Ft Paints Chassis Paint - 5.50 L - Green - Semi Gloss
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and DIY enthusiasts looking to protect and enhance the chassis of trucks and commercial vehicles. The Ft Paints 2K PU265 HS Chassis Topcoat offers heavy-duty, durable, and weatherproof protection with active corrosion resistance. A key consideration is that this is a two-component system requiring precise mixing of paint, hardener, and thinner.
All features
| Colour | Green |
|---|---|
| Model Part Number | 2K PU265 |
| Brand | FT Paints |
| Container Volume | 5500 |
Extended Product Information
FAQs
What is the coverage rate for this paint?
Coverage rates vary based on application method and surface profile. Consult the product's technical data sheet for specific coverage information.
How long is the pot life after mixing?
The pot life (or working time) depends on temperature. Refer to the technical data sheet for the recommended pot life for the mixed product.
Can this paint be applied in cold weather?
Application temperature limits apply. Generally, avoid applying in temperatures below 10°C (50°F) or if the surface temperature is close to the dew point. Always check the product's technical data sheet.
What is the recommended film thickness?
The recommended dry film thickness (DFT) will be specified in the technical data sheet. This ensures optimal performance and durability.
How should I store unused mixed product?
Mixed product has a limited pot life and cannot typically be stored. Unmixed components should be stored in their original, tightly sealed containers in a cool, dry place away from direct sunlight.
Is this paint suitable for automotive body panels, or just chassis?
This product is specifically formulated as a high-build chassis topcoat for heavy-duty protection. For automotive body panels, a different type of paint designed for that purpose would typically be recommended.
What safety precautions are needed during application?
Use in a well-ventilated area. Wear appropriate personal protective equipment (PPE), including solvent-resistant gloves, eye protection, and a respirator suitable for organic vapors. Refer to the Safety Data Sheet (SDS) for comprehensive safety information.
Troubleshooting
Paint not drying or curing properly
Ensure the correct ratio of paint to hardener was used. Verify that the ambient temperature and humidity are within the recommended application range. Insufficient mixing can also be a cause.
Poor adhesion to the surface
Check that the surface was adequately prepared (cleaned, degreased, and abraded). Ensure no contaminants were present during application. A compatible primer may be required.
Uneven or rough finish
Adjust spray technique for an even pattern and flow. Ensure the paint viscosity is correct by adding the appropriate amount of thinner. Check for blockages in spray equipment.
Runs or sags in the coating
Apply in thinner coats. Reduce the amount of thinner if viscosity is too low. Avoid over-application in one pass.
Pros and Cons
Pros
- Provides excellent, long-lasting protection for heavy-duty vehicle chassis.
- Active corrosion inhibition due to zinc phosphate content.
- Resistant to UV, weather, and solvents, maintaining finish and integrity.
- Suitable for various application methods, offering flexibility.
- High-build formula ensures a durable, protective coating.
Cons
- Requires precise mixing of two components (paint and hardener) plus thinner.
- Potential for VOC emissions requires adequate ventilation and safety measures.
- Application may require specialized equipment depending on the chosen method.
Setup, Compatibility & Care
Setup:
- Surface Preparation: Ensure the surface is clean, dry, and free from grease, oil, and existing loose paint. Abrasive blasting or thorough sanding is recommended for optimal adhesion.
- Mixing: This is a two-component (2K) system. Carefully measure and mix the paint, hardener, and thinner in the specified ratios (refer to the product's technical data sheet for exact ratios). Mix thoroughly to ensure uniformity.
- Application: Apply using electrostatic, Airmix, Airless spray, or brush. Ensure consistent application for an even finish.
Compatibility:
This product is designed for metal chassis, particularly on trucks and commercial vehicles. It is compatible with most standard primers suitable for automotive and industrial applications. Always test on a small, inconspicuous area if unsure.
Care:
Clean the coated surface with mild detergents and water. Avoid using abrasive cleaners or solvents that could damage the finish. Regular cleaning will help maintain the protective properties and appearance of the coating.