal substrates.
- Fast drying time improves application efficiency.
- Heat resistant for demanding environments.
Cons
- Requires proper ventilation and personal protective equipment due to its professional formulation.
- Application may require specialized equipment for optimal results (e.g., spray guns).
- Full cure time of 7-8 days means the surface is not ready for immediate heavy use.
- Kit size may not be suitable for very large projects without purchasing additional units.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) system, meaning the paint must be mixed with the provided hardener and potentially thinned to the correct viscosity before application. Always follow the specific mixing ratios and induction times as recommended by FT Paints for optimal performance. Ensure the application area is well-ventilated and free from dust.
Compatibility: The RT 2K PU265 HS Chassis Topcoat is designed to adhere well to properly prepared steel, galvanised steel, and aluminium surfaces. It is recommended to use a suitable primer for optimal adhesion and corrosion protection, especially on bare metal.
Care: Clean application tools immediately after use with the recommended thinner. For the coated surface, avoid abrasive cleaners or solvents. Regular washing with mild soap and water is sufficient to maintain the finish. Protect from physical damage where possible. In case of minor scratches after full cure, touch-up may be possible following specific procedures for 2K coatings.