Ft Paints Chassis Paint - 2750ml - Red
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for vehicle owners and maintenance professionals looking for a durable, high-build coating for truck and commercial vehicle chassis. The FT Paints Chassis Paint offers robust protection against corrosion and the elements with a professional semi-gloss finish. A key consideration is the requirement for a hardener and thinner, as this is a two-part system.
All features
| Colour | Red |
|---|---|
| Model Part Number | 2K PU265 |
| Brand | FT Paints |
| Container Volume | 2750ml |
Extended Product Information
FAQs
What is the mix ratio for this paint?
The exact mix ratio for paint, hardener, and thinner varies. Please consult the product's technical data sheet for the precise ratios required for your application method.
Do I need to buy the hardener and thinner separately?
Yes, as this is a 2K (two-component) system, the hardener and thinner are required for proper curing and application and must be purchased separately.
What is the coverage rate of this paint?
Coverage rates depend on the application method and surface porosity. Typically, a 2750ml kit provides coverage for approximately X square meters at the recommended film thickness. Refer to the product's technical data sheet for specific coverage information.
How long does the mixed paint last after mixing?
The pot life (working time) of the mixed paint is limited. Once mixed with the hardener, it should be used within a specific timeframe, usually 1-2 hours, depending on ambient temperature. Refer to the technical data sheet for exact pot life.
Can this paint be applied in cold weather?
While it can be applied in cooler temperatures, drying and curing times will be significantly extended. For optimal results, application is recommended within a temperature range specified on the technical data sheet, typically above 10°C.
Is this paint suitable for automotive body panels or just chassis?
This product is specifically formulated as a high-build coating for heavy-duty protection of truck and commercial vehicle chassis. While it offers a professional finish, it may not be ideal for flexible body panels or areas requiring a show-car finish without specialized preparation and clear coating.
What safety precautions should I take when using this product?
Use in a well-ventilated area, wear appropriate personal protective equipment (PPE) including gloves, eye protection, and a respirator. Avoid contact with skin and eyes. Refer to the Safety Data Sheet (SDS) for comprehensive safety information.
Troubleshooting
Paint not drying properly
Ensure correct hardener and thinner ratios were used. Check ambient temperature and humidity – painting in cold or humid conditions can slow drying. Verify the product's shelf life.
Poor adhesion to surface
Surface preparation may be insufficient. Ensure the substrate was clean, dry, and free of contaminants. Consider using a primer suitable for the substrate and this topcoat.
Uneven or rough finish
Check application technique and equipment settings. Ensure proper viscosity for the application method. Avoid applying too thickly, which can lead to runs and sags.
Bubbling or blistering
This can be caused by moisture or solvent entrapment. Ensure the substrate is completely dry before application and that ventilation is adequate during and after application.
Pros and Cons
Pros
- Provides excellent heavy-duty protection for vehicle chassis.
- Offers strong resistance to corrosion, weathering, and UV exposure.
- Achieves a professional semi-gloss finish.
- Fast drying time speeds up the application process.
- Suitable for a wide range of application methods.
Cons
- Requires separate purchase of hardener and thinner (2K system).
- Full cure time of 7-8 days may require extended downtime.
- Specific application conditions (temperature, humidity) can affect drying and performance.
- Requires proper safety precautions due to its chemical nature.
Setup, Compatibility & Care
Setup: This is a two-part coating system (2K). It requires mixing the paint with the appropriate hardener and thinner in the specified ratios before application. Refer to the product's technical data sheet for precise mixing ratios. Ensure the surface to be painted is clean, dry, and free from grease, oil, and old flaking paint. For best adhesion, it's recommended to prime the surface first.
Compatibility: The paint is designed to adhere strongly to steel, galvanized steel, and aluminium surfaces. Ensure that any existing coatings are compatible or properly prepared. It is compatible with electrostatic, Airmix, Airless, and brush application methods.
Care: Once fully cured, the finish is durable and resistant to weather and solvents. Cleaning can be done with mild detergents and water. Avoid abrasive cleaners or solvents that could damage the coating. Store unused paint in tightly sealed containers in a cool, dry, well-ventilated area, away from direct sunlight and ignition sources.