Ft Paints Chassis Paint - 5500ml - Yellow
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and enthusiasts seeking a durable, high-performance coating for truck and commercial vehicle chassis. The Ft Paints RT 2K PU265 HS Chassis Topcoat in Yellow offers robust, long-lasting protection with excellent corrosion and weather resistance, ensuring a professional semi-gloss finish. A key caveat is the need for proper ventilation and protective equipment due to its industrial formulation. This 5.50L kit includes paint, hardener, and thinner, providing a comprehensive solution for demanding applications.
All features
| Colour | Yellow |
|---|---|
| Model Part Number | FT-PU265-P3.81L-H0.95L-T0.74L-S-SS |
| Brand | FT Paints |
| Container Volume | 5500ml |
Extended Product Information
FAQs
What is the shelf life of the RT 2K PU265 HS Chassis Topcoat?
The shelf life typically depends on storage conditions and whether the containers are sealed. Refer to the product's technical data sheet or packaging for specific expiry dates and storage recommendations.
Can this paint be used on existing painted surfaces?
Yes, but only if the existing paint is in good condition, sound, and compatible. The surface must be thoroughly cleaned, degreased, and lightly abraded to ensure proper adhesion. Always test on a small, inconspicuous area first.
How long should I wait between coats?
The recoat interval depends on temperature and humidity. Generally, there is a minimum recoat time and a maximum recoat time. Consult the product's technical data sheet for precise recoat intervals.
What safety precautions are necessary when using this product?
Always use in a well-ventilated area. Wear appropriate personal protective equipment (PPE), including solvent-resistant gloves, safety goggles or a face shield, and a respirator suitable for organic vapors and particulates. Refer to the Safety Data Sheet (SDS) for detailed safety information.
What is the mixing ratio for the 5.50L kit?
The mixing ratio (paint:hardener:thinner) must be strictly followed as per the technical data sheet. For the 5.50L kit, this typically involves specific volumes for each component to achieve the correct formulation.
Is this product suitable for interior chassis components?
While designed for heavy-duty exterior chassis, its protective properties make it suitable for interior components that require robust protection against corrosion and wear. Ensure compatibility with the specific interior environment.
How do I achieve the best semi-gloss finish?
Achieve the best finish by using the correct application method (spraying is often preferred for uniformity), ensuring proper thinning for the right viscosity, and maintaining consistent application speed and distance. Avoid applying in adverse weather conditions.
Troubleshooting
Poor adhesion to the surface
Ensure the surface was properly cleaned, degreased, and abraded before application. Verify that the correct primer was used or that the metal substrate was adequately prepared.
Uneven or "orange peel" finish
Adjust spray gun settings (pressure, fan pattern, fluid delivery) or application technique. Ensure proper mixing of components and use of the correct thinner for viscosity adjustment.
Coating remains tacky or does not cure
Verify correct mixing ratios of paint and hardener. Check application temperature and humidity; avoid application below the recommended minimums. Ensure adequate ventilation for solvent evaporation.
Bubbles or pinholes in the finish
Ensure the surface is completely dry and free from contaminants. Avoid applying too thickly. Check for proper ventilation and adequate thinning if the product is too viscous for the application method.
Runs or sags in the paint film
Apply thinner coats rather than one heavy coat. Reduce the amount of paint being applied by adjusting the spray gun or technique. Ensure the product is not over-thinned.
Pros and Cons
Pros
- Provides excellent corrosion protection with zinc phosphate.
- Offers superior resistance to UV, weather, and solvents for extended durability.
- High-build formula ensures a thick, protective layer.
- Achieves a professional semi-gloss finish.
- Good adhesion to common chassis materials.
Cons
- Requires proper ventilation and personal protective equipment.
- Two-component system (paint + hardener) requires accurate mixing.
- Long full cure time of 7-8 days means reduced use of the treated chassis immediately after application.
- Specific thinners are required, adding to material needs.
- Best applied by experienced users or professionals for optimal results.
Setup, Compatibility & Care Instructions
Setup:
This product is a two-component system requiring mixing of the paint, hardener, and thinner in specific ratios (refer to the product's technical data sheet for exact proportions). Ensure a clean, well-ventilated workspace, free from dust and contaminants. Proper application equipment, such as spray guns (electrostatic, Airmix, Airless) or brushes, should be prepared and clean.
Compatibility:
- Surfaces: Bonds well to properly prepared steel, galvanized steel, and aluminum.
- Primers: Designed to be applied over suitable primers or directly to correctly prepared metal surfaces. Compatibility with existing coatings should be tested.
- Thinner: Use only the recommended thinner specified by FT Paints for this product to ensure optimal performance and drying characteristics.
Care:
- Application Surface: Ensure the surface to be coated is clean, dry, and free from grease, oil, rust, and old paint flakes. Mechanical cleaning or abrasion is often recommended before application.
- Mixing: Accurately measure and mix the paint, hardener, and thinner according to the manufacturer's instructions. Allow for the recommended induction time if specified.
- Application Conditions: Apply within the recommended temperature and humidity range to ensure proper drying and film formation. Avoid application in direct sunlight or extreme temperatures.
- Cleaning Equipment: Clean all application tools immediately after use with the recommended thinner to prevent the coating from curing in the equipment.