FabioT. FT Paints 2K PU265 HS Chassis Topcoat - 2750ml - Green - Semi Gloss
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for owners and maintainers of commercial vehicles, trucks, and heavy-duty equipment. The FabioT. FT Paints 2K PU265 HS Chassis Topcoat offers a durable, semi-gloss finish with excellent corrosion and weather resistance, protecting chassis in harsh environments. A caveat to consider is the need for proper ventilation and personal protective equipment during application due to its chemical composition.
All features
| Colour | Green |
|---|---|
| Model Part Number | 2K PU265 HS |
| Brand | FabioT. |
| Container Volume | 2750ml |
Extended Product Information
FAQs
What is the mixing ratio for the 2K PU265 HS Chassis Topcoat?
The kit contains 1.90L of paint, 0.48L of hardener, and 0.37L of thinner, indicating a specific ratio. Always refer to the product's technical data sheet or label for the exact mixing proportions before application.
Can this coating be applied over existing rust?
While the coating is reinforced with zinc phosphate for corrosion resistance, it is best applied to a clean, rust-free surface or a properly prepared surface with a suitable primer designed for rust conversion or inhibition.
What temperature is ideal for application?
Application is best performed between 15°C and 25°C. Avoid applying in excessively high or low temperatures, or in high humidity, as this can impact drying and curing.
How long does the coating take to fully cure?
The coating achieves dust-dry in 15-30 minutes, but a full cure, meaning it reaches its maximum hardness and resistance, takes approximately 7-8 days under standard conditions.
What kind of personal protective equipment (PPE) should I use?
It is essential to wear appropriate PPE, including solvent-resistant gloves, safety goggles or a face shield, and a respirator with organic vapor cartridges, especially when working in confined spaces or areas with poor ventilation.
Can I use a different brand's hardener or thinner?
It is strongly recommended to use only the hardener and thinner recommended by FabioT. FT Paints for this specific product to ensure proper curing, adhesion, and performance. Using incompatible products can lead to failure.
What is the shelf life of the mixed product?
The pot life of the mixed product is typically limited, usually a few hours depending on temperature. Unmixed components should be stored in a cool, dry place away from direct sunlight.
Troubleshooting
Paint is not drying or curing properly
Ensure the correct hardener ratio was used and mixed thoroughly. Check ambient temperature and humidity, as these can affect curing times. Verify that the correct thinner was used and not too much was added.
Poor adhesion or peeling
The surface may not have been adequately prepared. Ensure it was clean, dry, and free from contaminants. Lightly abrading the surface before application can improve adhesion. Ensure the correct primer was used if required.
Uneven finish or runs
Adjust application technique, spray pressure, or distance. Ensure the paint viscosity is correct by using the appropriate thinner. Apply thin, even coats rather than one heavy coat.
Orange peel effect
Adjust spray gun settings (fluid tip, air cap, pressure) and application speed. Ensure proper thinning to achieve correct viscosity.
Pros and Cons
Pros
- Exceptional durability for heavy-duty applications.
- Excellent protection against corrosion and weathering.
- Professional semi-gloss finish enhances appearance.
- Strong adhesion to common chassis materials.
- Fast drying time reduces downtime.
Cons
- Requires proper ventilation and PPE for safe application.
- Full cure takes several days, limiting immediate use.
- Not suitable for all types of plastics or non-metallic surfaces.
- Specific thinner may be required for optimal results.
- Application requires a well-prepared surface for best adhesion.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) system that requires mixing the paint, hardener, and thinner in the correct ratios specified by the manufacturer before application. Ensure the surface to be coated is clean, dry, and free from grease, oil, and rust. Lightly abrading or priming the surface may be necessary for optimal adhesion.
Compatibility: The coating is designed to adhere to steel, galvanised steel, and aluminium. It is crucial to use compatible thinners and hardeners as recommended by FabioT. FT Paints. Avoid using on surfaces not listed or with incompatible coatings.
Care: While the coating is highly durable, regular cleaning with mild detergents and water is recommended. Avoid abrasive cleaners or solvents that could damage the finish. Inspect the coated chassis periodically for any signs of damage and touch up as needed.