Ft Paints Chassis Paint - 5.50 L - Blue - Semi Gloss
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and DIY enthusiasts working on heavy-duty trucks and commercial vehicles. The FT Paints 2K PU265 HS Chassis Topcoat in Blue (5.50L Kit) offers superior, long-lasting protection against corrosion and the elements with a durable semi-gloss finish. A key consideration is the need for proper ventilation and personal protective equipment due to its professional-grade formulation.
All features
| Colour | Blue |
|---|---|
| Model Part Number | 2K PU265 |
| Brand | FT Paints |
| Container Volume | 5500 |
Extended Product Information
FAQs
What is the mixing ratio for the 5.50L kit?
The 5.50L kit typically includes 3.81L of paint, 0.95L of hardener, and 0.74L of thinner. Always refer to the product's technical data sheet for the exact mixing ratios, as variations may occur.
What is the pot life after mixing?
The pot life (working time) for 2K coatings is typically limited, often ranging from 1 to 4 hours after mixing the paint and hardener, depending on temperature. Consult the product's technical data sheet for precise information.
Can this paint be applied with a roller?
While primarily designed for spray application (electrostatic, Airmix, Airless), it may be possible to apply with a suitable high-density roller for touch-ups, though a smooth, uniform finish might be more challenging to achieve compared to spraying.
How long does it take for the chassis to fully cure?
Under standard conditions (e.g., 20°C), the paint is typically dust-dry in 15-30 minutes and achieves a full cure in 7-8 days. Cooler temperatures will extend drying and curing times.
What safety precautions should I take when using this product?
Always use in a well-ventilated area. Wear appropriate personal protective equipment (PPE), including a respirator with organic vapor cartridges, chemical-resistant gloves, and eye protection. Refer to the Safety Data Sheet (SDS) for full details.
Can I apply this over existing paint?
Yes, provided the existing coating is sound, well-adhered, and properly cleaned and prepared. Light abrasion may be necessary for optimal adhesion. Always test on a small area first if unsure.
What colors are available?
This specific product is available in Blue. FT Paints offers the 2K PU265 HS Chassis Topcoat in other colors such as Green, Grey, and Black, often with different kit sizes.
Troubleshooting
Paint not drying properly
Ensure correct hardener and thinner ratios were used. Check ambient temperature and humidity; avoid application in cold, damp conditions. Ensure adequate ventilation for solvent evaporation.
Poor adhesion or peeling
Surface preparation was likely insufficient. Ensure the substrate was clean, dry, and properly abraded if necessary. Remove all contaminants like oil, grease, or rust before application.
Uneven finish or runs
Adjust spray gun pressure, nozzle size, and spray pattern. Apply in thin, even coats rather than one thick coat. Ensure consistent distance from the surface during application.
Surface appears dull or lacks gloss
Verify that the correct hardener was used and fully mixed. Ensure the paint was applied within its recommended pot life after mixing. Environmental factors like high humidity during drying can sometimes affect gloss.
Pros and Cons
Pros
- Offers robust, heavy-duty protection for vehicle chassis.
- Excellent resistance to corrosion, UV, and weathering.
- Provides a professional-looking semi-gloss finish.
- Good adhesion to various metal surfaces.
- Fast drying time improves workflow efficiency.
Cons
- Requires proper ventilation and PPE due to its formulation.
- Professional application knowledge may be beneficial.
- Not suitable for direct food contact or certain sensitive materials.
- Hardener and thinner are specific to the 2K system and must be used correctly.
Setup, Compatibility & Care
Setup: This product is a kit containing paint, hardener, and thinner. Ensure you use the correct components and ratios as specified by FT Paints for optimal performance. Mix thoroughly before application. For best results, apply in a well-ventilated area away from dust and contaminants.
Compatibility: The 2K PU265 HS Chassis Topcoat adheres well to properly prepared steel, galvanized steel, and aluminum. Ensure surfaces are clean, dry, and free from grease, oil, and previous coatings unless they are compatible and well-adhered. It is recommended to use FT Paints thinners for best results.
Care: Clean application tools immediately after use with appropriate thinners. For the painted surface, regular cleaning with mild detergents and water will maintain the finish. Avoid abrasive cleaners or solvents that could damage the coating. The coating is heat resistant up to 180°C for short periods.