FabioT. FT Paints 2K PU265 HS Chassis Paint - 2750ml - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for owners and maintainers of trucks and commercial vehicles seeking durable, professional chassis protection. The key benefit is the high-build polyurethane acrylic formula providing robust corrosion and weather resistance with a semi-gloss finish. A caveat is that it is a two-component system requiring precise mixing and a suitable application environment. Key features include its high-build nature, zinc phosphate reinforcement for rust prevention, excellent resistance to UV and solvents, strong adhesion to various metals, and heat resistance.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 2K PU265 HS |
| Brand | FabioT. |
| Container Volume | 2750ml |
Extended Product Information
FAQs
What is the mixing ratio for the 2.75L kit?
The 2.75L kit typically contains 1.90L of paint, 0.48L of hardener, and 0.37L of thinner. Always refer to the product's specific technical data sheet for the exact mixing ratios.
How long does it take for the paint to fully cure?
Under standard conditions, the paint achieves dust-dry in 15-30 minutes. However, a full cure, meaning the paint has reached its maximum hardness and chemical resistance, takes approximately 7-8 days.
Can this paint be used on painted surfaces?
Yes, it can be applied over existing, well-adhered paint finishes after proper surface preparation, which typically includes scuff sanding and cleaning. For best results, a compatible primer is recommended.
What is the best way to clean application tools?
Tools should be cleaned immediately after use with a suitable solvent, such as a lacquer thinner or cellulose thinner, as recommended by the manufacturer.
Is this paint suitable for exterior non-chassis metal parts?
While primarily designed for chassis, its protective properties and resistance to weather and UV make it suitable for other exterior metal components on vehicles that require heavy-duty protection.
What is the shelf life of the mixed paint?
The pot life of the mixed paint is limited. Once the hardener is added, it typically needs to be used within a few hours (e.g., 2-4 hours), depending on the ambient temperature. Refer to the technical data sheet for specific pot life information.
Does this product have a primer included?
No, the product is a topcoat. A separate, compatible primer is recommended for optimal adhesion and corrosion protection on bare metal surfaces.
Troubleshooting
Paint not drying or curing properly
Ensure the correct mixing ratio of paint, hardener, and thinner was used. Verify application temperature is within the recommended range. Check for adequate ventilation.
Poor adhesion to the surface
The surface may not have been adequately prepared. Ensure it was clean, dry, and free of contaminants. Consider applying an appropriate primer if not already done.
Uneven finish or "orange peel" effect
Adjust spray gun settings (pressure, fluid tip, fan pattern) or application technique. Ensure proper thinning and mixing. The ambient temperature might be too high or low.
Runs or sags in the paint film
Applied too much paint in one coat, or the paint was thinned too much. Reduce the amount of paint applied per coat and allow adequate flash-off time between coats.
Pros and Cons
Pros
- Provides robust, long-lasting protection for vehicle chassis.
- Excellent resistance to corrosion, UV, and chemicals.
- Achieves a professional semi-gloss finish.
- Suitable for a variety of metal substrates.
- Fast drying time enhances application efficiency.
Cons
- Requires careful mixing of two components (paint, hardener, thinner).
- Needs appropriate safety equipment and ventilation for application.
- Full cure takes 7-8 days, requiring patience before heavy use.
- May require specialized application equipment for best results.
Setup, Compatibility & Care
Setup: This is a two-component (2K) system. The kit includes paint, hardener, and thinner. It is crucial to mix these components in the correct ratios as specified by the manufacturer before application. Ensure the surface to be painted is clean, dry, and free from rust, grease, and old paint if not properly adhered. A primer designed for metal surfaces is recommended for optimal adhesion and corrosion protection.
Compatibility: The paint is designed to adhere strongly to steel, galvanized steel, and aluminum surfaces. It is compatible with standard automotive paint application equipment, including electrostatic, Airmix, Airless spray guns, and can also be applied by brush.
Care: After application and full cure, the chassis paint is highly durable. Cleaning can be done with water and mild detergents. Avoid abrasive cleaners or solvents that could damage the finish. For minor scratches or chips, touch-up application may be possible following the same preparation and mixing guidelines.