Ft Paints Chassis Paint - Yellow - 2750ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for owners and operators of commercial vehicles and trucks seeking durable, long-lasting protection for their chassis. The key benefit is robust, anti-corrosive coating that enhances vehicle longevity and appearance. A caveat to consider is the need for proper ventilation and protective gear during application due to its professional-grade formulation. This 2.75L kit of FT 2K PU265 HS Chassis Topcoat in Yellow provides a semi-gloss finish, offering high-build polyurethane acrylic protection fortified with zinc phosphate for active corrosion resistance, ensuring excellent durability against weather, UV, and solvents.
All features
| Colour | Yellow |
|---|---|
| Model Part Number | FT-PU265-P1.90L-H0.48L-T0.37L-S-SS |
| Brand | FT Paints |
| Container Volume | 2750ml |
Extended Product Information
FAQs
What is the mixing ratio for the 2.75L kit?
The 2.75L kit contains 1.90L paint, 0.48L hardener, and 0.37L thinner. The exact mixing ratio for paint to hardener is typically 4:1 or 5:1 by volume, with thinner added to adjust viscosity. Always refer to the specific product data sheet for precise ratios.
How long does it take to fully cure?
Under standard conditions, the paint will be dust-dry in 15-30 minutes, but it requires 7-8 days for a full cure. Avoid heavy use or exposure to harsh conditions during this period.
Can this paint be applied with a brush?
Yes, this coating is suitable for brush application, alongside electrostatic, Airmix, and Airless spray methods. Ensure even application when brushing to avoid visible brush marks.
What surfaces can this chassis paint be applied to?
It adheres strongly to properly prepared steel, galvanized steel, and aluminum surfaces.
How resistant is this paint to chemicals and solvents?
The FT 2K PU265 HS Chassis Topcoat offers outstanding resistance to solvents and various chemicals, making it ideal for heavy-duty applications.
What is the heat resistance of this product?
This coating can withstand short-term exposure to temperatures up to 180°C, providing protection in high-heat environments.
What is the shelf life of the mixed product?
The pot life (working time) of the mixed product is limited. Once mixed with the hardener, it must be used within a specific timeframe, typically 1-2 hours depending on temperature. Refer to the product datasheet for exact pot life.
Troubleshooting
Paint not drying or curing properly
Ensure correct hardener ratio is used and mixed thoroughly. Check ambient temperature and humidity; application below recommended temperatures or in very high humidity can affect curing. Ensure adequate ventilation for solvent evaporation.
Poor adhesion to surface
Surface may not have been adequately prepared or cleaned. Ensure the substrate is free of grease, oil, or rust and has been properly abraded before application.
Uneven finish or "orange peel" effect
Adjust spray gun settings (pressure, fan pattern, nozzle size) and application technique. Ensure correct viscosity by adding the appropriate amount of thinner. Maintain consistent gun speed and distance from the surface.
Sagging or runs in the paint film
Coats may be too thick, or the paint viscosity is too low. Apply thinner coats and allow sufficient flash-off time between coats. Reduce thinner addition if viscosity is too low.
Pros and Cons
Pros
- Offers excellent, durable protection for heavy-duty vehicle chassis.
- Active corrosion resistance due to zinc phosphate fortification.
- Withstands harsh environmental conditions including UV and solvents.
- Provides a professional, semi-gloss finish.
- Suitable for a wide range of application methods.
- Good heat resistance for demanding use cases.
Cons
- Requires proper ventilation and personal protective equipment (PPE) during application.
- Long full cure time of 7-8 days may impact vehicle return-to-service.
- Two-component system requires mixing of paint, hardener, and thinner, increasing complexity.
- Color matching may require careful attention if touching up existing paint.
- Not suitable for all substrate types without proper surface preparation.
Setup, Compatibility & Care
Setup & Application:
- Surface Preparation: Ensure the surface is clean, dry, and free from grease, oil, and contaminants. Abrade surfaces for optimal adhesion.
- Mixing: This is a 2.75L kit containing 1.90L of paint, 0.48L of hardener, and 0.37L of thinner. Mix the paint and hardener thoroughly according to the manufacturer's ratio (typically 4:1 or 5:1 by volume, consult product documentation for exact ratios). Add thinner as needed to achieve the desired viscosity for your chosen application method.
- Application: Apply using electrostatic, Airmix, Airless spray, or brush. Ensure even coats for best results. Work in a well-ventilated area.
Compatibility:
- Suitable for direct application onto properly prepared steel, galvanized steel, and aluminum.
- Can be used over compatible primers and existing paintwork (perform compatibility test).
Care:
- Clean tools immediately after use with an appropriate solvent.
- Avoid abrasive cleaning methods on the coated surface. A mild detergent and water is recommended for regular cleaning.
- Inspect regularly for any signs of damage and address promptly to maintain protective integrity.