Ft Paints Chassis Paint - 2750ml - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for fleet managers, mechanics, and vehicle restoration enthusiasts who need a durable, high-performance coating for commercial vehicle chassis. The key benefit is exceptional protection against corrosion and environmental damage with a professional semi-gloss finish. A potential caveat is the requirement for a separate hardener and thinner for application, which needs to be accounted for in purchasing and mixing.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 2K PU265 HS |
| Brand | FT Paints |
| Container Volume | 2750ml |
Extended Product Information
FAQs
What is the correct mixing ratio for the 2.75L kit?
The 2.75L kit contains 1.90L of paint, 0.48L of hardener, and 0.37L of thinner. The typical mixing ratio for this product is 4 parts paint to 1 part hardener to 0.5 parts thinner by volume. Always confirm with the specific product data sheet for the most accurate ratio.
How long does the paint take to fully cure?
The paint is dust-dry in 15-30 minutes. However, it requires 7-8 days under standard conditions (around 20°C) to achieve a full cure and reach its maximum hardness and durability.
Can this paint be used on other parts of a vehicle besides the chassis?
While formulated for heavy-duty chassis protection, its properties like corrosion and weather resistance may make it suitable for other exposed metal components. However, always test on an inconspicuous area first and ensure compatibility.
What is the shelf life of the mixed paint?
Once mixed with the hardener, the pot life (working time) is limited. Typically, it ranges from 2-4 hours depending on temperature. Unmixed components should be stored in cool, dry conditions according to manufacturer recommendations.
Is this paint suitable for use in extreme heat?
Yes, the coating is heat resistant and can withstand short-term exposure up to 180°C, making it suitable for demanding conditions often found on commercial vehicle chassis.
What type of surfaces does this paint adhere to?
It offers strong adhesion to properly prepared surfaces of steel, galvanised steel, and aluminium.
How should I clean the painted chassis?
Regular cleaning with mild detergents and water is recommended. Avoid using harsh abrasive cleaners or solvents that could potentially damage the semi-gloss finish.
Troubleshooting
Coating is too thick or uneven
Adjust thinner ratio as per manufacturer's instructions for the application method. Ensure proper mixing and application technique.
Poor adhesion to surface
Ensure the surface was properly prepared (clean, dry, free of contaminants) and abraded if necessary. Verify compatibility with the substrate.
Paint is not drying
Check ambient temperature and humidity; ideal application conditions are typically between 15-25°C. Ensure the correct hardener was used and mixed in the correct ratio. Insufficient drying can occur if applied too thickly.
Visible brush marks
Use a high-quality brush suitable for paints and apply with smooth, consistent strokes. Thinning the paint slightly might help. Consider spray application for a smoother finish.
Pros and Cons
Pros
- Offers robust, heavy-duty protection for commercial vehicle chassis.
- Excellent resistance to corrosion, weathering, UV, and solvents.
- Provides a professional semi-gloss finish with good coverage.
- Bonds securely to various metal substrates.
- Suitable for high-temperature environments.
Cons
- Requires a separate hardener and thinner for proper application.
- Full cure takes 7-8 days, requiring time before heavy use.
- Application methods may require specific equipment and expertise.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from grease, oil, and rust. Light abrasion or priming may be necessary depending on the substrate condition and type.
Mixing: This is a 2K (two-component) system. The paint requires mixing with a specific hardener and thinner. Refer to the product data sheet for precise mixing ratios (typically provided as a volume ratio, e.g., 4:1:0.5 for paint:hardener:thinner). Mix thoroughly until uniform.
Application Methods: Compatible with electrostatic, Airmix, Airless spray guns, and can also be applied by brush. Ensure appropriate equipment is used for the chosen method and desired finish. Recommended film thickness will vary by application method.
Compatibility: Adheres well to prepared steel, galvanised steel, and aluminium.
Care: Clean with mild detergents and water. Avoid abrasive cleaners or solvents that could damage the finish.