Ft Paints Chassis Paint - 1.10 L Kit - Anthracite Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for vehicle maintenance professionals and enthusiasts seeking durable, high-performance protection for truck and commercial vehicle chassis. The Ft Paints RT 2K PU265 HS Chassis Topcoat delivers exceptional durability and corrosion resistance with a professional semi-gloss finish. A key consideration is the requirement for proper mixing ratios and application conditions, as it is a 2K (two-component) system.
All features
| Colour | Grey |
|---|---|
| Model Part Number | FT-PU265-P0.76L-H0.19L-T0.15L-SG-SS |
| Brand | FT Paints |
| Container Volume | 1100 |
Extended Product Information
FAQs
What is the shelf life of the mixed product?
The pot life of the mixed 2K product is limited. Refer to the product's technical data sheet for the specific pot life, as it varies based on temperature and mixture ratios.
Can this be applied with a brush?
Yes, the Ft Paints RT 2K PU265 HS Chassis Topcoat is suitable for brush application, although spray methods typically yield a smoother, more uniform finish.
What preparation is needed for steel surfaces?
Steel surfaces should be clean, dry, and free from rust, scale, grease, and oil. Abrasive blasting to SA 2.5 is recommended, followed by degreasing. A suitable primer may also be necessary for optimal adhesion and corrosion protection.
How long should I wait before recoating?
Recoat times depend on temperature and humidity. Check the product's technical data sheet for specific recoat windows. Generally, it should be recoatable within a certain period before a full cure develops.
What is the mixing ratio for the 1.10L kit?
The 1.10L kit typically consists of 0.76L paint, 0.19L hardener, and 0.15L thinner. Always confirm the exact ratio on the product label or technical data sheet.
What is the maximum temperature it can withstand?
The coating can withstand short-term exposure to temperatures up to 180°C.
Is this product suitable for marine applications?
While it offers excellent weather and corrosion resistance, it is specifically formulated for vehicle chassis. For marine applications, a coating specifically designed for that environment would be recommended.
Troubleshooting
Paint not drying/curing properly
Verify that the correct hardener was used and mixed in the precise ratio. Ensure application temperature and humidity are within the manufacturer's recommended range. Insufficient mixing or incorrect component ratios are common causes.
Poor adhesion to substrate
The surface may not have been adequately prepared. Ensure it was clean, dry, and free of contaminants. Check if a suitable primer was used if required for the substrate material.
Uneven finish or surface defects
This can be caused by improper application technique, incorrect viscosity (too thick or too thin), or inadequate spray equipment setup. Ensure spray gun is set correctly and maintain consistent application distance and speed.
Orange peel effect
Adjust spray gun settings (e.g., fluid pressure, fan pattern) or reducer amount. Ensure correct spray distance and speed. The material may be too thick or applied at too low a temperature.
Pros and Cons
Pros
- Offers excellent long-term protection against corrosion and environmental factors.
- Provides a professional, aesthetically pleasing semi-gloss finish.
- Suitable for a wide range of application methods.
- Withstands high temperatures, ideal for engine bay or exhaust proximity.
- Fast drying time improves workflow efficiency.
Cons
- Requires precise mixing of two components (paint, hardener) and thinner.
- Application may require specialized equipment for best results (e.g., spray gun).
- Full cure takes 7-8 days, necessitating careful handling during this period.
- Potential for solvent fumes requires adequate ventilation during application.
Setup, Compatibility & Care
Setup:
This is a 2K (two-component) product. Before application, the paint, hardener, and thinner must be mixed in the correct proportions as specified by the manufacturer. Typically, this involves combining 0.76L of paint with 0.19L of hardener and 0.15L of thinner for the 1.10L kit. Stir thoroughly until a homogenous mixture is achieved. Allow for a brief induction period if recommended by the manufacturer.
Compatibility:
This coating adheres well to properly prepared surfaces including bare steel, galvanized steel, and aluminum. Ensure surfaces are clean, dry, and free from contaminants such as grease, oil, or old paint. It is designed as a topcoat and may require a suitable primer for optimal performance on certain substrates.
Care:
To maintain the finish, clean the chassis regularly with mild detergents and water. Avoid abrasive cleaners or tools that could scratch the semi-gloss surface. Ensure any cleaning agents used are compatible with polyurethane coatings. Regular inspection for any chips or damage is recommended to address potential corrosion points early.