Ft Paints Chassis Paint Kit - 20000ml - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for automotive professionals and serious DIYers looking to protect truck and commercial vehicle chassis. The key benefit is durable, high-build protection with excellent corrosion and weather resistance. A caveat is the need for proper ventilation and personal protective equipment during application. This 20.0L kit includes paint, hardener, and thinner for a semi-gloss finish, offering robust defence against harsh environments and up to 180°C heat.
All features
| Colour | Grey |
|---|---|
| Model Part Number | FT-PU265-P13.8L-H3.4L-T2.8L-SG-SS |
| Brand | FT Paints |
| Container Volume | 20000ml |
Extended Product Information
FAQs
What is the mixing ratio for this 2K paint?
The exact mixing ratio of paint, hardener, and thinner is crucial and can be found on the product's Technical Data Sheet (TDS). Always consult the TDS before mixing.
What kind of surface preparation is needed?
Surfaces must be clean, dry, and free from grease, oil, and contaminants. A suitable primer is recommended for steel, galvanized steel, and aluminium for optimal performance.
How long does it take to fully cure?
The paint achieves full cure in approximately 7-8 days under standard conditions. It is dust-dry within 15-30 minutes.
Can this paint be used on surfaces other than chassis?
While formulated for chassis, its properties might suit other heavy-duty metal applications requiring corrosion and weather resistance. Always test on a small, inconspicuous area first.
What safety precautions should I take when using this product?
Ensure good ventilation, wear appropriate personal protective equipment including a respirator, gloves, and eye protection. Consult the Safety Data Sheet (SDS) for detailed safety information.
What is the shelf life of the mixed product?
The pot life of the mixed product is limited and varies depending on temperature. Refer to the TDS for specific pot life information after mixing components.
Can I apply this paint in cold weather?
Application temperature significantly affects drying and curing. It's best to apply within the temperature range specified in the product's TDS. Cold temperatures will slow down the curing process considerably.
Troubleshooting
Paint not drying or curing properly
Ensure correct mixing ratios of paint, hardener, and thinner. Verify ambient temperature and humidity are within the recommended application range. Check if the hardener is expired or has been contaminated.
Poor adhesion to the surface
The surface may not have been adequately prepared. Re-clean the surface, removing all contaminants, and ensure a suitable primer was used if required for the substrate.
Uneven or rough finish
Adjust spray gun settings (pressure, fan pattern, tip size) or application technique. Ensure the paint is adequately thinned for the application method. Check for blockages in spray equipment.
Runs or sags in the coating
Apply thinner coats rather than one heavy coat. Reduce fluid delivery or increase spraying speed. Ensure proper viscosity for the application method.
Pros and Cons
Pros
- Exceptional durability for heavy-duty chassis protection.
- Superior resistance to corrosion, weathering, and solvents.
- Provides a professional, aesthetically pleasing semi-gloss finish.
- Good adhesion to various metal surfaces.
- Suitable for high-temperature environments.
Cons
- Requires careful mixing of paint, hardener, and thinner.
- Application necessitates proper ventilation and safety equipment.
- Full cure time of 7-8 days may require planning.
- Not suitable for all substrates without appropriate priming.
Setup, Compatibility & Care
Setup:
This is a 2K (two-component) system that requires mixing the paint, hardener, and thinner in the correct proportions before application. Always refer to the product's Technical Data Sheet (TDS) for precise mixing ratios. Ensure the surfaces to be coated are clean, dry, and free from grease, oil, and contaminants. A suitable primer should be used on bare steel, galvanized steel, or aluminium for optimal adhesion and protection.
Compatibility:
This product is designed for use on steel, galvanized steel, and aluminium. It is compatible with various application methods, including electrostatic spray, Airmix, Airless, and brush application. Ensure all associated products (primers, thinners) are compatible with this polyurethane acrylic system.
Care:
To maintain the protective finish, regularly clean the chassis with mild detergents and water. Avoid abrasive cleaners or high-pressure washing directly at seams or coated edges. Inspect the coating periodically for any signs of damage and perform touch-ups as needed using the same product and recommended procedures.