Ft Paints Chassis Paint - 5500ml - Red
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Ft Paints RT 2K PU265 HS Chassis Topcoat in Red is designed for professionals and serious DIYers seeking robust protection for truck and commercial vehicle chassis. Its key benefit is superior durability and corrosion resistance, ensuring longevity in harsh conditions. A potential caveat is the need for proper ventilation and protective gear due to its 2K formulation. This high-build polyurethane acrylic coating provides a semi-gloss finish with excellent adhesion and resistance to weather, UV, and solvents. The 5.50L kit includes paint, hardener, and thinner for a complete application.
All features
| Colour | Red |
|---|---|
| Model Part Number | FT-PU265-P3.81L-H0.95L-T0.74L-SG-SS |
| Brand | FT Paints |
| Container Volume | 5500ml |
Extended Product Information
FAQs
What is the mixing ratio for the paint and hardener?
The exact mixing ratio for the RT 2K PU265 HS Chassis Topcoat is provided in the product's technical data sheet. It is crucial to follow these instructions precisely for optimal performance and curing.
How long does it take for the paint to fully cure?
Under standard conditions (e.g., 20°C and 50% relative humidity), the paint will be dust-dry in 15-30 minutes. However, a full cure, meaning the coating has reached its maximum hardness and resistance properties, typically takes 7-8 days.
Can this paint be applied in cold weather?
Application in cold temperatures can significantly slow down the drying and curing process. It is recommended to apply this product within a specific temperature range, as indicated in the technical data sheet, for best results.
What surfaces can this chassis topcoat be applied to?
The coating bonds well to prepared steel, galvanized steel, and aluminium surfaces. A compatible primer is often recommended for optimal adhesion and corrosion resistance.
What safety precautions should I take when using this product?
As a 2K polyurethane coating, it requires good ventilation. Wear appropriate personal protective equipment, including a respirator with organic vapor cartridges, chemical-resistant gloves, and eye protection, to avoid inhalation and skin contact.
How should I clean my application equipment after use?
Clean all equipment immediately after use with a suitable solvent or thinner recommended by FT Paints for polyurethane coatings to prevent the product from hardening in the equipment.
What is the shelf life of the product?
Refer to the product packaging or the manufacturer's technical data sheet for the specific shelf life. Storing in a cool, dry place away from direct sunlight will help maintain product integrity.
Troubleshooting
Coating not drying properly
Ensure the correct hardener ratio was used and thoroughly mixed. Check ambient temperature and humidity; application in cold or very humid conditions can slow drying. Verify the correct thinner was used and in the appropriate amount.
Poor adhesion or peeling
The surface may not have been adequately prepared. Ensure the substrate was clean, dry, and free from grease, oil, or rust. A compatible primer may be necessary for optimal adhesion. Check that the paint was applied within its recoat window.
Uneven finish or runs
Adjust spray gun settings (pressure, fan width, fluid tip) or application technique. For brush application, use appropriate brushes and avoid overworking the paint. Ensure the viscosity is correctly adjusted with thinner for the chosen application method.
Bubbling or blistering
This can occur if moisture is trapped beneath the coating or if the paint was applied too thickly. Ensure the surface is completely dry before application. Apply in thinner, even coats rather than one heavy coat. Ensure adequate ventilation.
Pros and Cons
Pros
- Provides excellent, long-lasting protection against corrosion and environmental damage.
- Durable semi-gloss finish that enhances vehicle appearance.
- Strong adhesion to various metal surfaces.
- Resistant to heat, UV, and solvents.
- Fast drying times improve application efficiency.
Cons
- Requires careful handling due to its 2K formulation (involving a hardener).
- Proper ventilation and personal protective equipment are essential during application.
- Full cure takes several days, during which the coating is vulnerable.
- May require specific thinner ratios for optimal application, depending on method.
Setup, Compatibility & Care
Setup: This product is a 2K (two-component) system. Before application, the paint and hardener must be mixed in the correct ratio specified by FT Paints. Use the included thinner to adjust viscosity based on the application method (electrostatic, Airmix, Airless, brush) and ambient conditions. Ensure all application equipment is clean and suitable for use with polyurethane coatings.
Compatibility: The RT 2K PU265 HS Chassis Topcoat is designed to adhere strongly to prepared surfaces of steel, galvanized steel, and aluminium. It is recommended to use a compatible primer for optimal adhesion and corrosion protection, especially on bare metal.
Care: After application and full cure, the coated surface is durable and requires minimal specific care beyond regular vehicle cleaning. Avoid harsh chemical cleaners that could potentially damage the coating. For maintenance, inspect the chassis periodically for any signs of damage and touch up as needed with a compatible system.